Reviews Screw Drill

CTA Tools 9030 Fluted Screw Extractor Set 5-Piece

  • Bolt, Stud or Screw Size: 1/4 to 5/16-Inch and Drill Size: 1/8-Inch.
  • Bolt, Stud or Screw Size: 3/8-Inch and Drill Size: 3/16-Inch.
  • Bolt, Stud or Screw Size: 7/16-Inch and Drill Size: 15/64-Inch and Pipe Size: 1/8-Inch.
  • Bolt, Stud or Screw Size: 1/2 to 9/16-Inch and DrillSize: 5/16-Inch and Pipe Size: 1/4-Inch.
  • Bolt, Stud or Screw Size: 5/8-Inch and Drill Size: 3/8-Inch and Pipe Size: 3/8-Inch.
Check Stock

Broken Screw Extractor set Stripped screw remover Easy out bolt extractor set Left hand drill bits 11PCS Screw remover and extractor Grabit pro screw extractor

  • 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws..
  • USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is back....
Check Stock

Damaged Screw Extractor Set for Broken Rusty Screw, Cool Gadgets Gifts for Men and Women, A HassleFree Broken Bolt Extractor and Screw Remover Set HSS M35 (70 HRC)

  • Extra Strong, Reliable and Durable M35 HSS High-Speed Steel – The stripped screw extractor is manufactured from High Speed Steel (HSS) M35 with a 70 HRC hardness(Far Better than 6542, 4341 Material), which effectively removes broken screws from any surface..
  • Solve Any Broken Screws – This Damaged Screw Extractor Set works with any drill on any screw or bolt.With our dynamic set of extractor drill bits, removing stripped, painted over, rusted or rounded screws & bolts has never been easier or more efficient !.
  • Easy to Use - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next use the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • Gifts for Men and Women, Holiday Gift Guide - This Damaged Screw Extractor makes an amazing gift for any occasion. A must-have stocking stuffer ....
Check Stock

Todays Tools scrwgrb001 Screwdriver Grip

  • 6-PIECE STRIPPED SCREW EXTRACTOR SET – this kit includes a screw extractor bit to remove all common sizes of damaged, stripped, or broken screws. BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • MODERN TOOL – typically called an easy out or “EZ out”, this black nitrided screw remover and extractor kit improves upon the traditional design with a total of 5 bit sizes..
  • EASY TO USE – PLEASE WATCH THE PRODUCT VIDEO FOR FULL INSTRUCTIONS. Set your drill to reverse/counterclockwise and use a slow drill speed. Begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole. Switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw..
  • MUST-HAVE TOOL – whether you are a handyman, handywoman or contractor, screws sometime get damaged or broken. Keep this set in your toolbox to get the damaged screw out and your project back on track..
Check Stock

LEIGH Box Joint & Beehive Router Jig, Model B975

  • ...can be held by one hand, designed for portable or desktop installation, very suitable for DIY household projects or professional and general commercial use. DIY craftsmen use this fixture kit to build their own woodworking projects.
  • Simple and easy to use: Use a jig to drill an inclined counterbore in a joint. Then, screw the self-tapping screw (without pilot hole) into another part, and easily and quickly drill the inclined hole to hide the screw in the wooden furniture to form a precise woodworking hole to create or repair the wood joint.
  • 15 drill angle, 2-way tilt, to ensure accurate screw connection, and then embed the screw to prevent the screw from hiding. Allows you to easily hide screws/fasteners. The 10mm drill bit adapter can be easily replaced according to different sizes of wood types, positions and angles. Sharp drills with excellent performance, work smoothly and efficiently without burrs.
  • Complete pocket hole fixture system-fixture kit includes::1* pocket hole jig with clamp1* Step Drill Bit (replaceable)1* screwdriver (replaceable)1*steel stop collar1* square drive bit2* drivepipe1* Hex wrench 1* 6 in square drive bit20 coarse square drive screws20 fine square drive screws.
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

