Reviews Screw Posts

NeverBreak Parts - Igloo Cooler Replacement Parts - Large White Kit | High Strength Igloo Cooler Hinges Replacement with Latches | Ice Chest Repair Kit

  • DESIGNED TO FIT - Our Igloo cooler hinges and Latches are made to be an exact fit for most rectangular Igloo coolers and ice chests (25 - 165 qt models) hinge replaces Igloo part #24012, latch replaces Igloo part #24013 and included posts replace standard single screw latch posts. See images for exact size and hole spacing measurements. Skimp on other igloo cooler accessories but not on the cooler hardware, save yourself the aggravation and use parts that fit!.
  • MADE TO LAST - Heavy duty material is super strong and flexible and cannot be torn or broken even in extreme hot or cold settings making them the ideal Igloo cooler parts to be used in commercial or marine settings. These igloo cooler replacement parts are a final solution for your broken parts problems..
  • EASY INSTALL - This igloo ice chest repair kit includes all the required posts and stainless steel screws to quickly swap out your broken latches and hinges on standard and marine coolers. Simply remove your old screws and, posts, latches, hinges and discard, screw the new screws into the posts, latches and hinges so they are sticking through the back slightly, line up to holes, screw in and your Igloo coole....
Check Stock

TOAOB 10pcs Screw Earring Backs 18K White Gold Plated Sterling Silver Threaded Screw Earring Backs Hypoallergenic Secure Locking Earring Backs Replacement 6x4.5mm for Studs Post

  • Suitable for threaded posts: Screw earring backs diameter: 6mm/0.24inch, fit 0.033inch/0.85mm post size.
  • It's perfect size to hold it screw on your stud earrings. Note: Only suitable for screw post and backs. Please allow 1-2mm error due to manual measurement.
  • High Quality Material: These earrings backs are plated in 18k white gold to ensure a long lasting finish. It is nickel free, lead free, and hypoallergenic 925 sterling silver earrings back, should not cause skin irritation.
  • Easy to Use:Simply screw the back on the post of your earring until it is sitting securely on your earlobe--Twist front to the right to wear on and turn left to unscrew.That is not only easier to maneuver, it avoids your hair becoming twisted into the back of the earring.
  • Secure Fit:Screw earring backs are used with screw posts.This provides added security compared to push-backs. Screw earring backs can be used for any earring with a threaded post, therefore screw backs tend to be a good option for high value earrings.
  • Safe Design:Screw earring backs is security, convenience and comfort. This special screw design allows you use it on your precious diamond and pearl stud earrings safely,enjoy all the date and party.
Check Stock

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • ...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
  • Install the base plate on a stable concrete slab under the area you wish to support.
  • Use the mounting holes on top and bottom plates to bolt jack to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • ...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor ja....
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • ...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor ja....
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • ...stall and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has an 11,200-pound (5,080 kg) capacity.
  • Max height has a 2,500-pound (1,134 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor....
Check Stock

Pssopp 100Pcs Binding Bars Slide Grip Binding Bars Report Cover A4 Spine Bars with 40 Sheet Capacity A4 Size for School Office Resume Files Supplies(5mm)

  • Charles Leonard 3706L Post Binder Aluminum Screw Posts, 3/16" Diameter, 1" Long, 100/Box.
  • To bind catalog covers, price lists, sample books. Posts are 3/16" dia. with 3/8" heads. Work with most screw post binders..
Check Stock

100 Pcs Fence Wire Clamps for 2-6 Gauge Wire Fencing, Stainless Steel Wire Clips Mount Welded Wire to Vinyl, Wood or Metal Fence

  • ...perior rust resistance and excellent of oxidation resistance, Small and strong, No need worry them rusting and breaking. Keep your pets protected with this durable outdoor fence wire mounting clip.
  • Designed For 2-6 Gauge Wire: The clamps are designed as R-type, There are 2 holes for you to install them at posts with screw. They can be used for 2 to 6 Gauge welded wire fence, perfect for most types of rails and fence posts.
  • Easy to Use: It include 100pcs fence rail clamps in this clamp set, Only need to put the wire into the round hole and fix it with a screw on the wall or the fence after tightening.
  • The fence clip every 2 to 3 feet horizontally and every 2 to 3 feet vertically were distributed, your fence will distribute pressure to fastening points evenly, to increase the strength of fence.
  • Wide Application: You can use this fence mounting clamps install welded wire on vinyl, wood, PVC, steel, composite or other types of fence posts.
  • Also can widely used in warehouse, factory, house or office clamping cable securely in place.
Check Stock

100 Pcs Fence Wire Clamps, Stainless Steel Wire Clips Mount Welded Wire to Vinyl, Wood or Metal Fence (for 12-16 Gauge Wire Fencing)

  • ...rior rust resistance and excellent of oxidation resistance, Small and strong, No need worry them rusting and breaking. Keep your pets protected with this durable outdoor fence wire mounting clip.
  • Designed For 12-16 Gauge Wire: The clamps are designed as R-type, There are 2 holes for you to install them at posts with screw. They can be used for 12 to 16 Gauge welded wire fence, perfect for most types of rails and fence posts.
  • Easy to Use: It include 100pcs fence rail clamps in this clamp set, Only need to put the wire into the round hole and fix it with a screw on the wall or the fence after tightening.
  • The fence clip every 2 to 3 feet horizontally and every 2 to 3 feet vertically were distributed, your fence will distribute pressure to fastening points evenly, to increase the strength of fence.
  • Wide Application: You can use this fence mounting clamps install welded wire on vinyl, wood, PVC, steel, composite or other types of fence posts.
  • Also can widely used in warehouse, factory, house or office clamping cable securely in place.
Check Stock

qfkj Fasteners 20pcs Furniture Glides Leg Bottom Feet Pads Non-Skid Floor Furniture Tacks Nail Protector Buffer Bumper Stop Cushion Hardware Nail

  • Made of carbon steel, which is sturdy and durable, with nickel plated surface, they can enhance the capability of corrosion resistance and decorative effect efficiently..
  • These metal screw posts are widely applicable for leather handicrafts decoration, decorating document, book, photo album, bookbinding, scrap booking and other diy crafts..
Check Stock