Reviews Sata Port

Qphone12 SATA PCI-E Adapter 10 Ports PCI Express X4 to SATA 3.0 6Gbps Interface Rate Expansion Card Controller for HDD ASM1166

  • [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s.
  • [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported.
  • [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
  • [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot.
  • [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.
Check Stock

Padarsey 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD

  • 【SATA III 1 to 5】SATA3.0 1 to 5 expansion card supports 6-port 6.0Gbps SATA III interface. This expansion card requires the motherboard or expansion card support point (SATA Interface Multiplier) to recognize 5 hard drives. Normal motherboard SATA does not support this function. If not, only one hard disk can be recognized..
  • 【High Performance】SATA III PHY output swing control and automatic impedance calibration. Plug in the SATA or DC2.5 power cord to charge the expansion card. Plug the SATA input cable into the motherboard or expansion card to charge the SATA..
  • 【Meet The Specification】The SATA3.0 expansion card complies with the Serial ATA Port Multiplier specification, the serial ATA port selector specification, the ATA PHY series electrical specification revision 1.0, and the accessory specification ATA series high-speed serialization..
  • 【Support Function】SATA3.0 card supports spread spectrum clock, asynchronous signal recovery, partial/sleep power saving mode, BIST and Loopback mode, interleaved rotation (optional), supports hot swap, asynchronous notification, ATAP driver, SWIT based on order and Fi..
  • 【100% Guarantee】If you have any questions about our products while using them, please feel free to contact our 24/7 customer servic....
Check Stock

zdyCGTime 2.5' Hard Disk Drive SATA 22Pin to eSATA Data USB Powered Cable Adapter

  • The eSATA to SATA cable allows you connect power over eSATA port supports 5V/12V to SATA 22 Pin HDD..
  • Sata to eSATA cable Supports with 2.5",3.5" SATA HDD and 5.25" Blueray Play, DVD Play and CD Rom with data transfer and power for 5V and 12V..
  • It provides data transfer and power simultaneously to connect SATA drives with eSATA+USB equipped systems..
  • Simplifies eSATA data and power connection, Better solution for eSATA drive enclosures with USB power.
  • Please make sure that your PC port is Comb Power Esata Port.
Check Stock

COMeap (3-Pack) Motherboard ATX 4 Pin to SATA Hard Drive HDD Power Adapter Cable for Lenovo 12-inch(30cm)

  • 『4P - SATA』4 Pin port plugs into Lenovo motherboard (NOTE: It is standard 4 pin port, not mini 4 pin port.), SATA port plugs into the hard drive.
  • 『Connectors』Connector A: ATX 12V 4 pin(NOTE: not mini 4 pin. Please refer to the image 3rd for 4 pin port's dimension), Connector B: SATA (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd).
  • 『Compatibility』Compatible with Lenovo motherboard with standard 4 pin port including: Q77 Q75 E450 E350 D510 (NOTE: It only works with standard 4 pin port, not mini 4 pin port.).
  • 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 12 inches(30cm), Quantity: 3 pieces, Self-adhesive tape*1pcs.
  • 『Note』This cable was only designed for Lenovo motherboard with standard 4 pin port as listed. If you use other incompatible brand motherboards or types, it will definitely burn or damage the motherboard or hard driver and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contac....
Check Stock

RackSolutions Wall Mount for Dell OptiPlex 3040 and Inspiron 3252 SFF PCs with VESA Mouting

  • Mini 6 Pin to SATA: Mini 6 Pin port plugs into the motherboard (NOTE: It is mini 6 pin port, not standard 6 pin port.), SATA port plugs into the hard drive.
  • Connectors: Connector A: ATX 12V mini 6 pin, Connector B: SATA Port (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd).
  • Compatibility:Compatible with DELL Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668 3670 V3668.
  • ( Note: Do Not support the DELL OptiPlex series such as 3020 3046 5040 7020 7040 9020 SFF T1700.
  • Quality: 18AWG with braided sleeves, Length(including connectors): 15 inches(38cm).
  • 『Note』This cable was only designed for some types of DELL Inspiron series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
Check Stock

