Reviews Seamless Structure Pipe

Tee Equal Diameter 316 Good Sealing Compression Ferrule Connector Tee for Solar Energy for Chemical Industry for Complicated Pipeline(Ф8)

  • 【Advantage】 Relatively common national standard connector double ferrule straight‑through connector, acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • 【Application】 Suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • 【Structure】 Compression ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • 【Good Sealing Perfomance】 When the ferrule and the nut are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • 【Reusable】 Ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble. Break the traditional installation method..
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

Floor Flange Trim Plate, Steel, 3/4 In

  • Price For: Each Inside Dia.: 3/4" Max. Pressure: 150 psi Pipe Type: Pipe Nipple Pipe Size (Nominal): 1/2" Seamless/Welded: Welded Outside Dia.: 3/4" Pipe Schedule: 40 Wall Thickness: 1/16" Temp. Range: -60 Degrees to 450 Degrees F Overall Pipe Length: 4" Pipe Connection Type: Threaded on Both Ends Standards: ASTM A 312 Item: Nipple.
  • Country of Origin (subject to change): China.
Check Stock

Good Sealing Compression Ferrule Connector Tee Effective Sealing Tee Equal Diameter 316 for Natural Gas for Complicated Pipeline for Solar Energy(Ф8)

  • ♥【Simple Connection】 The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • ♥【Application】Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • ♥【Structure】The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • ♥【Method】 When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • ♥【Easy To Operate】 Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
Check Stock

uxcell M10x100mm Wall 304 Stainless Steel Expansion Screws Closed Hook Anchor Bolts 2pcs

  • 【Size and material】M6:Length 3.43inch,Dia.0.3inch Material: stainless 304 steel which greatly protect against rust.
  • 【Widely Used】 in brick walls, fences, bathrooms, kitchens, air-conditioning brackets, well covers and so on..
  • 【Forging Process】This expansion hook is a solid structure, the punching machine is formed once, bearing a large amount, and the tensile strength is extremely strong.
  • the expansion tube is cut by a seamless steel pipe, and the tension is large after expansion, and it is strong and safe..
  • 【Load-bearing】max loading -300lbs,do not use for overhead lifting.
  • 【Package Include】 10pcs x M6 Expansion Hooks.
Check Stock

Metal Shower Head Holder for Hand Held Showerhead, Adjustable Bracket, Shower Arm Adapter, Universal Shower Arm Mount, Brushed Nickel Finish

  • *Unique design, unique structure! Solid brass construction, no worries of breaking, falling and leaking..
  • *1/2” IPS female inlet,1/2” IPS male outlet. Fits well with all the standard arm pipes and hoses..
  • *Every part is machined from the brass rod, perfectly seamless. A multi-layer plating offers excellent outward..
  • *Easy installation through a simple wrench to tighten the joint with the arm pipe till it is firmly fixed..
  • *10 YEARS’ warranty brings you a fully confidence. Any questions, e-mail to us, prompt response and service..
Check Stock

1CAMO 3-Way Tee PVC Fittings for 1 Inch PVC Pipe, SCH 40, White - 1 Inch PVC Elbow Fittings PVC Pipe Connectors - Build Heavy Duty Furniture with 1 Inch PVC Pipe (4 Pack)

  • ...ERFORMANCE: Our 3-way tee 90-degree pipe elbow fitting is manufactured with a sleek looking, glossy, white surface with tapered ends allowing for a smooth transition from the pipe to the fitting. Suitable for both indoor and outdoor use..
  • EASY TO INSTALL: These are a quick and handy solution for building any type of structure out of 1” PVC pipe, which requires PVC fittings 1 inch sizing. Each package includes FOUR, 3-way, 1 inch PVC pipe fittings enabling you to create a sturdy corner or elbow joint in projects, structures, and PVC plans!.
  • PERFECT FOR BUILDING PVC FURNITURE: These 3-way, 1 inch PVC pipe fittings are made with the highest quality material allowing for a long service life. You can use these furniture grade PVC fittings to connect PVC pipes and build the DIY projects you want..
  • WIDE APPLICATIONS: These PVC fittings are designed for building PVC furniture and structure out of PVC pipe, such as a PVC structure, greenhouse, tents, shelves, shoe racks, dog enclosure, flower stands, etc..
Check Stock

Mophorn V Head Pipe Stand Adjustable Height 28-52 Inch Pipe Jack Stands 2500 LB Capacity,Folding Portable Pipe Stands 1/2 to 12 Inch Pipe Supporting,Steel Jack Stands

  • Heavy Duty V-Head: The pipe stand with a durable V-head is suitable for the pipe size of 1/8 to 12 inches (0.32 to 30.48 cm). The steel structure of....
  • Adjustable Construction: The height of this pipe jack stand can be adjustable from 28" to 52"/71 - 132 cm to meet different needs. The locking ring....
  • Folding & Portable Design: The whole jack stand with a folding design makes storage won't take much space. The slip-proof rubber handle allows you to....
  • Great Stability: The pipe stand shows excellent stability because of its tripod structure. The rounded footpads of this stand are widened. And the....
  • Wide Application: Widely used in the welding of heavy pipes, shapes, solids, and rounds. Support pipe during pipe threading, hole cutting, roll....
Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

  • 【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • 【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
  • The wall thickness of the steel pipe that can be cut:3-6mm.
  • 【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
  • 【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
  • 【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock