Reviews Screws For Trex Decking

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ... + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ... + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Evo Dyne Deck Cleaner (1-Gallon) | Composite Deck Cleaner for Fiberglass, Painted Surfaces, Vinyl, & More, Made in USA -Wash Grime out of Non-Slip Surfaces & Protect from Future Stains

  • PREMIUM CONCENTRATED FORMULA - Cleans an impressive 1500 Sq.Ft. Developed for professionals now available to everyone..
  • BRUSH INCLUDED! - We included a high quality, natural bristle brush to make this the perfect kit for your wood or composite deck!.
  • DESIGNED FOR USE ON - Timbertech, Trex, Fiberon and all composite and wood decking..
  • ZERO VOC's - Free of volatile organic compounds! NO SOLVENTS - Free of any harmful solvents!.
  • ELIMINATES STAINS - This powerful, concentrated composite and wood cleaner is specifically formulated to remove environmental black and green staining on composite and wood decking. In addition it releases ground in dirt and grease from your composite or wood decking, making it look squeaky clean!.
Check Stock

CAMO EDGEXMETAL Clip Hidden Deck Fasteners (450 ct)

  • For any angled installation of grooved decking—hardwood, composite, capped composite, and PVC.
  • Works with any 14–18GA metal framing, including Fortress Evolution and Trex Elevations.
  • Fasten EDGEXMETAL Clips with the included NEVER-MISS Guide or with the CAMO DRIVE stand-up tool using a drill—do not use an impact driver.
  • Up to 88% stronger than leading deck board manufacturer’s clips in lateral movement tests.
  • 450 count covers approximately 250 square feet (23m2) and creates a 3/16-inch (4.7mm) gap.
Check Stock

Pro Plug System for Fascia Plug & Screw Kit - Trex Rocky Harbor Fascia Plugs & Stainless Steel Screws- 9 x 1-7/8\ T-20 Star Dr- 100 Pieces

  • Stainless Steel Fascia Screws for ultimate corrosion resistance.
  • Plugs cut from actual Trex board for the perfect match.
  • Use the Pro Plug System for Fascia for a beautiful fastener free finish.
  • Kit includes Trex plugs, stainless steel screws and fascia bit.
  • Must be installed with the Pro Plug Fascia Tool Set - NOT INCLUDED.
Check Stock

Suiwotin 60PCS 10mm (3/8\) Black Hole Plugs Plastic Flush Type Hole Plugs Snap in Locking Hole Tube, Furniture Fencing Post Pipe Insert End Caps (Black)

  • Stainless Steel Fascia Screws for ultimate corrosion resistance.
  • Plugs cut from actual Trex board for the perfect match.
  • Use the Pro Plug System for Fascia for a beautiful fastener free finish.
  • Kit includes Trex plugs, stainless steel screws and fascia bit.
  • Must be installed with the Pro Plug Fascia Tool Set - NOT INCLUDED.
Check Stock

Topdex Hidden Deck Fasteners - Strong Plastic Clips with Stainless Steel Screws Inserts 0.19' Gap Spacing Between Wood Flooring Boards - Outdoor Decking Hardware, (90 Clips - 50 sqft)

  • A Sleek-Looking Deck – Build your decking like a pro with the help of these plastic fasteners. These flooring spacers let you mount your boards to the joists while keeping the screws hidden from sight..
  • Consistent Gap Spacing – Maintain the streamlined look of your decking and balcony flooring with these clips. Each plastic clip is designed to create a 0.19″ gap in between your terrace boards..
  • Easy Installation – Save time, effort, and energy in building your deck. To mount, just insert the clip into the side groove of your decking board, drive the screw with your drill, and you’re all set..
  • Crafted To Last – The last thing you need are decking clips that easily break. Our clips are made of tough plastic, while the screws are made of stainless steel that withstands rust or corrosion..
  • Decking Tools With Unbeatable Value – Get the most out of your money whenever you purchase our decking fastener clips. Each pack comes with plastic fasteners and stainless steel mounting screws..
Check Stock

FastenMaster Cortex Hidden Fasteners -Trex Transcend - Havana Gold - 100 Lin.

  • The Cortex Hidden Fastening System is the fastest, easiest way to hide fasteners in composite, cap.
  • Includes-TORX ttap Drive System: This system is almost impossible to strip-out and the fastener is.
  • Available in: Trex Select (100 lineal foot and 300 sq ft) Trex Transcend (100 lineal foot and 300.
  • All screws, plugs, and setting tools are included in every box.
Check Stock

DeckMAX Concentrated Composite & Wood Deck Cleaner Kit - Nation’s Leading Wood & Composite Deck Cleaner Recommended by Manufacturers Distributors & Contractors!

  • PREMIUM CONCENTRATED FORMULA - Cleans an impressive 1500 Sq.Ft. Developed for professionals now available to everyone..
  • BRUSH INCLUDED! - We included a high quality, natural bristle brush to make this the perfect kit for your wood or composite deck!.
  • DESIGNED FOR USE ON - Timbertech, Trex, Fiberon and all composite and wood decking..
  • ZERO VOC's - Free of volatile organic compounds! NO SOLVENTS - Free of any harmful solvents!.
  • ELIMINATES STAINS - This powerful, concentrated composite and wood cleaner is specifically formulated to remove environmental black and green staining....
Check Stock

304 Stainless Steel Start Clips Black Deck Clips Universal Decking Clips with Decking Screws for Composite Deck Boards, Hidden Fasteners (40)

  • Stainless Steel Material: starter clips are made of quality 304 stainless steel, strong texture, corrosion resistance, not easy to fade or break, suitable for outdoor installation, can play a nice fastening effect, to provide you with long term service.
  • Use Occasion: composite decking starter clips are applied to install composite decking with grooves on the sides, which conceal themselves while holding the deck in place, making them practical and attractive.
  • Installation Method: place the hidden deck fasteners for composite on the floor joists and fix them with screws, one every 12 to 16 inches, then push the floor into the card, easy to apply, will not waste a lot of your time and effort.
  • Rich Quantity to Meet Your Needs: the package includes 40 pieces of hidden deck clips, plenty quantity to meet your use demands, replacement demands and sharing demands, can give you a nice shopping experience.
  • Equipped with Screws: each starter clips for composite decking comes with a suitable stainless steel screw, easy to install, which can save you the trouble of buying screws and bring you a nice use experience.
Check Stock