Cable Matters 2-Pack 6 Gbps SATA III to eSATA Cable 3 Feet

  • Internal to external connectivity changeover SATA cable is specifically designed to connect existing motherboards with SATA port to an external hard drive, enclosure or docking station with eSATA.
  • Convenient alternative to using a USB port on your computer.
  • Blazing fast SATA III speeds up to 6 Gbps are faster than USB 3.0 equipped drives and much faster than a USB 2.0 to HDD adapter.
  • Upgrade to an eSATA enabled TB hard drive for direct file back-up instead of using a network.
  • Provides secure connections for fast and reliable file transfers.
  • Backwards compatible with SATA I, II, III hard drives.
  • Fully shielded & flexible eSATA to SATA cable is engineered to reduce EMI noise interference.
  • Latching SATA connector attaches securely for a trouble-free installation.
  • Flexible cable jacket allows installation in tight computer cases.
  • SATA and eSATA connectors are keyed differently to avoid connecting incorrectly.
  • Cost-effective 2-pack provides spare or superior replacement SATA to ESATA cable cable to fix troublesome connection problems.
  • Longer cable length allows location of an external hard drive in a convenient location.
  • Low cost way to add eSATA when you have a free internal SATA port or to repurpose older SATA internal hard drives..
Check Stock

Asus Micro ATX DDR3 1066 LGA 1150 Motherboards H81M-K

  • Compatible Processors: Pentium, Celeron, Core i5, Core i3, Core i7.
  • Memory: 2x DDR3-1600/ 1333/ 1066 DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 16GB.
  • Slots: 1x PCI-Express x16 Slot, 2x PCI-Express 2.0 x1 Slots.
  • Ports: 2x USB 3.0 Ports, 6x USB 2.0 Ports (2 rear, 4 at mid-board), 1x PS/2 Keyboard Port, 1x PS/2 Mouse Port,1x VGA Port, 1x DVI Port, 1x RJ45 LAN Port, Audio I/O Jacks.
Check Stock

COMeap HDD SATA Power Cable Replacement SATA 15 Pin to Mini 6 Pin ATX Adapter for Dell Inspiron 3653 3650 Series Compatible Part No. GP2JM 15-inch(38cm) (Pack of 2)

  • ( Note: Do not support the DELL OptiPlex series such as 3020 3046 5040 7020 7040 9020 SFF T1700.
  • ( Please purchase the mini 8 pin to SATA adapter for DELL OptiPlex series, the link is https://www.amazon.com/dp/B07Z2GBR25 ).).
  • 『Connectors』Connector A: ATX 12V mini 6 pin (NOTE: It is mini 6 pin port, not standard 6 pin port.), Connector B: SATA 15 pin (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd).
  • 『Mini 6P – SATA』Mini 6 Pin port plugs into the motherboard(NOTE: It is mini 6 pin port, not standard 6 pin port.),15 Pin SATA port plugs into the hard drive.
  • 『Compatibility』Compatible with DELL Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668 3670 V3668.
  • 『Note』This cable was only designed for some types of DELL Inspiron series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
  • 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 15 inches(38cm), Self-adhesive tape*1pcs.
Check Stock

ASRock ATX DDR3 1333 LGA 1150 Motherboards FATAL1TY Z97 Killer

  • Supports the 5th/ New 4th/ 4th Generation Intel Core i7/i5/i3/ Pentium/ Celeron Processors.
  • Memory: 4x DDR3-3000+(OC)/ 2933(OC)/ 2800(OC)/ 2400(OC)/ 2133(OC)/ 1866(OC)/ 1600/ 1333/ 1066 DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 32GB.
  • Slots: 1x PCI-Express 3.0 x16 Slot, 1x PCI-Express 2.0 x16 Slot (runs at x4), 2x PCI-Express 2.0 x1 Slots, 2x PCI Slots.
  • SATA: 6x SATA3 Ports, Support RAID 0, 1, 5, 10.
  • Ports: 6x USB 3.0 Ports (4 rear, 2 via headers), 6x USB 2.0 Ports (3 rear, 2 via headers, 1 Fatal1ty Mouse Port), 1x PS/2 Mouse/Keyboard Combo Port, 1x VGA Port, 1x DVI-D Port, 1x HDMI Port, 1x Optical S/PDIF Out, 1x RJ45 LAN Port, Audio I/O Jacks.
Check Stock

COMeap Motherboard ATX Mini 8 Pin to 2X Right-Angle 15 Pin SATA Hard Drive HDD Power Adapter Cable for Dell OptiPlex Series 3020 5040 7020 9020 14.5-inch(37cm)

  • 『Connectors』Connector A: ATX 12V mini 8 pin (NOTE: not standard 8 pin), Connector B: 2x Right-angle SATA 15 pin (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and a ssd).
  • 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 14.5 inches(37cm)，Between 2 SATA: 2.36 inches(6cm).
  • 『Note』This cable was only designed for some types of DELL OptiPlex series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
  • 『Compatibility』Compatible with DELL OptiPlex series such as 3020/3040/5040/7020/7040/9020 MT, T1700MT.
  • 『Mini 8P – 2x Right-Angle SATA』Mini 8 Pin port plugs into the motherboard (NOTE: It is mini 8 pin port, not standard 8 pin port.), 15 Pin SATA port plugs into the hard drive.
Check Stock