Reviews Scope Mount Included

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Long Action | 0 MOA

  • Picatinny rail mount built specifically for Long Action Remington 700 rifle platforms.
  • Compatible with Long Action Remington 700 models only including: 270 Winchester | 300 Win Mag | 30-06 Springfield | 25-06 Remington | 338 Lapua.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Dual Ring Scope Mount Compatible with Ruger 10/22 | 1 Inch Diameter

  • Dedicated dual ring scope mount compatible with the Ruger 10/22 platform.
  • Scope mount installs directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required. The mount will not install on platforms other than the Ruger 10/22..
  • 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Short Action | 0 MOA

  • Picatinny rail mount built specifically for Short Action Remington 700 rifle platforms.
  • Compatible with Short Action Remington 700 models only including: 223 Remington | 243 Winchester | 308 Winchester | 6.5 Creedmoor | 7 mm Remington Mag | 7 mm-08 Remington | 257 Weatherby Mag | 270 WSM | 22-250 Remington |300 Remington Ultra Mag | 300 AAC Blackout | 220 Swift.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount Compatible with Stoeger M3000/M3500 / Benelli SBE/M1/M2 / Franchi Affinity 3/3.5 / Remington 7400/7600 / Weaver 93 | 0 MOA

  • Picatinny rail mount compatible with the following firearm platforms: Remington 7400/7600 | Benelli Black Eagle I/II/M1/M2/Auto/Vinci | Franchi Affinity 3/3.5 | Stoeger M3000/M3500.
  • Package includes both #6 standard screws and .335” OAL screws to match different receiver hole patterns.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum 3-9x40 Rifle Scope with AO Adjustable Objective | Ruger 10/22 Edition with Ruger 10/22 Dual Ring Scope Mount

  • End-to-end rifle scope solution built exclusively for the Ruger 10/22 platform.
  • Adjustable 3-9 times magnification, for targeting out to 500 yards and beyond.
  • An adjustable objective lens or AO - that allows for sharper focus of the target image, elimination of parallax, and range estimation.
  • Scope mount installs directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Precision scope mount machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount....
Check Stock

Sks, Aks, Ak-47 Owner's Manual

  • 【Light-weight & Metal Side Rail Mount】：RTMGOB side rail mount, made of premium aluminum alloy, CNC-machined, finished and anodized, solid and durable to mount on 47 model.
  • 【Quick Detach Side Scope Mount】:The side scope mount can be quick detached from side plate receiver. Desiged with a quick-detach lever and spring-loaded adjustment part. Press on the lever button lower part for quick unlocking the mount while move the lever to another side. Then press the spring-loaded part and roll out the screw to detach the scope mount, no tools needed.
  • 【Side Picatinny Rail Mount】: The side mounted rail is standard picatinny rail for mounting red dot, sights, optic scope, flashlight, and other tactical optic accessories. The side rail mount has 17 rail slots and 8 drilled holes, covenient for mounting red dot scope, and allows sight cowitness.
  • 【Easy-to-mount Side Mount】: The scope mount can be easily mounted on 47 model. Before mounting, pull the lever upward, slide onto the side plate, tighten the scope mount by pressing the spring-loaded part and rotating the screw to adjust tightness, and finally push the lever to the right to lock the mount. The mount once settled stably and tightly, would not slipping off and shaking.
Check Stock

Monstrum One Piece Scope Mount for Marlin 336/1894/1895 Series Lever Action Rifles | Low Profile | 1 Inch Diameter

  • Dedicated scope mounting platform built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Rings are 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Scope mount base installs directly to the Marlin factory mounting holes via the included set screws with no additional mounting hardware required.
  • Note that the low profile design may not accommodate scopes with large objective bells and that installation may require removal of your rear sight. Please measure scope mount dimensions against your scope before purchasing..
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

360 Tactical 3-9X40 1

  • Only Scope And Mount , Carry Handle Not Included In The Package.
  • Range Estimating Mil-dot Reticle for Optimal Aiming and Shooting Performance, Adjustable Objective from 3 Yards to Infinity.
  • Red/Green Dual Illumination for Versatile Applications, Large Field of View and Most Accommodating Eye Relief for Optimum Critical CQB Mission.
  • Front and Rear Flip Lens Covers, Rubber casing over aluminium body construction handle bumps easily.
  • Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fog proof and Rainproof.
Check Stock

Souyos Red Hunting Flashlight,350 Yard Zoomable Predator Varmint Coyote Hog Hunting Light,Red Led Light Flashlight with Scope Mount,Pressure Switch

  • RED LED FLASHLIGHT:Single mode with 350 yard tactical red led flashlight,XML-T6 LED bulb,not red filter flashlight or red lens flashlight,4 hours working time,suitable for hunting predator,varmint,coyote,fox,hog,fishing,night version,night observation,astronomy.
  • ZOOMABLE RED HUNTING FLASHLIGHT:Zoom in&zoom out status can be adjusted based on your needs for large area &long distance,the regular status is floodlight, stretching flashlight can make light became spotlight,adjustable focus help you find prey,aim and observation target clearly and security without disturbing them.
  • REMOTE PRESSURE SWITCH&SCOPE MOUNT:Momentary on pressure switch and On/Off push button switch, Push the pressure switch or press the on/off button switch to transfer on/off status,Standard 20mm Weaver Picatinny Rail Mount, Medium Profile Rifle scope rings to fit 1 inch / 25mm scope body / tube diameter.
  • POWER SOURCE:Operated by 3*AAA batteries(included) or 1*18650 battery(not included),18650 battery operates red light is brighter than 3 AAA batteries.
  • 10.FLASHLIGHT KIT:1*carrying package box,1*red light flashlight,3*AAA batteries,1*remote pressure switch,1*scope mount.1*AAA battery holder,1*18650 battery tube.
Check Stock

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles with Integrated Level Bubble | 0 MOA

  • Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock