Reviews Screwdriver Racks

WEDO Non-Sparking Slotted Screwdriver, Spark-free Safety Flat-head Screwdriver, Aluminum Bronze, DIN Standard, BAM & FM Certificate, 7Inch, 6 * 100mm

  • 【WHAT YOU’LL GET】1pc 30-Tooth Full Aluminum Ratcheting Screwdriver, H4mm x 50mmL Bits in Phillips: #000 / #00 / #0 / #1, Slotted: 1.0 / 1.5 / 2.0 / 2.5 / 3.0 / 4.0, Torx: T5 / T6 / T7 / T8 / T9 / T10 / T15, Hex: H1.5 / H2.0 / H2.5, S2 Bits in Phillips: #1 / #2 / #2 / #3, Slotted: 4 / 6mm, Torx: T20 / T25, Square: S1/S2. It also features a Magnetizing tip to hold bits..
  • 【SLEEK & MINIMALIST DESIGN】Slim, Sleek, Black and in Full Aluminum. Not only this is one of the most handsome screwdrivers, we also paired this screwdriver with the most essential bits needed for most kinds of tasks so you will definitely not regret adding this to your collection! Conveniently stored in a dual-colored foam tray and bits secured in bits racks with clear size markings. It’s gonna be so easy to retrieve your desired bits as well as to store them back!.
  • 【FORWARD & REVERSE RATCHETING】30-Tooth Ratcheting Mechanism with Forward, Reverse and Lock positions, especially useful in tight and confined spaces. The mini size drive handle is only 5.2” long and 3/5” wide, small and light enough for operation in confined places, especially in awkward places like U shape corner, lateral surface, etc..
  • 【SMOOTH & PRECISE】Made of aluminum, it ensures smooth ratcheting i....
Check Stock

8269145 Undercounter Dishwasher Mounting Bracket with Screws by Beaquicy - Replacement for Whirl-pool Ken-more Dishwasher - Replaces WP8269145 WP8269145VP (Pack of 2)

  • ✅【INSTALLATION TIPS】- Disconnect your dishwasher from its power and water source before starting the 8269145 dishwasher mounting bracket. If your hose and power cord don’t have enough slack, you’ll need to disconnect the hose and wiring. Helpful tools include a Phillips head screwdriver, 5/8-in. wrench, flathead screwdriver, 9/64-in. hex head screwdriver, and a towel..
  • ✅ 【REPLACEMENT PART No.】 - Bracket 8269145 replaces WP8269145VP, 830941,AP6012289, PS11745496, EAP11745496, WP8269145.Bracket wp8269145 is made exactly fit for most top name brands like Whirl-pool, Ken-more, Jenn-Air, Ama-na, Estate, Magic-Chef, Inglis, Roper and other brands..
Check Stock

Signature Design by Ashley Shianne Multifunctional Metal Floor Lamp & End Table, Black

  • ...inished metal pairs beautifully with antiqued brown wood. A creamy white shade reins in the look.
  • TALL LAMP: Tall and slender, this standing lamp with 3-way switch is the perfect addition for a living room or office space. Measures 15.25" W x 19.25" D x 57.75" H.
  • ASSEMBLY REQUIRED: Instructions and hardware included. Screwdriver (not included) is needed for full assembly.
  • DIRECT FROM THE MANUFACTURER: Ashley Furniture goes the extra mile to package, protect and deliver your purchase in a timely manner.
  • BUY WITH CONFIDENCE: Designed and manufactured by Ashley Furniture Industries. The trusted source for stylish furniture, lighting, rugs, accessories and mattresses. For every taste and budget bedroom ikea floor lamps bedrooms light mat blue bulbs lightning deals lights brightech furniture lam lamparas set of 2 led torchiere nightstand bed chair fan jack mats cars home suv trucks mirror protectors legs rug steamer tiles vase oil lampe berger clear desk table kit large stainless steel turquoise shades usb port lampshade 60 watt covers fixture fixtures ceiling cover timer therapy touch bedside that.
Check Stock

