Reviews Scope For 34

Monstrum Rifle Scope Level Bubble | 1 inch Diameter

  • The Monstrum Rifle Scope Level Bubble is a tool built to check for proper vertical alignment of your rifle.
  • Imperfect vertical alignment of your scope when shooting introduces scope cant error - horizontal drift of your shots due to cant - An anti-cant level bubble corrects for this issue, allowing you to quickly check for proper alignment of your rifle before each shot..
  • The level bubble attaches to your rifle scope via the integrated ring mount.
  • Available in 1 inch, 30 mm, and 34 mm diameter versions.
  • All Monstrum optics and accessory products come with a lifetime guarantee.
Check Stock

The Complete Guide to Gunsmithing: Gun Care and Repair

  • The Monstrum Rifle Scope Level Bubble is a tool built to check for proper vertical alignment of your rifle.
  • Imperfect vertical alignment of your scope when shooting introduces scope cant error - horizontal drift of your shots due to cant - An anti-cant level bubble corrects for this issue, allowing you to quickly check for proper alignment of your rifle before each shot..
  • The level bubble attaches to your rifle scope via the integrated ring mount.
  • Available in 1 inch, 30 mm, and 34 mm diameter versions.
  • All Monstrum optics and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings | 34 mm Diameter | 1.40 inch Height

  • 1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 34 mm diameter rings for mounting standard 34 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings | 34 mm Diameter | 1.00 inch Height

  • 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 34 mm diameter rings for mounting standard 34 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Wheeler Scope Ring Alignment and Lapping Kit, 34mm for Scope Mounting, Accuracy, Gunsmithing

  • FUNCTION: Lapping the inside scope rings will reduce or eliminate any shifting of the scope inside the rings.
  • RELIABLE: Alignment bars provide the perfect alignment of both rings and will also diagnose any vertical or horizontal misalignments.
  • CONVENIENT: Lapping handle attaches to bars for easier use.
  • INCLUDES: 220 grit lapping compound, alignment bar, lapping bar.
Check Stock

Monstrum Offset Cantilever Picatinny Scope Rings | 1 inch Diameter | Flat Dark Earth

  • The WH212 scope rings position the center of the scope tube at a height of 36 mm from the base, fits 1 inch, 30 mm and 34 mm tube optics.
  • Fits 20mm Picatinny rails and Weaver rails, net weight 153g(5.4oz).
  • Precision CNC machined from 6061 T6 aircraft-grade aluminum and finished in a colorful anodizing for unique appearance, passed rigorous accuracy and stability tests.
  • Disadvantage and Warranty: Due to the different lighting environments, there are slight differences between real objects and pictures. We provide a lifetime warranty for this product.
Check Stock

Nightforce Optics X-Treme Duty Ultralite Compact Magmount Scope Mounting System, 1.5in, 34mm Rings, 20 MOA Taper, Black, A362

  • XTRM DUTY COMPACT MAGMOUNT - Nightforce Compact Magmount is a tough, reliable mounting system that doesn't add substantial weight. It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns.
  • UNIQUE DESIGN - This scope mount features a CNC machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws. This unique design and construction provides the performance of steel at half the weight.
  • PRECISE TOLERANCES - Precise tolerances ensure that the scope is not subjected to stress, strain, or bending as the ring screws are tightened.
  • SPECIFICATIONS - This X-Treme Duty Ultralight Compact Magmount scope mounting system is 1.5" high, fits 34mm scope tubes, and features a 20 MOA taper.
  • NOTE - Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb.
Check Stock

CVLIFE 2.5-10x40e Red & Green Illuminated Rifle Scope Mil-dot Gun Scope Green Laser Combo with Pressure Switch

  • The rifle scope can provide high-definition aiming at 2.5-10 times magnification . Objective Diameter: 40mm，Field Of View: 34.5'- 11.5' @2.5x-10x @100yard，Click Value: 1/4 inch @ 100 yards.fogproof and waterproof since filled with nitrogen..
  • Illuminated Type of the gun scope: 5 Intensity (Red) and 5 Intensity (Green) It can be changed quickly and easily according to the brightness needs of different scenarios.Reticle etched on the glass of the scope provides excellent backing support for complex reticle design and offers great durability and accuracy..
  • Three parts with mutil-functions ： Black reticle With Illuminated reticle and red laser, Laser: 2mW, Class IIIA is good for observe about 200-500m for the distance. Shockproof. Fast Focus Eyepieces： +-2 diopter adjustment, that can use by people with different eyesight..
  • Additional configuration pressure switch（Rat Tail switch）：Have 2 Types of Switches - Comes with a constant on button switch and a momentary on pressure switch (2 modes) for different need. users will enjoy the dual-switch tail cap which allows for easy single-handed operation. Press the tail but....
Check Stock

Nightforce Optics X-Treme Duty MagMount Scope Mount, 1.44in, 34mm Rings, 0 MOA Taper, 3 Jaw/Nut, for Guns with Canted Rails, Black, A162

  • X-TREME DUTY MAGMOUNT – Nightforce Ultralite MagMount is a tough, reliable mounting system that doesn’t add substantial weight. It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns.
  • UNIQUE DESIGN – This scope mount features a CNC machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws. This unique design and construction provides the performance of steel at half the weight.
  • PRECISE TOLERANCES – Precise tolerances ensure that the scope is not subjected to stress, strain, or bending as the ring screws are tightened.
  • SPECIFICATIONS – This X-Treme Duty Ultralight MagMount scope ringmount is 1.44″ high, fits 34mm scope tubes, features a Zero degree MOA taper and three-jaw clamping system.
  • NOTE – Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb.
Check Stock

PROXXON Model Building and Engraving Set 38515 Green

  • Complete set with rotary tool MICROMOT 60/E, mains adapter and 34 bits and cutters.
  • The right choice for creative hobbyists and model makers.
  • With 6 high precision triple slit steel collets.
  • Accurate clamping of the bits for highest concentricity and the precision you need for finest work pieces.
  • Scope of delivery: 1x PROXXON Model Building and Engraving Set including rotary tool MICROMOT 60/E, mains adapter, 34 bits and cutters and 6 high....
Check Stock