Reviews Router Parallel Guide

Flattening Workbenches and Wide Boards with a Router

  • ...for reference. Our coping sled uses the fence as a reference instead. The Rail Guide Coping Sled Pro features a clear acrylic fence for reference which is offset and raised 2” above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence.
  • This robust, full featured coping sled has a laminated ½” thick MDF base that slides across your router table surface effortlessly. The sled also features a large, heavy duty hold down toggle with a 1-5/8” hold down foot to keep your stock in place. The unit also includes two large and sturdy handles for guiding the sled through the cutter. The maximum stock size is 5” wide by 1 ¼” thick. Full instructions are included..
Check Stock

Router Table Coping Sled, Rail Guide Safety Coping Sled Router Table Tenoning Safety Pushing Clamp for Cutting Precise Joints for Cabinet Door Drawer Fronts Carpenters Woodpeckers Woodworking Tools

  • ...ear Acrylic Fence: Our coping sled uses the fence as a reference instead. The rail guide coping sled features a clear acrylic fence for reference which is offset and raised 2″ above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place..
  • How It Works: Hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
Check Stock

Fulton Rail Guide Coping Sled PRO For Cutting Profiles Into The End Grain Of Your Stock | Ideal for Cutting Precise Clean Joints for Cabinet Door and Drawer Fronts

  • ...for reference. Our coping sled uses the fence as a reference instead. The Rail Guide Coping Sled Pro features a clear acrylic fence for reference which is offset and raised 2” above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence.
  • This robust, full featured coping sled has a laminated ½” thick MDF base that slides across your router table surface effortlessly. The sled also features a large, heavy duty hold down toggle with a 1-5/8” hold down foot to keep your stock in place. The unit also includes two large and sturdy handles for guiding the sled through the cutter. The maximum stock size is 5” wide by 1 ¼” thick. Full instructions are included..
Check Stock

Woodpeckers Precision Woodworking Square 6\ x 4\

  • INCLUDES - You will receive two squares, the 3 1/2 inch and 6 inch Stainless Steel Delve Square from Woodpeckers. The squares includes their own Rack-It mounting kit for wall hanging..
  • BUILT IN SIMPLIFICATION - The 1/4 inch offset simplifies dividing standard 3/4 inch stock by thirds. The 3/8 inch offset locates the center of a 3/4" board instantly..
  • MILLED BEAM - The beam is milled giving you set-up bloacks of 1/4, 3/8, 1/2 and 3/4 inch..
  • PRECISION WOODWORKING - The scribing holds guide your pencil for perfect parallel lines and you can use thje set-up block sections for drill press or router bit depth of cut..
  • MADE IN USA - Like all Woodpeckers products, the Stainless Steel Delve Square is proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
  • 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock

Router Table Set Up Bars #PRS3400 Replace for Kreg-(Set of 7).

  • 【Router Auxiliary Tool】 Are you still worried about not being able to use compact router for getting quickly a straight line on the wooden board? Please use our auxiliary tool ——DNP618 Router Edge Guide, so you will easily get a straight line on the board! This tool is made of all iron, electrophoresis process anti-rust, hard enough not to bend, durable and has a smooth surface, which will not damage your wood board..
  • 【Multiple Adaptations】 This straight edge guide works for DCW600B 20V Max XR CORDLESS ROUTER, DWP611 COMPACT ROUTER, DNP612 Plunge Base, DW6913 Router Edge Guide, PORTER-CABLE 450 and 451, it will be a perfect addition..
  • 【Easy to Install】 The length of Edge Guide is 10 inch, use the included two screws to install the edge guide on the base compact router, and then you can get precise positioning of inlays, dadoes, and more..
  • 【Two Usages】 Like the picture instructions, you can get two usage methods. Extend from the edge of the material to 3 inches or more, If you use the second way to increase the length of the guide, this is very helpful when routing out past the end of your material to help keep the router from dipping into the wood and cutting too deep..
  • 【Precise Positioning】 Features an easy slide and lock positio....
Check Stock

POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops

  • Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit.
  • Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • Universal design:suited for most standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders.
Check Stock

POWERTEC 71022 6-1/2-Inch Universal Router Plate

  • Features: the 6-1/2” clear universal Router plate is pre-drilled for easy mounting onto most popular routers on today’s market. A unique construction of clear Hardened acrylic means you can easily view your work-piece while you are routing. A 1-3/16” center hole enables use with PORTER-CABLE style Guide bushings. A convenient center pin – for use with a guide Bushing – is included to ensure solid and centered attachment to your router. Its 5/16″ Thick acrylic makes for optimal durability..
  • VERSATILE COMPATABILITY: Accommodates to the following router makes/models: Porter-Cable (690 series, and models 7529, 8529), Bosch (1617, 1618), Craftsman (315 275 000, 315 175 040, 315 175 050, 315 175 060, 315 175 070), Fein (FT 1800), Milwaukee (5615, 5616, 5619), Makita (RF1101), Hitachi (M8V, M-12VC, TR12), Elu (177), DeWALT (DW621, DW616 series, DW625, DW618), Ryobi (R1631K), and other models with like specifications..
  • Applications: allows you to use PORTER-CABLE style Guide bushings for greatly increased precision and ease of use. Porter-cable style Guide bushings not included.
  • please see POWERTEC 71051 to order separately. Great for use as replacement plates, or as an upgrade to your existing router assembly..
Check Stock

Wood Router Tool Woodworking Trimmer - 6 Variable Speed 1.25HP with 15 Pieces 1/4" Router Bits Set Electric Handheld Corded Palm Wood Router

  • Woodworking router: 1.25HP handheld palm router with 15 pieces 1/4" Router Bits Kits for beginners and professional.Powerful 33000r/min no-load speed..
  • 6 Variable Speed: Powerful speed adjustable motor meets different wood crafting work demand.Fast changing chuck design,63 inch cord,transparent base,accurate gauge ruler..
  • Various applications in wood trimminng: package comes with straight guide,roller guide for carpentry wood laminating slotting , edge trimming..
  • 15 pieces 1/4" Router Bits Kits: Wood case router bits contains straight bit,V grooving bit,dovetail bit,round bit and so on..
  • Package Includes: 1.25 HP router tool with 5.2ft cord, 15 router bits in wood box, edge guide, roller guide,, wrench and replacement carbon brush..
Check Stock

POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit..
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots..
Check Stock