Reviews Sata Jet B

ANYOYO M.2 to USB Adapter USB 3.1 Gen 2 Bridge Chip 10 Gbps Converter Reader for M.2 NVME&SATA SSD Based M Key and B+M Key Support 2230 2242 2260 2280 22110 Size SSD

  • [High Performance] - M.2 NVMe / SATA to USB adapter based on 10Gbps USB3.1 Gen 2 bridge chip（RTL9210B）, can retrieve and backup data in high....
  • [M.2 NVMe/SATA SSD] - Support for M.2 NVMe/SATA SSD Based on M & B+M KEY.NOT support SATA based B Key SSD. Applicable to sizes 2230 2242 2260 2280....
  • [Hot Swap] - The M.2 to USB adapter without enclosure cover, can help fast heat dissipation with a thermal pad..
  • [Plug and play] - Plug and play, can realize full potential of high performance..
  • [Please Note] - PLS CHECK TO MAKE SURE YOUR DRIVE IS M.2 SSD. DO NOT support any B Key or B+M Key SSD based sata data transfer protocol or non-M.2....
Check Stock

M.2 to USB Adapter RIITOP NVMe to USB 3.1 Reader Card Compatible with Both NVMe PCI-e M Key SSD & B+M Key SATA Based NGFF SSD

  • M.2 to USB Adapter, RIITOP M2 SSD to USB 3.1 Card Reader Compatible with Both NVMe (PCI-e Channel) & B+M Key (SATA Channel) SSD，allows adding NVMe....
  • Chipset and Speed - RIITOP NVMe to USB Adapter Adopts Realtek 9210B Master chip, USB3.1 GEN2 transmission. It will be reduced to USB 3.0 Speed if....
  • Compatible with M.2 SSDs ( Both NVMe and B+M key SATA): 80x22mm, 60x22mm and 42x22mm. Compatible with M.2 SSDs (NVMe and B+M Key SATA): 80x22mm,....
  • Note: This M.2 NVMe SSD to USB Adapter adopts M key Socket, but can support both M.2 PCI-e Based M Key Nvme SSD, and SATA based B+M key or B Key SSD.
  • Package including: 1x M2 to USB Adapter, 1x silicone pad, 1x screwdriver.
Check Stock

ZEXMTE M.2 NGFF or mSATA to SATA III Adapter, 2-in-1 M.2 to USB Adapter, NGFF or mSATA USB 3.0 Adapter Converter as Portable 2.5'' SATA Hard Drive, mSATA to SATA Enclosure(USB SATA Adapter Included)

  • ✅【Exclusively Combination Design】2 in 1 Combo M.2 SATA or mSATA to USB Adapter enclosure. Easily convert NGFF SATA Key B / B+M or mSATA SSD to an external 7+15 pin solid state drive card, adding extra storage space for your laptop and desktop..
  • ✅【Support M.2/mSATA SSD】One SSD can be identified at a time. Toggle switch model design, you could easily adjust the SSD's switch to the NGFF model or mSATA model. Fit for M.2 SATA B-key or B+M-key SSD(2230 2242 2260 2280) and full/half size mSATA SSD(30mmx50mm 30mmx30mm). Pls, check your M.2 SSD type before placing an order..
  • ✅【Plug and Play】M.2 adapter support hot plug. No driver need. Always eject the hard drive safely before unplugging the adapter from your computer in case of data loss. Compatible with Windows XP/Vista/7/8/10 & Mac OS..
  • ✅【High Speed】M.2 SATA to USB 3.0 cable, easily connects a 2.5 hard drive to a laptop. Transmission speed rate up to 6Gbps. Note: 6GBPS is the theoretical transfer speed, the actual transfer speed depends on the SSD and the performance of the computer interface..
  • ✅【 M.2 to SATA Adapter】The USB SATA adapter allows you to connect a 2.5" SATA SSD to your computer to expand storage, upgrade the system, back up files, retrieve and recover data, and tran....
Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

  • ...ity certified DC 5V 4A power supply(ASIN :B07413Q5Y4).Power supply request: 5Vdc +/-5% , 4A.
  • The power adapter not only powers Raspberry Pi board but also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
  • ✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
  • For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
  • ✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
  • User manual, pls refer to Geekworm WiKi search(X820)..
  • ✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
  • Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices, such as smartphone, tablet......
Check Stock

DiLinKer OCuLink SFF-8611 to PCIE SFF-8639 U.2 NVMe with Power Cable 1M

  • Create high-performance storage with configurable RAID by installing two M.2 SATA SSDs into a 2.5 SATA interface.
  • Dual-Slot M.2 to SATA Adapter supports multiple RAID modes: RAID 0 / RAID 1 or spanning or JBOD.
  • Supports B key M.2 SATA SSDs including full-length M.2 SSD drives (2230 / 2242 / 2260 / 2280) (Not compatible with M.2 NVMe or AHCI PCI-Express SSDs).
  • TRIM support to enhance the stability and performance of your M.2 SSDs plus provides SMART support.
  • M.2 Adapter / M.2 SSD Adapter / M.2 SATA Adapter / Dual M.2 to SATA Adapter / M.2 Drive to SATA Adapter / Dual SSD Adapter / M.2 SATA SSD / m 2....
Check Stock

