Reviews Screw pin

SUBANG 40 Pieces Pin Keepers Pin Locks Pin Backs Locking Clasp Locking Pin Keeper Backs with 4 Wrench All in Storage Case,9mm x 6mm

  • Package includes 40 pieces pin backs with 40 pieces strews, 4 piece of locking tools,enough quantities for your need, all in a small clear storage case packed to avoid locking pin backs losing..
  • Locking pin keepers are 6 mm in diameter,9 mm in height,small screws are 3 mm in length,the locking tool is 4.5cm..
  • Pin keepers are made of nickel-plated copper material,which makes them sturdy,durable,reusable and features smooth surface,doing a good job in locking your pins firmly..
  • Pin keeper backs are suitable for pins,insignia,name tags,display books,lanyards,bags,vests,hats,badge,collectibles,Disney pin Locks and so on.You can pin your badge on anywhere you want..
  • How to use:put the black screw into the middle hole,then use a small wrench to screw half of the black screw to ensure that the fixed,fixed into the brooch or medal needs to be fixed to the other two ends of any small hole,then use a wrench to tighten the black screw gradually,to ensure that the fixed,that could be easy to use..
Check Stock

Poyiccot 3.5mm Speaker Wire Adapter, 3.5mm (1/8") 4 Pole Stereo TRRS Male Jack to AV 4 Screw Terminal Block Balun Connectors Cable 30cm (3.5mm M/ 4pin)

  • Speaker Wire to 3.5mm Cable with Connectors 1: 3.5mm 1/8" TRRS (4-Pole) Male jack, Connectors 2: AV 4-Pin Screw Terminal Block jack,please note: Did not when when attached to wifi projector.
  • 3.5mm screw terminal cable,connecting single wires with open cable heads to your 3.5mm jack..
  • 3.5mm 1/8'' trrs cable, it has four total conductors - three signal and a ground as opposed to a more common stereo jack's two..
  • No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. Wiring diagram: PIN 1 - red wire.
  • PIN 4 - black wire. OMTP standard: PIN1 - Left channel.
  • PIN 4 - Ground. CTIA standard: PIN1 - Left channel.
  • 3.5mm trrs plug cable is more convenient to use more quickly without welding, and you can use the 22-18 gauge to connect..
Check Stock

Traxxas E-Maxx Brushed UPPER & LOWER SUSPENSION A-ARMS, HINGE PINS & SPACERS

  • Four (4) Front & Rear Upper Suspension Arms (Part # 5131R) Four (4) Front & Rear Lower Suspension Arms (Part # 5132R) Eight (8) Hardened Steel Suspension Screw Pins (Part # 5161) Specifications: Lower Screw Suspension Pins 3x63mm Upper Screw Suspension Pins 3x70.5mm Four (4) Caster Spacers and Four (4) Shims (Part # 5134) Nylon Construction (Part # 5131R x 2) (Part # 5132R x 2).
  • Includes: 2 Upper Suspension Arms (Part # 5131R x 2) 2 Lower Suspension Arms (Part # 5132R x 2) 8 Suspension Screw Pins (Part # 5161) 4 Caster Spacers w/Shims (Part # 5134) - This product is NEW in OEM Retail Packaging..
  • Important Note: The first image is for illustration purposes only. Please refer to the product description for exact contents..
  • Requires Assembly: This product is NOT ASSEMBLED. Any assembly pictured is for illustration purposes only..
  • Part number(s) included (in factory packaging): 5131R 5132R 5161 5134.
Check Stock

Toptekits 2 Port USB 3.0 A Female Screw Panel Mount to Motherboard 20 Pin Flat Cable Cord by Toptekits, 1.6ft/0.5m

  • Toptekits Dual Port USB 3.0 Female Screw Mount Panel Type to Motherboard 20 Pin Flat Cable 1.6ft/50cm.
  • Dual Port USB 3.0 Female Screw Mount Panel Type to Motherboard 20 Pin Flat Cable, You can use USB 3.0 type-A female convert USB3.0 (20pin Header) directly connected to the motherboard.
  • USB 3.0 port x 2 switch to USB 3.0 20 pin cable.
  • The usb 3.0 A female connector can screw at the Panel.there are screw Mount holes at USB 3.0 Female end. Length: 50cm/1.6ft.
  • Flat slim Black color cable, Package Included: 1 x 50cm/1.6ft Cable.
Check Stock

Shutter-Lok Shutter Fastener - Black

  • Window Pro White 3 inch shutter Pin Screw Fasteners easily installs in stucco, brick, siding and more Adds a "button" to your shutter appearance, One piece vinyl construction.
  • Permanent weatherproof installation, Our White Shutter pins screw fasteners have Reverse barbs prevent backing out.
  • Our White 60 count Shutter pins holds in any material - no studs necessary, No rusting Large head won't pull through shutter - even in high winds.
  • These White Shutter Pins Screw Fasteners are close to 3 inch in Length and Can Be Used To Install on Any Vinyl Shutter On Any Type Of Siding Material Such As Wood, Aluminum, Vinyl, Stucco, Brick, Masonry or Hardboard.
  • Made in USA Shipped From USA Fast FREE Shipping Included Order yours Today! WE SHIP SAME DAY ON MOST ORDERS..
Check Stock