12 Sets Snowboard Wall Mounts with Screws Portable Snowboard Floating Hanger Ski Snowboard Display Mount for Easy Hanging Displaying Storage

  • Adequate quantity: you will get 12 pieces of snowboard wall mount racks and 12 pieces of screws, they can match together very well.
  • The sufficient quantity is great for your different needs, you can also share them with families and friends.
  • Easy to install: you just need to use a screwdriver (not included) to install the snowboard display mounts.
  • It only takes you few minutes to finish the process.
  • You can hang up the snowboard or skateboard to add embellishment to the room and your friends who likes art will appreciate your installation.
  • Stable and convenient: the solid snowboard racks are lightweight but feature good stability function, ensuring the snowboard and skateboard can stay on the wall stably and firmly.
  • It is also easy to disassemble for repeating use.
  • Detailed size: the snowboard display mount is approx. 0.8 inch/ 2 cm in height and 0.6 inch/ 1.5 cm in diameter, which is small and portable to carry.
  • These snowboard floating hangers can match with your skateboard nicely.
  • Easy to store: designed in small and lightweight shape, these snowboard display wall mounts can be stored in a plastic box.
  • You don't need to worry about losing or taking too much of your space.
  • They can help you hang up the snowboards easily.
Check Stock

Naikozmo 4 Pack Kayaks Storage Racks, 20.5 Inch Heavy Duty Canoe Hangers, Wall Mount Hooks for Stand Up Paddle Boards, Surfboards, SUP, Ski, Snow Board

  • KAYAK RACKS – wall storage hanger has approximate 20.5Inch gap to hold a kayak, canoe, paddleboard (SUP), snowboard, wakeboard, surfing board and sports equipment..
  • SECURE STORAGE – This kayak holder is made of durable, rust-resistant steel and is coated with a protective, weather-resistant powder, And use 5mm thick EVA protector to wrap the steel, safely store equipment up to 100lbs..
  • ADDED SECURITY - Each kayak hanger has straps that can adjust to the size of any size personal watercraft, preventing the canoe, kayak, Ski board, ladders from slipping off, nylon straps length 6.6ft..
  • VERSATILE USE – Maximize your floor space with this 4 pcs (2 pairs) of storage hooks for off the ground kayak storage. These versatile kayak storage racks for for indoor or outdoor storage in your garage, shop, storage room, showroom, on the side of your house, or near your dock..
  • EASY TO INSTALL – Installing drywall anchors is a simple process. Drill a hole in the spot you marked. Make sure the hole you drill is deeper than the anchor's length. Finally, insert the drywall anchors into the hole. Lastly, screw the bolt by using a screwdriver..
Check Stock

The Hillman Group 370054 Toggle Bolt, 3/16X3-Inch, 50-Pack

  • ...hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
  • 【Wide Applications】It can be used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches, what’s more, the product is highly adaptable, it can be installed quickly with a normal screwdriver..
Check Stock

Screwdriver Organizer, Metal Plier Organizer Hammer Rack Screwdriver Holder Hand Tool Organizer and Storage Rack Wall Mount for Garage Workshop Workbench - 4 Pack

  • ✨【Organize & Saving Space】4 Packs screwdriver organizer wall mount helps you organize your messy workbench, perfectly organize all the tools, making it visible and within easy reach. It’s a great idea for keep your tools neatly organized and out of the way..
  • 【Large Storage Space】 4 Pack tool holder wall mount of diversified and vertical design can holder screwdrivers pliers hammers and other accessories such as power tool battery chargers, drill bits, spray paint, tape measures, etc, suitable for most daily tools..
  • 【Strong and Durable】 Compared with wooden tool storage racks, our metal tool storage racks are more durable, will not rot and crack, rust-proof, and have a strong load-bearing capacity. The surface is treated with a spotted pattern, which is more beautiful..
  • 【Easy to Install】: The package contains mounting accessories such as screws. You can easily mount the hand tools organizer on the ,concrete, brick wall, wooden cabinet, or any other place. Great for installing in garage, workshop, workbench..
  • 【Perfect Gift】This tool organizer is especially suitable as a Father's Day gift and birthday gift for father, husband, and friend. If you have any questions, please contact us, we have a professional customer service team to so....
Check Stock

