Reviews Sanding Rolls For Die Grinder

5\ EXTENSION PNEUMATIC POWER POWERED EXTENDED LONG SHAFT AIR DIE GRINDER TOOL

  • ... maneuver and perfect for one-handed grip. The ergonomically designed body is comfortable to hold for long work sessions..
  • High Free Speed - The Pneumatic straight die grinder operates at a maximum speed of 25,000 RPM continuous power with an air compressor, which allows for precision cutting, grinding, shaping, and sanding. Operating pressure: 90psi (6.3bar). Air consumption: 85.5l/min (3cfm). Note: Use sealant tape to avoid air leakage..
  • Rear Exhaust - A rear exhaust makes the lower sound level possible, while also ensuring that the exhaust isn't hitting the operator in the face. The air inlet filter could keep the die grinder from contamination. Note: Add oil regularly is needed for all air tools (lubricant included)..
  • Wide Application - The air compressor usually provides higher RPM than the electric motor, and they can maintain it indefinitely as long as your air compressor is large enough. This straight die grinder weighs less than one pound and can reach up to 25000RPM continuous power, suitable for welding repair, fabrication, cutting, polishing, grinding, and general machining for Automotive Pros..
Check Stock

RYOBI ONE+ HP 18V Brushless Cordless Compact 1/4 in. Right Angle Die Grinder (Tool Only)

  • ...throttle lever so it prevents accidental start-up. Note: Please remove the DUST PLUG before insert the air connector..
  • 【High Free Speed 】The Pneumatic straight die grinder operates at a maximum speed of 20,000 RPM continuous power with an air compressor, which allows for precision cutting, grinding, shaping, and sanding. Operating pressure: 90psi (6.3bar). Air consumption: 85.5l/min (3cfm). Note: Use sealant tape to avoid air leakage..
  • 【Ideal for One-Handed Grip 】The small, lightweight design provides easy operation, and greater access to tight spots. The air die grinder measures 6-5/16 inch long and weighs 1lbs, comfortable for maneuvering and perfect for one-handed grip. With the ergonomically designed body, it is easy to hold for long work sessions..
  • 【Rear Exhaust】This die grinder features a rear exhaust to direct air away from work, making the lower sound level possible, while also ensuring that the exhaust isn't hitting the operator in the face. The air inlet filter could keep the die grinder from contamination. Note: Add oil regularly is needed for all air tools (lubricant included)..
  • 【Wide Application】 The air compressor usually provides higher RPM than the electric motor, and they can maintain it indefinitely as long as your air c....
Check Stock

200 Pcs 2 Inch Sanding Discs 36/60/80/120 Grit Discs Aluminum Oxide Coated Die Grinder Accessories for Surface Prep Grinding Burrs Polishing Finishes Removing Rust Paint

  • Grinder Accessories Choice: the 2 inch sanding disc set contains 200 pieces of die grinder sanding discs, 4 models including 36, 60, 80 and 120 grits, 50 pieces for each type of sanding disc.
  • Sufficient quantity and multiple models of combination sets can meet your various grinding needs.
  • Easy to Use: the unique safety torque screw design on the change sanding pads can be easily and quickly assembled and tightened with the grinding wheel holder.
  • Knob installation design, convenient to replace the grinding head after consumption, reduce resource waste.
  • Stable and Safe: the aluminum oxide particles on the surface of the grinding wheel are evenly distributed, and the bonding is firm.
  • The back is reinforced with a patch, which has higher hardness, stronger grinding ability, and is not easy to drop sand.
  • The use process is more secure and comfortable.
  • Quality Material Selection: the disc is made of quality aluminum abrasive grains with good wear resistance and hardness.
  • The sanding disc as a whole has good elasticity and plasticity, and is suitable for objects of various shapes.
  • Scope of Applications: the grinder sanding disc set is suitable for grinding, deburring, polishing, rust removal and paint removal operations.
  • Whether it is wood, metal or plastic, ru....
Check Stock

2 Inch (50mm) Hook and Loop Sanding Pad for Sanding Discs with 1/4 inches Dia Shank Drill Attachment + Soft Foam Layer Buffering Pad (5 Pack)

