Reviews Sampling Tubing - BestBuyersPro.com

Whirl-Pack Write-On Whirl-Pak Collection Bags - Box of 100 - C32520N

...ressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finger tight..
To withdraw the sample using a syringe: 1. Insert the needle into the red septum on the top of the fitting. 2. Withdraw the sample and remove the needle, the septum will reseal itself. (Do not allow the needle to pierce the Tedlar film on the back side of the bag).

Filter media: 0.45 µm poleythersulfone (PES).
Fittings: stepped barb fitting for 1/4 to 3/8 inch tubing.
Suitable for filtration procedure outlined in EPA Method 3005 for ground water analysis.
Specifically designed to filter ground water samples before dissolved metal analysis.
Can be used as a convenient in-line filter unit.
connects directly to outlet of a sampling pump.

Materials of Construction: Inlet-Cover, Base, and Collar Cap: Anodized aluminum, Hose Barb Adapters: Polyethylene, Support Screen and Underdrain Disc: Electropolished type 316 stainless steel, O-Ring: Viton, Thrust Ring: PTFE and Effective Filtration Area 9.6 cm2.
Dimensions: Overall Length (Excluding Hose Barbs): 5.7 cm (2.2 in.), Diameter: 5.9 cm (2.3 in.), and Inlet/Outlet Connections: 3⁄8 in. FNPT.
hose barb adapters accept 6.4 mm (1⁄4 in.) ID tubing..
Maximum Operating Temperature: Limited by filter type, hose barb adapters 93 °C (199 °F), or O-ring 204 ºC (399 ºF) and Maximum Operating Pressure 14 bar (1400 kPa, 200 psi)..
Sterilization: Provided non-sterile. Autoclavable if desired at 121 - 123 ºC (250 - 253 ºF) at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min..
Pall 47 mm In-line Lab Filter Holder, Lightweight, Anodized Aluminum Filter Holder Convenient design allows opening and closing without disrupting membrane. Designed for in-line liquid or gas filtration, Durable construction for stack sampling. Type Filter Holder.

【High Quality Material】The sampling valve is made of high-quality SUS304 stainless steel, chemically stable, durable and anti-rust.
【Food Grade】During the sampling process, our food grade hygienic sealing rubber ring and smooth inner wall can ensure that the medium is pollution-free and the sampling is convenient.
【Precision Construction】The sampling valve consists of a simple valve, a handle and a diaphragm. The rubber diaphragm on the valve stem is used as a tension plug when obtaining a sample of the medium in the pipeline or equipment, which is convenient to use.
【Widely Used】Our grab valve is suitable for industrial fields of dairy products, cosmetics, food, pharmacy, beer, chemical, petroleum, metallurgy, water heating, food, pharmaceutical, etc..
【Specifications】Surface Finishing: Mirror polish--Pressure: Normal pressure--Connection Type: Fast clamp connection--Ferrule Size: 50.5mm/2in.

HDPE and HDPP dippers are chemical and corrosion resistant.
Firm sampling bowl is welded to reinforced 29mm (1-1/8") diameter handle.
The bowl is attached at a 45 degree angle for easier sampling from an elevated position.
Choose from a variety of handle lengths all that have a hook at end for hanging storage.
Available with a scoop end for sampling dry materials.
Safely gather samples from tanks, vats, lakes and rail cars.

Unique sampling-pad concept — the only instrument of its kind in the world.
4 GB internal memory, enabling approximately 720 minutes of sampling (mono) without requiring external memory.
Nine velocity-sensitive rubber pads, two external dual-trigger inputs.
Easy capturing and assignment of audio data through Multi-Pad Sampling.
Three units of multi-effects onboard, with two real-time control knobs and four dedicated effect buttons.

⚛️ POINT SAMPLING: Perfect for point probe sampling or continuous sampling in confined or toxic spaces. DC Pump flow rate 0.5LPM with USB recharge. Comes FACTORY CALIBRATED. Turn ON and GO..

Unique sampling-pad concept — the only instrument of its kind in the world.
4 GB internal memory, enabling approximately 720 minutes of sampling (mono) without requiring external memory.
Nine velocity-sensitive rubber pads, two external dual-trigger inputs.
Easy capturing and assignment of audio data through Multi-Pad Sampling.
Three units of multi-effects onboard, with two real-time control knobs and four dedicated effect buttons.

AC Adapter/Charger - Power Cord - DC Cable - BP-970G Battery - Lens Hood - Lens Cap - USB Cable - Microphone Holder Unit.
Canon's adaptation of MPEG-2 for the XF100 Professional Camcorder, named the Canon XF Codec, ensures the widest compatibility with existing industry infrastructure.
4:2:2 Color Sampling: 4:2:2 color sampling provides twice the color resolution of HDV and other codecs that use 4:2:0 color sampling.
Record to Compact Flash Cards: The camcorder features two CF card slots and offers versatile recording functions including relay recording, hot swapping, file copy and backup, and pre-record.

BRIEF INTRODUCTION: 100M high sampling rate, 16 channels, 10G depth, multi-logic level threshold voltage adjustable. Supports multiple protocol parsers and integrates 2-channel PWM generators. Ideal tools for system development and debugging such as MCU, ARM, FPGA, etc..
POWERFUL SOFTWARE: The supporting software and resources can support Chinese and English, and the Chinese and English software languages can be adjusted. It supports for Windows XP/7/8/10, for Linux, for MAC OS and other operating systems. It is more powerful and better than oscilloscope in digital signal analysis..
BASIC PARAMETERS：Input channels number: 16.
Sampling rate: 100M@3CH, 50M@6CH, 32M@9CH, 16M@16CH.
USB 2.0 interface, Max sampling depth: 10G.
SUPPORTED STANDARD PROTOCOLS: UART/RS232/485, I2C, SPI, CAN, SDID, DMX512, I21/PCM, JTAG, LIN, Manchester, Modbus, 1-Wire, SMBus, UNI/O. USB1.1, NEC Infrared, parallel, PS/2, etc.
FEATURES: Data display in decimal/hexadecimal/2/ASCII format is convenient for observation and analysis. Both sampling data and analytical data can be exported, which is convenient for archiving or other analysis software..