EuTengHao 100 Pieces Pin Locks Pin Backs Locking Pin Backs Pin Keepers Locking Clasp Locking Pin Backs Keepers 9mmx5.5mm,Silver

  • Package Includes 100 locking pin keepers and 10 locking tools (allen wrench tool). The color is silver..
  • Suitable for locking pin backs also are suitable for pins, insignia, name tags, display books, lanyards, bags, vests, hats, badge, collectibles and so....
  • Perfect Size: Size of locking pin keepers are 5.5 mm in diameter, 9 mm in height and the locking tool is 4.5cm..
  • These bulk pin backs are made of nickel-plated copper, durable and anti-rust. Smooth surface, sturdy and lock your pins firmly, without worrying they....
  • How to use: Put the black screw into the middle hole, then use a small wrench to screw half of the black screw to ensure that the fixed, fixed into....
Check Stock

Tnisesm/60pcs 2 Pin & 3 Pin 5mm/0.2inch Pitch PCB Mount Screw Terminal Block Connector (Can be Spliced) TN-T03G

  • Product Type: Boxed 2 pin & 3 pin Screw Terminal Block Connector, with a phillips screwdriver..
  • Package include: 40pcs x 2 Pin Screw Terminal Block Connector.
  • 20pcs x 3 Pin Screw Terminal Block Connector.
  • 1pcs x phillips screwdriver. All packed in a plastic container for easy use..
Check Stock

Tnisesm/70pcs 2 Pin & 3 Pin 5mm/0.2inch Pitch PCB Mount Screw Terminal Block Connector (Can be Spliced) TN-T03B

  • Product Type: Boxed 2 pin & 3 pin Screw Terminal Block Connector, with a phillips screwdriver..
  • Package include: 60pcs x 2 Pin Screw Terminal Block Connector.
  • 10pcs x 3 Pin Screw Terminal Block Connector.
  • 1pcs x phillips screwdriver. All packed in a plastic container for easy use..
Check Stock

Link- watch adapter compatible with LEATHERMAN TREAD - Black (Lug size 24mm, Black, TREAD)

  • USPTO PATENT PENDING: 62529724 - EFSID29718818******Disclaimer: this product is not associated with Leatherman Tool Group Inc. Any usage of the Leatherman and/or associated trademarks is only to describe the products bearing those marks..
  • Box content: A pair of watch adapter for TREAD OR TREAD LT, pin tool, watch pins or adapters compatible with Apple watch. ^^^^^ You will receive everything to easily change the band of your watch with TREAD / TREAD LT barcelet^^^^ See the lug width measurement instruction picture to choose the proper size of watch Link for your watch. If you watch has an odd-numbered lug width, select the next size down..
  • Available in Black and Stainless Steel.^^^^ Watch and TREAD / TREAD LT bracelet not included..
  • COMPATIBILITY: For sizes 16mm, 18mm, 20mm, 22mm, 24mm, and 26mm: Ensure that your watch has normal straight spring bars (pins), NOT screw pins or curved spring bars.*****Compatible with Leatherman TREAD / TREAD LT. ^^^^ NOT compatible with counterfeit TREAD / TREAD LT. Counterfeit bracelets have a different screw size..
  • COMPATIBLE with G-SHOCK (almost all models **screw pins, normal pin spring bar, fat spring bars**).
  • NOT compatible with G-Shock GA1000 and GW3000B (center lug band).
Check Stock

Pin Keepers Pin Locks Locking Clasp Pin Backs with Wrench (24 Pieces)

  • DIMENSIONS: Locking pin keepers are 5mm (0.2 Inch) in diameter, with a height of 7mm (0.28 Inch). Each set comes with 24 silver locking pin backs and 2 Allen wrenches (locking tools)..
  • HIGH QUALITY & SECURE: Has a shiny and smooth silver finish. Made from sturdy nickel plated iron that will resist rust. Designed to secure your pins by locking them firmly in place..
  • EASY TO USE: To use, simply insert the pin post into the pin keeper and use the micro hex tool to tighten the screw, locking your pin in place. Each pin lock has the small screw already started for you, so you do not have to mess with small parts..
  • VERSATILE: Great for securing pins, badges, insignias or name tags onto your uniform, vest, cap, hat, jacket, bags and more! Have confidence knowing you will not lose your pins due to them falling off..
  • 100% SATISFACTION GUARANTEE - Purchase with confidence! We stand by our products and offer a 30 day money back guarantee, no questions asked!.
Check Stock