Reviews Saws To Cut Wood

CMT 252.072.12 ITK XTreme Industrial Fine Cut-Off Saw Blade, 12-Inch x 80 Teeth ATB Grind with 1-Inch Bore

  • For fast extra-clean crosscuts and occasional rip as well on wood and plywood..
  • To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
  • 0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/20° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

CMT 250.024.10 ITK XTreme Industrial Rip Saw Blade, 10-Inch x 24 Teeth ATB Grind with 5/8-Inch Bore

  • For fast rip cuts on soft/hardwood thanks to the thin kerf design..
  • To be used on radial arm saws, miter saws, table saws for cutting soft/hardwood. Good on plywood..
  • 0.098 kerf thickness, 0.071 plate thickness, 20° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

CMT 255.096.12 ITK Industrial Fine Finish Saw Blade, 12-Inch x 96 Teeth 40° ATB Grind with 1-Inch Bore

  • For fine finish crosscuts. Glass-smooth finish on your miter cuts..
  • Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws..
  • 0.110 kerf thickness, 0.087 plate thickness, 5° Hook Angle, 40° Alternate Teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

CMT 255.080.10 ITK Industrial Fine Finish Saw Blade, 10-Inch x 80 Teeth 40° ATB Grind with 5/8-Inch Bore

  • For fine finish crosscuts. Glass-smooth finish on your miter cuts..
  • Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws..
  • 0.098 kerf thickness, 0.071 plate thickness, 5° Hook Angle, 40° Alternate Teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

Whirlwind USA MGSB 7 1/4 Inch 60 Teeth Circular Saw Blade for Wood,Carbide Cordless Miter/Table Saw Blade,7/8-5/8 Arbor

  • High quality and professional grade for ripping and crosscu tting of thick hardwood to 3-1/2" thick and softwood to 1" thick..
  • The blades can be used on Circular Saws, Table Saws, Miter Saws, Hand Saws and Chop Saws..
  • Ideal for cutting hardwood, softwood, exotic wood and abrasive wood..
  • Thin kerf allwos a smooth finish with minimum waste. Lower hood angle improves the surface quality of the cut and increases the feed pressure..
Check Stock

CMT 256.050.10 ITK XTreme Industrial Combination Saw Blade, 10-Inch x 50 Teeth 4 ATB + 1 FLAT Grind with 5/8-Inch Bore

  • For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance..
  • Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws..
  • 0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 4/20° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

SUIZAN Japanese Flush Cut Saw Small Hand Saw 5 Inch Pull Saw for Hardwood and Softwood Woodworking tools Trim Saw

  • JAPANESE STYLE PULL SAW: This flush cut saw is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese hand saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
  • JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
  • MADE IN JAPAN: All SUIZAN woodworking tools are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
  • BLADE FOR HARDWOOD AND SOFTWOOD: With this small hand saw, you can easily cut oak, sandalwood, ebony, mahogany, maple, walnut and pine with a robust blade for hardwood. The blade for softwood can be used for white cedar, Japanese cedar, larch, paulownia wood and many others..
  • DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your ....
Check Stock

Weaver Curved Saw Scabbard 27 With Snap Hook, Black

  • JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
  • UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
  • RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
  • RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
  • PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.
Check Stock

GreatNeck 74003 15 Inch Aggressive Tooth Handsaw, Aluminum Frame, Wood Saw, Branch Cutter, PVC Cutter, Tree Saw, Handsaw for Wood, Hand Saw for Trees

  • CUTS QUICK: Wood cutting saws feature 9 teeth per inch/10 points per inch for delivering a rough cut.
  • Tri-bevel tooth design for faster, more efficient wood cutting.
  • Wood features deep gullets for fast and efficient wood chip removal.
  • DURABLE WOODWORKING SAW: Induction hardened 1MM SK-5 steel saw blade to ensure durability and rust resistance.
  • This is a long-lasting tree saw from a company known for producing high quality hand saws for trees.
  • COMFORTABLE TO USE: Small wood saw features a composite anti-slip comfort handle for reduced hand fatigue.
  • Plywood hand saw has Great Guard coated blade to reduce friction.
  • Fast and comfortable hand saw for woodworking.
  • EASY TO USE: Our handsaw for wood features built-in 45° and 90° angle markings for guided cutting as well as a 12 inch ruler on the back of the manual saw for measuring and accurate cuts.
  • Make quick, precise cuts with this handsaw for trees.
  • WIDELY USEFUL SAW: Our hand saws for cutting wood also tackle a variety of other cutting tasks.
  • Use it for gardening, cutting tree branches, even cutting PVC pipe.
  • Cuts fasters than other saws, stays sharp, and stands up to all sorts of cutting tasks.
Check Stock

GreatNeck 74004 20 Inch Aggressive Tooth Handsaw, Aluminum Frame, Wood Saw, Branch Cutter, PVC Cutter, Tree Saw, Handsaw for Wood, Hand Saw for Trees

  • CUTS QUICK: Wood cutting saws feature 11 teeth per inch/12 points per inch for delivering a rough cut.
  • Tri-bevel tooth design for faster, more efficient wood cutting.
  • Wood features deep gullets for fast and efficient wood chip removal.
  • DURABLE WOODWORKING SAW: Induction hardened 1MM SK-5 steel saw blade to ensure durability and rust resistance.
  • This is a long-lasting tree saw from a company known for producing high quality hand saws for trees.
  • COMFORTABLE TO USE: Small wood saw features a composite anti-slip comfort handle for reduced hand fatigue.
  • Plywood hand saw has Great Guard coated blade to reduce friction.
  • Fast and comfortable hand saw for woodworking.
  • EASY TO USE: Our handsaw for wood features built-in 45° and 90° angle markings for guided cutting as well as a 17 inch ruler on the back of the manual saw for measuring and accurate cuts.
  • Make quick, precise cuts with this handsaw for trees.
  • WIDELY USEFUL SAW: Our hand saws for cutting wood also tackle a variety of other cutting tasks.
  • Use it for gardening, cutting tree branches, even cutting PVC pipe.
  • Cuts fasters than other saws, stays sharp, and stands up to all sorts of cutting tasks.
Check Stock