Reviews Sealant For Brass Pipe Threads

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

...etween pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..

Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....

Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..

Check Stock

2-Pack Besosay Brass Reducer Hex Bushing Threaded Pipe Fitting 1 Inch NPT Male x 3/4 Inch NPT Female Adapter

✅ SPECIFICATION - Standard brass pipe fitting 1" NPT male to 3/4" NPT female reducer adapter. For connecting pipes with different ends size..
✅ MATERIAL - This brass reducer bushing adapter is made of high quality brass for corrosion resistance, high temperature ductility and low magnetic....
✅ EASY INSTALLATION - The deep threads design allows the fittings to be better engaged with the object to enhance fixation, and the smooth threads....
✅ OPERATION PRESSURE & TEMPERATURE - Max. Pressure: 150 PSI ,Temperature range：-65 to 250 F..
✅ PLEASE TAKE NOTICE - This pipe fitting can not be installed for potable water use. And, NPT thread size does not actual diameter, it is only....

Check Stock

SUNGATOR 12-Pack Air Hose Fittings 1/4 NPT to 3/8 Barb Hose Barb Adapter Brass Pipe Fittings Male Threaded End

【PREMIUM MATERIAL】: High quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, 3/8”barb X 1/4”NPT male pipe, 12 pack.
【DURABLE】: The barb fitting is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings.
【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective connection.
【FUNCTION】: Barb head for connecting hoses, NPT end used to connect NPT pipes, brass is corrosion resistant which can apply to water, gas, oil and fuel as well as air tools.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).

Check Stock

SUNGATOR 6-Pack Air Hose Fittings 1/4 NPT to 3/8 Barb Hose Barb Adapter Brass Pipe Fittings Male Threaded End

【PREMIUM MATERIAL】: High quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, 3/8”barb X 1/4”NPT male pipe, 6 pack.
【DURABLE】: The barb fitting is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings.
【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective connection.
【FUNCTION】: Barb head for connecting hoses, NPT end used to connect NPT pipes, brass is corrosion resistant which can apply to water, gas, oil and fuel as well as air tools.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).

Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....

Check Stock

U.S Solid Brass Hose Fitting Adapter 3/4 Barb x 3/4 NPT Male Pipe Fittings

FUNCTION - This 3/4" Barb x 3/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

U.S. Solid Brass Hose Fitting, Adapter, 1/4\ Barb x 1/4\ NPT Male Pipe Fittings

FUNCTION - This 1/4" Barb x 1/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

D.N. High Grade White Plumbers Teflon Tape, Plumbing Stop Leaks, Water Sealant Tape Perfect for Shower Heads, Pipe Thread Sealing and Toilet Connectors (1/2 Inch x 480')

Size and Quality: D.N. 1/2 inch white plumbers Teflon tape Thickness is : 0.004” (0.075mm), Density:1.3g/cm3, Temperature Resistance: -190°C to 370°C, Water pressure resistance:16MPa, Tensile strength: ≥8MPa, Elongation: ≥25%..
Material: Our plumber’s tape is made of PTFE material, which has high sealing and durability and gets PolyTetraFluoroEthylene Certifications: CSA 20755, UL MH25811 approved.
Water pressure resistance: Each roll of Sealant Tape has a width of 1/2 inch and a length of 480 inches which its Water pressure resistance is 16MPa, Tensile strength: ≥8MPa, Elongation: ≥25%. Our water seal tape Model is Thicker and High density..
plumbing tape has a sealing function to prevent the leakage and stop leaks, water Sealant Tape Perfect for shower heads ,Pipe Sealing, ,and Pipe Threads.

Check Stock