Cablecc USB 3.0 to SATA 22pin 2.5 Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD Adapter Converter

  • USB 3.0 to SATA 22pin 2.5" Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF and mSATA SSD Adapter Converter.
  • The item included one cable and one PCBA..
  • Build in Mini PCI-e 52pin Female connector.
  • Build in M.2 (NGFF) B key Female connector.
  • Insert both M.2 and mSATA SSD on the PCBA,M.2 SSD is the first priority.mSATA won't work. Support SATA Reversion 3.2.
  • PCI Express M.2 Spec.Revision 0.7, Version 1.0 PCI Express Mini Card Electromechanical Spec.1.2 PWM synchronous buck converter Power IC 3A maximum output current Short circuit protection In-rush current suppression Thermal shutdown protection ESD HBM (Human Body Mode)/2KV Note: The adapter only work for B-key or B/M-key socket, cannot work for M-key socket..
Check Stock

Geekworm T300 V1.1 2.5 inch SATA SSD/HDD Shield Storage Expansion Board Compatible with Jetson Nano A02/B01/2GB/4GB Developer Kit

  • Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
  • Ideal storage solution for Jetson Nano- 2.5" SATA HDD/SSD Shield.
  • for the T300 metal case, refer to ASIN: B07W7CNSR8.
  • for the T130 mSATA SSD shield, refer to ASIN: B088N6VZL8..
  • A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
  • Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed.
  • Intelligent power management - Automatic powering off when system shutdown.
Check Stock

GeeekPi Raspberry Pi 4 SATA Storage, Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Expansion Board X825 V2.0 USB3.0 Shield (Only for Raspberry Pi 4B)

  • Only For Raspberry Pi 4 Model B, supports up to 4TB 2.5 inch SATA hard disk drives (HDD) / solid-state drive (SSD), Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 board.
  • X825 Case,please refer to ASIN: B093WYWVRX.
  • Power supply request: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output , Please use high quality DC 5V 4A power supply, highly recommend to use ASIN: B07YJDS71K(With TUV,FCC,RoHS,CE Certifications). If you get low quality power supply to use, it may probably will damage your 2.5 inch HDD/SSD or not recognize the HDD/SSD ..
  • OS compatiable: All Raspberry Pi operating systems.
  • USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller.
  • Package Includes:1 x X825 V2.0 Expansion Board, 1 x USB 3.1 connector ,1 x Mounting Screws Pack.
  • Note: The Raspberry Pi 4B board and the 2.5" SATA HDD/SSD are Not Included.
Check Stock

ELUTENG NGFF M.2 to SATA Converter Adapter M.2 NGFF to 22-Pin SATA III Card Based Key B/B + M 2280 2260 2242 2230mm SSD Super Speed 6Gbps for Laptop Desktop

  • 【M2 SDD to SATA Adapter】 Easily convert ngff SATA Key B / B+M ssd to a external 7+15 pin solid state drive card, add extra storage space for your....
  • 【Notice】NOT support any PCIe NVMe / AHCI Key M SSD. If you have a brand new ssd, please format the ssd before use. Otherwise, it may not be....
  • 【Support M2 SSD】2280 / 2260 / 2242 / 2230mm M.2 NGFF(SATA) SSD, and sata 3 interface with max transfer rate up to 6Gbps..
  • 【Stable Transmission】Adopt large capacity capacitance, high power LDO Control chip, ensure more stable performance, and enjoy faster transmission..
  • 【Easy installation】No driver required. Any questions about m.2 sata converter, please feel free to contact us. Note: The installed screwdriver is....
Check Stock

NFHK 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD to SATA 3.0 III Adapter Converter PCBA

  • 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD to SATA 3.0 III Adapter Converter PCBA, 2.5" SATA SSD Form Factor : 98 x 65.5mm.
  • M.2 (NGFF) & mSATA to SATA III Module, Build in Mini PCI-e 52pin Female connector, Build in M.2 (NGFF) B key Female connector, Insert both M.2 & mSATA....
  • PCI Express M.2 Spec. Revision 0.7, Version 1.0, PCI Express Mini Card Electromechanical Spec. 1.2, PWM synchronous buck converter Power IC.
  • 3A maximum output current, Short circuit protection, In-rush current suppression, Thermal shutdown protection, ESD HBM (Human Body Mode)/2KV.
  • the MSATA and NGFF SSD cannot work at same time. The adapter only work for B-key or B/M-key socket NGFF SSD, cannot work for M-key socket..
Check Stock