  • ★ 【SIZE】Pad diameter: 2'' (50mm), shank diameter: 1/4 inch (almost 6.35mm). Buffering pad thickness: 1/2 inch (13mm)..
  • ★ 【SHANK BACKING PAD AND BUFFERING PAD】6.35mm shank sanding pad suitable for most kinds of rotary tools, such as electric drills, die grinders, air grinders, etc. The max operation speed is 10000rpm. Buffering pad, suitable for uneven surface polishing, protection against damage to backing pad, convenient replacement..
  • ★ 【RELIABLE MATERIAL】 The sanding pad is made of polyurethane, with good durability and flexibility, reliable to use and not easy to break, it works for minimizing the heat transfer and increase the service life of the tools.
  • ★ 【APPLICABLE OBJECTS】 Our standard sanding disc replacement pads can work with die grinder, air grinder, electric drill and more, can withstand maximum operation speed of 10000 rpm, applicable to most rotating tools.
  • ★ 【VARIORS APPLICATION】 This buffing wheel disc pads are widely applicable in various surface buffing and cleaning, such as metal derusting, glass and ceramic polishing, marble, automotive and wood floor polishing, etc..
Check Stock

POLIWELL 200PCS 2 Inch Sanding Discs 60-10000 Grit for Drill Grinder Rotary Tools, 2pcs Soft Foam Buffering Pads + 1/4 in & 1/8 in Shank Backing Pads, Hook and Loop Wet Dry Sandpaper Disc

  • 【200 PACK 2” DISCS】White sanding discs: 20pcs each of 60 80 100 180 grit, 15pcs each of 240 400 600 800 grit.
  • Silicon carbide sanding discs: 10pcs each of 1000 1500 2000 3000 5000 10000 grit. Total 200 pack. Large quantity to meet your different polishing need..
  • 【1/4 & 1/8 INCH SHANK】 1/4 inch(6mm) shank and 1/8 inch(3mm) shank replacement pads can work with die grinder, air grinder, electric drill, electric grinder and more, applicable to most rotary tools. Minimizing the heat transfer and increase the service life of the tools..
  • 【SUPERIOR MATERIAL】POLIWELL white discs made with super coated aluminum oxide corundum for a sharp cut and uniform finish. Silicon carbide 2 inch sanding discs ideal for wet and dry sanding. Hook and loop design for quick remove and replacement. 2 inch interface pads made by soft foam perfect for precision sanding, reduce shake, improve abrasive cut and finish..
  • 【60 - 10000 GRIT SET】POLIWELL sandpaper discs deliver a fast, exceptionally long lasting cut and polish with a consistent scratch pattern for auto body and painting, wood working, metal working, fiberglass, rubber, leather, stone, primers and plastics..
  • 【ANTI-CLOGGING】POLIWELL 2” sanding discs have maximum resistance to clogging and loading which....
Check Stock

ABN Aluminum Oxide Roloc Abrasive Sanding Discs 50-Pack, 2” Inch, 60 Grit – Metal Wheels for Surface Prep and Finishing

  • PREMIUM SANDING DISC SET: Use the ABN 50 Pack Aluminum Oxide Roloc Sanding Disc 2 Inch Grinding Disc Set, 60 Grit, to prep, finish, and polish various materials.
  • High-speed sanding grinds particles and removes target coating and scratches to leave you with a smooth, uniformed surface.
  • 2 inch sanding disc provides the perfect size for tightly-contoured sections or large surface areas.
  • EASILY REMOVE RUST, PAINT, AND OTHER COATINGS: Whether you are using these round sandpaper discs to clean and deburr or to blend, finish, and polish, they will get the job done.
  • These roll lock metal sanding disc tools will help you remove paint, rust, glue, or other stubborn adhesives and materials.
  • BUILT TO LAST: Aluminum oxide abrasive orbital sanding discs are known for their low heat retention, superior cut rate, and durability making them ideal for prepping and finishing soft and hardwoods, chip and fiber boards, plastic, rubber, cork, ferrous and non-ferrous metals, painted surfaces, and other building materials.
  • Aluminum oxide material is bonded with resin to provide resistance to overload when working.
  • FITS YOUR TOOLS: Quickly and easily replace your used grinding discs.
  • Each roll lock drill grinder disk has a unique r-type torque screwed attachment that allows ....
Check Stock

