Reviews Screw Type

#8 x 1-1/4 Deck Screws 316 Marine Grade Stainless Steel Square Drive Type 17 Wood Cutting Point Quantity 100 Size Number 8 x 1-1/4 Long by Fastenere

  • Screw Size #8 (0.164") - Straight Pilot Drill size for Soft Wood 7/64 . Straight Pilot Drill size for Hard Wood 1/8.
  • Screw length measured from top of flat to tip of screw 1-1/4" (1.25") - Screw head Diameter 0.340".
  • Made of highly corrosion resistant 316 Marine Grade Stainless Steel. Type 316 is also used extensively for surgical implants within the hostile environment of the body..
  • Deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface.
Check Stock

60pcs Thread Insert Kit 304 Stainless Steel Wire Screw Sleeve Thread Repair Insert Assortment Kit

  • USED FOR:Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • A CERTAIN ELASTIC:Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • BETTER THAN THE NORMAL LOCKING DEVICE:The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • CAN BE USED REPEATEDLY:The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw, and can be used repeatedly.
  • EXCELLENT CONNECTION PERFORMANCE:Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock

#4-40 x 1 18-8 Stainless Steel Vented Socket Head Cap Screw

  • Price For: Each System of Measurement: Inch Screw Industry Standards: ASME B18.3 Drive Type: Hex Socket Rockwell Hardness: B70 to B95 Basic Material: Stainless Steel Head Height: 0.112" Head Dia.: 0.183" Thread Dia.: #4 Drive Size: 3/32" Fastener Finish: Plain Vented Hole Size: 0.035" Screw Style: Socket Head Cap Screw Material Grade: 18-8.
  • Thread Direction: Right Hand Temp. Range: 250 Degrees F Screw Head Type: Vented Item: Vented Socket Head Cap Screw Min. Tensile Strength: 80, 000 psi Dia./Thread Size: #4-40 Thread Style: Partially Threaded Thread Length: 3/4" Length: 1" Country of Origin (subject to change): Multiple.
Check Stock

100PCS M10 Wire Screw Sleeve,Thread Repair Insert Kit,Stainless Steel Thread Locking Inserts,for Aircraft, Automotive, mechanized Fasteners

  • Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw,and can be used repeatedly.
  • Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock

1/4-20 Brass Push in Threaded Insert 0.5\ Long (50 pcs)

  • 【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
  • 【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
  • 【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
  • 【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
  • 【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..
Check Stock

5/16 -18 x 1 18-8 Stainless Steel Vented Socket Head Cap Screw 5 pk.

  • Price For: Each Drive Type: Hex Socket System of Measurement: Inch Screw Industry Standards: ASME B18.3 Fastener Finish: Plain Thread Direction: Right Hand Temp. Range: 250 Degrees F Thread Dia.: 5/16" Length: 1" Basic Material: Stainless Steel Item: Vented Socket Head Cap Screw Min. Tensile Strength: 80, 000 psi Head Height: 0.313" Head Dia.: 0.469".
  • Screw Head Type: Vented Rockwell Hardness: B70 to B95 Screw Style: Socket Head Cap Screw Thread Style: Fully Threaded Material Grade: 18-8 Thread Length: 1" Vented Hole Size: 0.078" Drive Size: 1/4" Dia./Thread Size: 5/16"-18 Country of Origin (subject to change): Multiple.
Check Stock

E-cowlboy Valve Clearance Adjustable Wrenches, 2218 Small Engine Valve Tappet Adjusting Tool 6 Piece Set Tappet Adjuster，for Motorcycles ATV`S and ATC`S

  • Fit for adjusting motorcycle engine valve screw, Loosen all screws, nuts.
  • For automobile maintenance, household use, machine repair.
  • T type and L type Interface adjuster allows for Hexagonal and square screw adjustment.
  • Made of quality metal, high strength and durable, Lightweight and small in size, easy to carry.
  • Package Includes: 3 x L type Valve Screw Wrench, 2 x T type Spanner.
Check Stock

142pcs Threaded Inserts Repair Kit, Stainless Steel Helicoil Type Wire Insert Installation Set

  • 【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
  • 【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
  • 【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
  • 【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
  • 【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..
Check Stock

Screw Repair Sleeve Assortment Kit Thread Repair Insert Assortment Kit Steel Screw Repair Sleeve 60pcs 304 Stainless Steel Threaded Insert Insert nut Wood Screw Set

  • Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw, and can be used repeatedly.
  • Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock

Toptekits 2 Port USB 3.0 A Female Screw Panel Mount to Motherboard 20 Pin Flat Cable Cord by Toptekits, 1.6ft/0.5m

  • Toptekits Dual Port USB 3.0 Female Screw Mount Panel Type to Motherboard 20 Pin Flat Cable 1.6ft/50cm.
  • Dual Port USB 3.0 Female Screw Mount Panel Type to Motherboard 20 Pin Flat Cable, You can use USB 3.0 type-A female convert USB3.0 (20pin Header) directly connected to the motherboard.
  • USB 3.0 port x 2 switch to USB 3.0 20 pin cable.
  • The usb 3.0 A female connector can screw at the Panel.there are screw Mount holes at USB 3.0 Female end. Length: 50cm/1.6ft.
  • Flat slim Black color cable, Package Included: 1 x 50cm/1.6ft Cable.
Check Stock