Stripped Screw Remover Set - 6 Pieces - Black Nitride

  • 6-PIECE STRIPPED SCREW EXTRACTOR SET – this kit includes a screw extractor bit to remove all common sizes of damaged, stripped, or broken screws. BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • MODERN TOOL – typically called an easy out or “EZ out”, this black nitrided screw remover and extractor kit improves upon the traditional design with a total of 5 bit sizes..
  • EASY TO USE – PLEASE WATCH THE PRODUCT VIDEO FOR FULL INSTRUCTIONS. Set your drill to reverse/counterclockwise and use a slow drill speed. Begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole. Switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw..
  • MUST-HAVE TOOL – whether you are a handyman, handywoman or contractor, screws sometime get damaged or broken. Keep this set in your toolbox to get the damaged screw out and your project back on track..
Check Stock

Pocket Hole Jig Kit Dowel Drill Joinery Screw Kit Carpenters Wood Woodwork Guides Joint Angle Tool Carpentry Locator

  • ...can be held by one hand, designed for portable or desktop installation, very suitable for DIY household projects or professional and general commercial use. DIY craftsmen use this fixture kit to build their own woodworking projects.
  • Simple and easy to use: Use a jig to drill an inclined counterbore in a joint. Then, screw the self-tapping screw (without pilot hole) into another part, and easily and quickly drill the inclined hole to hide the screw in the wooden furniture to form a precise woodworking hole to create or repair the wood joint.
  • 15° drill angle, 2-way tilt, to ensure accurate screw connection, and then embed the screw to prevent the screw from hiding. Allows you to easily hide screws/fasteners. The 10mm drill bit adapter can be easily replaced according to different sizes of wood types, positions and angles. Sharp drills with excellent performance, work smoothly and efficiently without burrs.
  • Complete pocket hole fixture system-fixture kit includes::1* pocket hole jig with clamp 1* Step Drill Bit (replaceable)1* screwdriver (replaceable)1*steel stop collar 1* square drive bit 2* drivepipe 1* Hex wrench 1* 6 in square drive bit 20 coarse square drive screws 20 fine square drive screws （It is recommended to match electric drill with power o....
Check Stock

COMOWARE 20V Cordless Drill, Electric Power Drill Set with 2 Batteries & Charger, 3/8” Keyless Chuck, 2 Variable Speed, 280 In-lb Torque, 18 Position and 22pcs Drill/Driver Bits

  • 【20 Voltage & 2 Variable Speeds】Higher voltage means more torque-spinning strength to overcome resistance. 2 variable-speed ( 0-350 & 0-1350 RPM) power drill with an adjustable clutch gives you versatility for drilling different materials and using a variety of bits. The low speed is for driving screws, the high speed for drilling holes..
  • 【18+1 Position Clutch & 280 In-lb Max Torque】 The drill's clutch gives a user more control over the amount of torque applied to a screw to prevent sinking a screw too deep, stripping out the head of a screw or even breaking a screw shaft. 18 Torque allows for various tasks and additional 1 torque for drilling..
  • 【2 x 1500mAh Batteries & 60min Fast Charger】20V 1500mAh Lithium-Ion battery packed with higher capacity indicator let you finish your job smoothly with long lasting performance. 1.5A 1-hour fast charger keeps your drill constantly running..
  • 【3/8” Keyless Metal Chuck & LED Work Light】A 3/8-inch cordless drill accepts a wide range of bits, making it versatile for common tasks around the house. Drill has keyless chuck that you can tighten or loosen by hand. The Forward/Reverse switch allows you to either screw or replace/remove bits on your purposes. LED Light for increased visibility in enclosed ....
Check Stock

AUTOTOOLHOME 10pc Drywall Screw Bits Setter Dimpler PH2 Magnetic Bit Holder for Plasterboard

  • 1/4inch Magnetic hex shank drill bit Holder & Drywall Dimpler Set..
  • The holder accepts any 1/4" hex shank bits, and is useable in both impact drivers and standard drills.Matching with any power drill and cordless drill for normal usage..
  • Drywall screw setter for driving and countersinking screws into drywall particle board ,plasterboard and plywood.
  • Included 10pcs #2 Phillips bit drywall screw setters and 1pcs 2-3/8inch Length quick change drill bit holder.
  • The strong magnet will not only hold the bit tip securely, but will also grab the screw tight enough for one-handed operation，This screwdriving accessory is used to control the depth of a screw during driving applications..
Check Stock