Tshya Quick Change Grinding Disc, 50 Pcs 2 inch Sanding Discs, Zirconia Coated Roll Lock Disc for Surface Prep (36 Grit)

  • ✔ FIRST CHOICE - Premium Zirconia sandpaper with strong twist lock shank base, 36 Grit roloc sanding disc provides durability and high performance for grinding on all metals..
  • ✔ EASY TO USE - All it takes is one simple turn and the disc is securely locked onto the mandrel. Use with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control..
  • ✔ MORE APPLICATIONS - Its ideal for heavy grinding operations on hard materials (stainless steel).Perfect for home improvement whether it is for woodworking, carving, fabrication, construction or crafting.
  • ✔ 50 PACK - 50 Pcs 36 Grit Zirconia 2 inch sanding discs..
  • ✔ FACTORY OUTLET- Factory mass standard production, Guaranteed quality..
Check Stock

Khanka Hard Storage Case Replacement for Milwaukee 2485-20 M12 FUEL Right Angle Die Grinder, Case Only

  • Sleek design, a case designed for milwaukee 2485-20 right angle die grinder, fits perfectly. The hard shell of this milwaukee m12 grinder is black. You can put the m12 grinder in a hard case specially designed for the milwaukee right angle die grinder for easy portability when you go out..
  • This milwaukee m12 angle die grinder hard case, the interior is made of high quality velvet, the soft inner structure ensures the protection of the milwaukee tools angle grinder. The milwaukee m12 die grinder has a hard case with a mesh design on one side to store your m12 die grinder accessories and soft storage on the other side for your milwaukee die grinder..
  • This milwaukee die grinder m12 hard shell case is made of high quality EVA material, which is shockproof, dustproof and waterproof, it can protect your milwaukee small angle grinder from shocks and splashes when you go out to carry. Put the milwaukee angle grinder tool in the box after using the milwaukee 2485-20 right angle die grinder at home to prevent the milwaukee m12 grinder from accumulating dust.
  • This hard case designed for m12 2485-20 grinder keeps your milwaukee right angle die grinder safe, convenient and lightweight. The classic zipper design makes it easy to open and close. This milwaukee m12 ang....
Check Stock

YON.SOU. Air Die Grinder - 1/4\

  • ⚙️ 90 DEGREE ANGLE HEAD: The right angle die grinder is ideal to work in tight spaces where a straight die grinder can not reach. The right angle style makes it easy to maneuver and precise to control with a clear view of working surface. You wouldn't worry about tight spaces and small jobs anymore with this 90 degree die grinder..
  • ⚙️ POWERFUL AND DURABLE: The pneumatic die grinder features a 0.3 HP motor whose free speed could be up to 20,000 RPM. Inner movement part is made of tungsten steel which could be more resistant to high temperature to prevent overheat. This 1/4" die grinder has long service life with aluminum housing and ball bearing construction..
  • ⚙️ COMPACT&LIGHTWEIGHT DESIGN: The compact and lightweight designed pneumatic angle die grinder is super easy for maneuverability and brings more accuracy, ergonomic designed die grinder body is perfect for one-handed grip. The 90 degree angle head brings more accuracy and possibility to those tight spots and hard reaching jobs..
  • ⚙️ SAFE&EASY to USE: The safety lock of the air angle grinder could prevent accidental engagement, you wouldn't get hurt even if you just start to learn to use the air die grinder. The air inlet filter could keep the die grinder from contamination. Bui....
Check Stock

S SATC Sanding Discs Roloc 50 PCS for Die Grinder 2 Inch Roloc Disc Aluminum Oxide 36 Grit Quick Change Disc

  • Size：Sanding disc roloc has 2 inch with 36 grit with 2 inch which is the best choose.
  • Material: Roloc sanding discs are made for high quality professional aluminum oxide.
  • Advantage: Roloc disc is easy to assemble and quick to change. Long lasting. This product is ideal for surface prep and finishing work and leaves surfaces with finishing.
  • Application: Roloc sanding discs will quickly remove gasket materials and used to quickly remove cut paper or paper gaskets prior to the assembling of power train components, engine blocks, heads, and valve covers.For cleaning and metal etc..
  • Note: Roloc quick change disc use with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control. They will sand, level, strip, polish, debuff.
Check Stock