MIND&ACTION Skateboard Wall Mount Rack Board Display Wall Holder,Adjustable Storage Layers Space Saving Design,Versatile Wall Rack for Longboards Scooters Snowboards Skis (3 Board)

  • Solid but lightweight skateboard wall mount display rack made of molded hard ABS plastic material,suitable for skateboards of any size, such as longboards, decks, ski boards, snowboards ,surfboard or kite board, let your gear take pride of place..
  • The skateboard wall racks can be assembled into multiple layers ,You could DIY the wall mount per you desired by increasing the quantities ,good display and super organizer to realize your personal customization..
  • The skateboard wall storage hangers give you the best services and usually safeguard your skateboard in such a way that it cannot be messed around with the kids. The racks are multipurpose for you can easily store other types of boards like this used in surfing and snowboarding among others..
  • Package included all the wall-mounting hardware you’ll need to place this skateboard display rack on drywall or wall studs, you will need to parepare the tool ( screwdriver or drill ) to install the screws and anchors..
  • 100% Money Back Guarantee - We want to keep your life as simple and stress-free as possible. Soif you’re not satisfied with this skateboard hanger set, let us know and we’ll give you a full refund, no questions..
Check Stock

Beaquicy DD94-01002A Assembly-Install Kit – Replacement for Sam-sung Dishwashers – Includes 2 Mounting Brackets and Mounting Screws – Replaces AP4450818 2077601 PS4222710

  • ...oes missing, you need to replace it to keep your kitchen safe..
  • ✅ 【PACKAGE INCLUDES】- DD94-01002A samsung dishwasher brackets and clips Contains 2 Brackets And 6 Screws(3 Different Sizes). The size of mounting bracket is approximately 3.08 inches in length, 0.58 inches in high. Tools needed: phillips head screwdriver, flat head screwdriver, 5/8 inch wrench, 9/64 inch hex head screwdriver, pliers.
  • ✅ 【WIDE APPLICATION】- The samsung dishwasher mounting bracket DD94-01002A replaces 2077601, AP4450818, PS4222710, EAP4222710, PD00007402. Replaced the models of Samsung dishwashers like DMT400RHS/XAA, DW80F600UTS/AA-01, DMR78AHS/XAA-00, DW80K5050US/AA-00, DW80K5050US/AA-01, DW80K5050US/AA-02, DW80K5050US/AA-03, DW80F600UTB/AA-01 DW80F600UTW/AA-01, DW80K5050UG/AA-00, DW80F800UWS/AA-01, DW80K7050UG/AA-00, DW80J3020US/AA-00, DW80K7050US/AA-00.etc.
  • ✅ 【WELL CONSTRUCTED】- DD94-01002A Dishwasher Assembly-Install Kit is made from durable high quality material, well-tested by the manufacturer, well constructed, perfectly sized, can be used for a long time. Fast Amazon official logistics, Installed easily, saving you time and energy..
Check Stock

uxcell 12Pcs 12mm x 60mm Plastic Expand Expansion Nails Wall Expandable Tube Connector Screws Bolts

  • With elastic wings for fixing and distributing the weight of the fixed object to a larger area.
  • Can be used for hollow brick, gypsum board, cement fiberboard, board, etc.
  • The installation is simple and quick with a common screwdriver.
  • Made of high quality galvanized carbon steel, rust proof, corrosion resistant, uniform coating, strong adhesion and long service life. It is suitable for the installation of lamps, curtains, photo frames, coat racks, power switches, etc.
Check Stock