Reviews Sds Max Drills

VEVOR Concrete Hole Saw Kit, 1-2/11', 1-3/5', 2-9/16', 3-5/32', 3-15/16' Drill Bit Set SDS Plus & SDS MAX Shank Wall Hole Cutter w/a 4-1/3' Connecting Rod for Concrete, Cement, Stone Wall, Masonry

  • ...ip removal hole can quickly remove dust, thus preventing clogging..
  • Premium Material: Hole saw for masonry is made of high-quality carbon steel. It is sturdy and durable. They are sharp enough to open the wall and wear-resisted. And the connecting rods with 40CR steel are rigid and not easy to break..
  • For most Hammer Drills: The shank of the connecting rod adopts SDS PLUS and SDS MAX design, which is compatible with four-hole and five-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
  • Wide Application: This masonry hole saw can drill through common walls and floors made of brick, concrete, cement, and stone. It makes installing air conditioners, water pipes, water heaters, smoke pipes, sewers, etc. easier..
Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

  • ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
  • ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
Check Stock

REETAI-FOUR 9Pcs SDS Plus Concrete Hole Saw Kits, Tungsten Carbide Wall Hole Cutter Cement Stone Drill Bit Sets with Connecting Rod for Brick Stone Concrete Cement.

  • ...ed with high-quality and tough raw material, which is thicker and sharper than other common blades. The multi-edged blades of the hole saw are designed to make your drilling cleaner, faster, and more efficient. The chip removal hole and inner groove can quickly remove dust, thus preventing clogging..
  • FOR MOST HAMMER DRILLS: The shank of the connecting rod adopts SDS PLUS design, which is compatible with four-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
  • WIDE APPLICATION: This concrete hole saw kit easily drills through most common wall materials (brick, adobe, concrete, cement, and stone). It makes installing air conditioners, water pipes, water heaters, smoke pipes, sewers, etc. easier. You can order worry free and start using this hole saw kit for your home improvement projects right away..
Check Stock

KSEIBI Variable Speed Rotary Hammer Drill 1-1/4 inch, SDS Plus Demolition Hammer for Concrete Drill 13Amp, 4 Functions Reduced Vibration System

  • ...comfortable handling and optimal control with Vibration Reduction System ensures optimal working comfort and low vibrations side handle for secure two-handed control and low vibrations while using the electric chisel hammer.
  • SAFETY CLUTCH offers protection if the bit ever gets jammed while using the power demolition drills & hammers drill in any tasks such as brick chipping, tile, and floor removal, or even making holes in concrete, masonry, metal, or wood..
  • POWERFUL DESIGN SDS plus hammer drills for concrete heavy duty with Active Vibration Reduction (AVR) dampening sds drill rotary hammer can help reduce hand-arm vibration through decoupling internal parts from the outside casting..
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

16\ Tungsten Carbide Grinding Disc for Floor Machines

  • Premium Material: Made of high-grade forged and heat-treated steel, hard and durable. The long shaft is made with 40Cr steel for maximum elasticity and energy transfer. The 65Mn steel blade keeps its edge, strength, and durability even under punishing use..
  • Special Threads Design: The bolts have a special threads design in order to become more tighter as you tiding the nuts, preventing the bolts to become loosed due vibrations..
  • Broad Compatibility: It is compatible with SDS-Max hammer drills by all manufacturers, such as Bosch, DeWalt, Makita, Milwaukee, Hilti, and the rest..
  • Wide Application: It works great for scrapeing job, like removing Ceramic Tile, Thinset, Carpet, Epoxy, Vinyl and other dried stubborn adhesives removal, also in removing the glued down wood floors and hardwood floor..
  • What You Get: 1Pc 6 X 25 Inch SDS Max floor scraper, 4Pcs extra screws for replacement and friendly customer service..
Check Stock

6 Pcs SDS Max Chisel Set Hammer Drill Chisel Set 3/4 inch Masonry Concrete Chisel Drill Bits HOLAN 11-inch Length Rotary Hammer Chisel Bits Including 50mm Wide Chisel 25mm Flat Chisel Point Chisel

  • High Strength Material: Chisel drill bit is made of chromium vanadium steel material, can avoid breakage, and can resist wear, oxidation and corrosion.
  • Slotted Drive System: SDS (or Slotted Drive System) bits for hammer drills/rotary hammers allow the bit to slide in the chuck and enhance the....
  • Sharpened Tops: Specially sharpened top gives continuously effective breaking on various masonry objects, such as brick, concrete, stone, tiles,....
  • Special Face Treatment - The surface of SDS Max drill bit is processed rough, increasing toughness and hardness, and reducing wear to a greater extent.
  • Rotary Hammer Drill Bits: Our SDS Max chisel bit set included 2pcs point chisels, 2pcs 25mm flat chisels, 2pcs 50mm wide chisels.
Check Stock

RVIQI 9PCS Concrete Hole Saw Set,Tungsten Steel SDS Plus Shank Masonry Wall Hole Opening Drill Bits for Brick, Concrete, Cement Stone

  • PACKAGE INCLUDED- 5 PCS Hole Opener：1-2/11”(30mm), 1-3/5”(40mm), 2-9/16 “(65mm), 3-5/32”(80mm), 3-15/16”(100mm).
  • 2PCS SDS connecting rod: SDS 11-13/16”(300mm), SDS max 11-13/16”(300mm).
  • HIGH MATERIAL- Our concrete hole saw set is made of tungsten steel and carbide, durable and works under rough conditions,but also super safe to use and simple..
  • UNIQUE BLADE DESIGN- The concrete hole saw’s blade is made of raw materials, thicker and sharper than other ordinary blade. Can easily penetrate steel bar up to 6mm..
  • WIDE APPLICATION- The masonry wall cutter bit kit fits SDS plus hammer drills. Perfect used for Brick, concrete, cement, stone, mixed brick wall, foam wall and installation of air-conditioner..
  • LIFETIME GUARANTEE- We focus on the quality of products and care about your satisfaction. If you have any question, please contact us by email or Q&A, the reply will be provided within 24 hours..
Check Stock

REETAI-FOUR 17 PCS SDS Plus Rotary Hammer Drill Bits & Chisels Set, Concrete Masonry Hole Tool with Storage Case,Carbide Tipped for Brick, Stone and Concrete.

  • [PACKAGE INCLUDED]: 13×Drill Bits, 1×Point Chisel, 2×Flat Chisel, 1×U-groove Chisel, A variety of sizes to meet your different needs..
  • [INDUSTRIAL MATERIALS]: 40Cr carbon steel, YG8 carbide tip, sturdy and durable.Premium carbon steel with heat treatment improves core strength for maximum durability and extended life..
  • [MULTI PURPOSE]:This set is perfect for working on concrete, masonry, wall, bricks, stone and road..
  • [EASY TO USE]: The SDS PLUS shank is suitable for most rotary hammer drills and meets most of your needs. SDS chisel matches the electric hammer drill , such as Bosch, Hilti, Milwaukee, Makita, Dewalt drills and other SDS/SDS Plus drills, etc..
  • [CARRY CASE] : Supplied in a light, portable plastic case for easy transport and storage.All the bits and chisels are fixed in the slots in the case.If you have any question about product, please feel free to contact us by email or Q&A, the reply will be provided within 24 hours..
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock