Reviews Round Steel Connector Cable

Element-Hz Subwoofer Cable 4 Meter, 13.1ft

  • RCA cable specifically created for subwoofers to achieve optimum performance.
  • Extra compact connector body design for tight spaces.
  • Increased shielding & thick gauge conductors | CL3 rated, round PVC jacket | Bare copper conductor.
  • Length & subwoofer text printed on connector end for flawless identification.
  • Gauge: 22 AWG | Connector: Gold Plated RCA | Length: 4 Meter (13.1 ft.).
Check Stock

Solsop Pass Through RJ45 Crimp Tool Kit Ethernet Crimper CAT5 Cat5e Cat6 Crimping Tool Kit

  • Fast, reliable ethernet Crimper tool for voice and data applications with Pass Through 50PCS RJ45 connector plug, 50PCS Covers Network/Phone cable tester, plier, Mini Cable Stripper (Replacement blades available).
  • Pass Through Crimper - Reduce prep work time significantly with Pass Through technology.
  • Compact Crimper - crimps and trims RJ45 Pass Through connectors onto paired-conductor cables (round STP/UTP cables).
  • Wiring diagram on the tool helps eliminate rework and wasted materials.
  • Phone/Network Cable Tester - Network Cable Tester for cables with RJ45/RJ11/RJ12 Connector (9V battery not included)； We can test our just finished cable in this tester, and we will quickly know whether this cable work or not.
Check Stock

200 Pack RJ12 6P6C Plug, Transparent Telephone Jack Flat Cable Modular Plug Connector Clear Line Snap-in Crimp-On Plugs

  • This item is RJ12 plug connector ,it used for the telephone cable ,it is with 50 microns of gold plating over nickel plating on contacts in order provide maximum connectivity & durability..
  • The gold plated leads for better data transmitting and higher signal strength..
  • Used to connect the phone cable/cord to the handset or to the headset via Amplifier or with other audio transfer application cables. For use with flat or round telephone wires up to 26AWG..
  • 6 Pins Phone Cable Heads Plugs / Single Size:9.5*13*9mm.
  • Package Included: 200 x RJ12 Plug Connector.
Check Stock

Avanexpress PLC Micrologix Cable USB Interface Compatible PLC Micrologix 1000 1200 1400 Series with USB-1761-CBL-PM02 8 Pin Round Aapater

  • Compatible with Micrologix 1000, 1200, 1400 Series.
Check Stock

Muzata 20Pack Curved Washer Saddle Washer for 2-1/16” to 2-3/8” Round Cable Railing Post Curve Surface Wood Metal Aluminum Post 13/32” ID Stainless Steel CB02 Series CA1 CS1 CS2

  • ...System - We pre-designed an Edgeless cable railing system to help you get a fully customized project. The system includes round posts PS21, round handrails HT20, cable railing kits CB07 CB17, protector sleeves CB02 CB41, angled washer CR62, stainless steel cable WR02, cable cutter CR12, socket wrench CT16, handrail connector HA03 HA08. (Please note that package ONLY contains contents as stated in bullet point 1, other stuff mentioned is NOT included).
Check Stock

Network Tool Kit, TEROW 11 in 1 Professional Ethernet Cable Crimper Kit with Crimping Tool, Rj45 Rj11 Cat5 Cat5e Cable Tester, Punch Down Tool, Rj45 Rj11 Connectors, Wire Cutter and Stripper

  • 【11 in 1 tool kits】The network cable set includes a network cable crimping plier, network cable tester, wire stripper, punchdown tool, flat /cross screwdriver, cable stripper, RJ45, RJ11 crystal connector, k1 connection terminal, connector covers. The tools are made of high-carbon steel and ABS plastic, which are corrosion-resistant and heavy-duty. The handle of the tool is designed with an anti-slip and comfortable grip. Provide you with a better experience in your daily networking maintenance..
  • 【3 in 1 Crimping Tool】Crimping plier, combining crimping/cutting/stripping, has a heavy-duty and sturdy carbon-hardened steel structure crimping modular plugs for Cat5 and Cat5e Cat6 cable with 8P8C, 6P6C plugs, or RJ45/RJ12/RJ11 connectors. The crimping tool also has strippers for round and flat cables that can be used for cutting various network cables and telephone lines, allowing people to easily handle network cables, termination, and troubleshooting..
  • 【Nerwork Cable Tester】The network cable tool kit also includes a professional cable tester, which can test BNC, RJH, and rj45, rj11, ST-248, cat5, cat5e. The LED indicator indicates whether the network cable ....
Check Stock

DALLUX Heavy Duty Vehicle Coil Trailer Cable with 2 Channel 4 PIN AV Connector Disconnect Kit for Truck Caravan Motor Home Backup Security Camera Monitor System

  • Rear view camera industrial-grade shielded spiral hitch cable set, for quick and easy connection to your backup and security camera and monitor..
  • This cable Suitable for 5th wheel,tractor trailer,trailer truck, caravan and horsebox. One cable carries power,ground, video and audio wires.No need additional power cable to connect the reverse backup camera..
  • Upgrade pure copper 8mm super thick wire diameter coil trailer cable with a Water Proof Rubber sleeve,stainless steel screw tight fixed for a good shockproof,longer life under kinds of weather condition..
  • The kit both side are 4 pin connector,one side is female connector and the other side is male connector for connecting with monitor and camera.The middle part is a coil adapter cable with male and female connector, With elasticity length from 60mm to 4000mm..
  • Special thick hard wire 100% shield offering super protection against vehicle’s circuit interference and other EMI RFI interference.Weather resistant locking cable connectors,weatherproof plug socket For Plug & Unplug Security & Easily..
Check Stock

150 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
  • Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
  • Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock

IWISS Battery Cable Lug Crimping Tool for 8, 6, 4, 2, 1, 1/0 AWG Heavy Duty Wire Lugs, Battery Terminal, Copper Lugs with Wire Shear Cutter

  • Large Wire Crimper: HX-50BI battery cable ring terminal crimper is designed to crimp 8, 6, 4, 2, 1, 1/0 gauge battery lugs, making secure connection with cables, electrical appliances, and other power mechanisms in harsh-duty environments..
  • Rotating Die Set: EDM cutting dies are more dimensionally accurate than stamped dies, prevent inaccurate crimps. Compact rotation die for effortless die changing. Size Coded Crimping: When properly crimped, the die code number will be embossed on the connector for easy inspection to determine if correct die and connector combination were used..
  • Hex-Crimp Result: Hexagonal crimping is a strong mechanical connection, creating large area of high pressure contact between cable and connector which in turn results in low resistance and high pull-out values..
  • Applications: Commercial Vehicles include emergency vehicles, generator sets (Gensets), recreational vehicles, trucks, cranes, and lifting equipment..
  • LK-60A Cable Cutter: Made of chrome vanadium steel with induction-hardened & beveled cutting edges for maximum strength and durability. Shear-type jaw for easily cutting through aluminum and copper cable up to 1/0 AWG. Not for use on steel or ACSR type cable..
Check Stock

200 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D..
  • Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock