Reviews Rotary Tool For Stone Carving

TianTac Tungsten Carbide Rotary Burr Set 10pcs Carving Burr Bits with 3mm Shank 6mm Bit for Wood & Stone Carving Steel Metal Working

  • Material: This carbide burr set/rotary bit set is made of premium tungsten Carbide steel which has long working life, Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Please check the size before you buy it..
  • Multi-Purpose: This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts..
  • Great Processing Quality: with this burr set, the surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold..
  • Those carbide burr rotary bit is generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute..
  • Full Customer Satisfaction, If you’re not 100% satisfied with your purchase, please get back to us, we will offer refund or replacement to make sure your full satisfaction..
Check Stock

Dremel 729-01 Carving & Engraving Rotary Tool Accessories Kit, 11-Piece Assorted Set - Perfect for Use On Wood, Metal, and Glass

  • Turn your Dremel rotary tool into a versatile carving machine with the 11-piece carving & engraving micro accessory kit..
  • Kit includes a reusable storage case and a variety of accessories to allow you to carve, etch and engrave in a variety of materials including steel, wood, plastic, glass, stone, ceramic, and more..
  • Carving/Engraving Accessories: 105 1/32" Engraving Bit (x1), 106 1/16" Engraving Bit (x1), 107 3/32" Engraving Bit (x1), 108 - 1/32" Engraving Bit (x1), 7103 5/64" Diamond Wheel Point (x1), 7134 5/64" Diamond Wheel Point (x1).
  • Sharpening/Grinding Accessories: 83142 9/32" Silicon Carbide Grinding Stone (x1), 83322 - 1/8" Silicon Carbide Grinding Stone (x1), 83702 1/8" Silicon Carbide Grinding Stone (x1), 84922 3/16" Silicon Carbide Grinding Stone (x1), 85602 13/32" Silicon Carbide Grinding Stone (x1).
  • USA-BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

Diamond Burr Bits ZFE Diamond Burr Bits Drill Kit for Rotary Tool Metal Woodworking Router Grinding Engraving Carving- 1/8 3mm Shank Pack of 90Pcs/ 3 Sets

  • ▲90pcs Diamond Burrs - Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing.
  • Work on glass, metal , stone, ceramic, wood, plastic.
  • ▲Sold Storage Box - PC plastic box is sturdy, falling resistant and moistureproof, easy for carrying and hanging.
  • All parts were in order and set was complete, well organized to prevent scattered and confused.
  • ▲Different Sharp Bits Accessories - 30 Style different sharp router bit can reach More Carving, Great for all types of detail work..
  • ▲Wide Usage - 1/8" diameter shanks, compatible with most rotary tools.
  • Ideal for home improvement, craft and whenever you need to polish, grind, drill, cut, engrave, and more,used with most rotary tools ,Able to engrave on a wide range of materials including: wood, ABS, acrylic, PVC, plastics, etc. Well-suited for detailed work, such as building and sanding dollhouse furniture, model trains, or miniature buildings,Highly recommended for jewer.
  • ▲What You Will Get - ZFE 90-Piece rotary tool carving,engraving bits kit and our best service.
Check Stock

Dremel 730-01 All-Purpose Rotary Tool Accessories Kit - 52 Piece Assorted Set- Includes a Carving Bit, Sanding Drums, Grinding Stones, Cutting Discs, and a Storage Case

  • Versatile Accessory Kit: The 52 piece All-Purpose rotary tool accessory set is the complete start-up kit you need to complete a wide range of projects. Ideal for cutting, carving, engraving, grinding, sharpening, sanding, cleaning and polishing..
  • Compact Case: Accessory set includes a reusable storage case for easy organization of the included bits..
  • Carving/Engraving Accessories: 194 1/8" Carving Bit (x1).
  • Grinding/Sharpening Accessories: 952 3/8" Aluminum Oxide Grinding Stone (x1), 85422 25/32" Silicon Carbide Grinding Stone (x1).
  • Cutting Accessories: 409 15/16" Cut-Off Wheel (x36), 426 1-1/4" Cut-Off Wheel (x1).
Check Stock

Dremel Max Life 9901HP 1/8" (3.2mm) Tungsten Carbide Rotary Carving Bit

  • Dremel's line of Max Life high-performance rotary tool accessories provide long-lasting performance and impressive durability. Built to give you longer lasting, stronger performing, versatile accessories..
  • The Max Life 9901HP Tungsten Carbide Carving Bit is coated in titanium nitride and is engineered to last 2X longer than the standard, non-coated Dremel 9901 carving bit..
  • The tungsten carbide bits can be used for more aggressive applications to shape, smooth, or grind hard materials such as metals, hardened steel, fire ceramics, cast iron, plastics, and hardwoods..
  • The cylinder shape of the carving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and v-cuts.
  • Ideal for projects like metal or glass engraving, stone carving, or removing flash from castings.
Check Stock

HOMEIDOL Carbide Burr Set Die Grinder Bits Rotary Tool Bits 1/8 Shank 10 PC Double Cut Wood Carving Accessories Cutting Burrs Metal Grinding Engraving Polishing Porting Trimming

  • √【Material】Double cut carbide rotary burr set,tungsten carbide,can be used to process: iron, steel etc.. Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Total length: 45-50 mm( 1.77-2 inch).1/8” fits dremel tool, straight shank can be held by most rotary tool with three jaw chuck for accurate centering.Please check the size before you buy it..
  • √【Durable】Carbide rotary burr's packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns..
  • √【High efficiency and Practical】The rotary tools processing efficiency is higher than the manual file tool. 10 different types of carving kit drill bits, meet your different needs.No wear out after a long time use. The shaft will not bend at high speed..
  • √【Double Cut Design】 The double cut burr head groove lines of the head are crossed, produces a finer finish than single cut and reduces the size of the chips and slivers. It also gives greater tool control..
  • √【A Good Rotary tool】 A good choice of DIY carving, engraving, and polishing. Suitable for multiple types of rotating tools.Making DIY carving fans much easier to do the wood carving job.It is also an ideal gift for woodcarvers..
Check Stock

Cordless Rotary Tool NEU MASTER, 3.7V Mini Rotary Tool Kit With 55pcs Accessories, 3-Speed USB Charging Power Rotary Tool for Sanding, Polishing, Engraving, Drilling and DIY Crafts

  • 【MULTIPURPOSE ROTARY TOOL SET】- Compared with most rotary tools , NEU MASTER cordless rotary tool provides 55 practical power rotary tool accessories, suitable for wide applications, such as polishing, sanding, engraving, grinding, carving and drilling work. Easily meet your need for DIY and home improvement work,NOT for heavy duty projects. A great idea for craft creation in wood, plastic, ceramic tile, glass, stone, metal..
  • 【EASY OPERATION & COMPACT】- Easy operation. Ultra compact, ultimate precision, comfortable control operation, lightweight, small but powerful.No wrench needed, it is easy to change bits and collets tool free with NEU MASTER rotary tool. Easy to maintain accurate concentricity while using the chuck to fix accessories..
  • 【3 POWERFUL SPEED & GREAT VENTILATION】- One button to switch rotation speed among 5,000, 10,000 and 15,000rpm, which allows to easily control speed and adapt to power needs in most of working application. Allow you did your projects safely and precisely. The ventilation holes on housing effectively dissipate the heat of running motor, keep consistent performance,extend battery and tool's life..
Check Stock

VEVOR S-R Hanging Flex Shaft Grinder 230W Rotary Tool with Stepless Speed Foot Pedal Rotary Carver 0-180000rmp for Carving, Buffing,Drilling,Polishing (6mm flexshaft)

  • Flex Shaft Grinder Carver Rotary Tool Kit. Perfect for carving, buffing, drilling, polishing, sanding, cutting, cleaning and grinding..
  • Power: AC 110V 380W 1/4HP. This powerful motor turns bits at speed ranging 500-22000rpm, delivering the performance you need for numerous tasks..
  • Foot pedal is included which makes your hands more comfortable during work. The ABS plastic foot pedal for flex shaft rotary tool is more secured than any metal variant due to its safety-oriented material which prevents heat production or transfer..
  • Some practical attachments included in the flex shaft grinder set come in handy for cutting, drilling, polishing, deburring and more..
  • Ideal for precision work. Professional rotary tool for finishing, polishing, adding textures and reaching small spaces as well as delicate areas. As this tool can be used for different places and materials, such as metal, wood, stone, jewelry, etc..
Check Stock

Tungsten Carbide Rotary Burr Set 20 Pcs 1/8 Shank Die Grinder Bits Double Cut Rotary Burrs Set for DIY Woodworking Drilling Metal Carving Engraving Polishing

  • These carbide burr sets are made of Tungsten Carbide steel which has long working life with high precision shape..
  • This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts..
  • The groove lines of these carbide rotary burr's head are crossed, which makes it more suitable for materials with relatively low density, such as wooden, plastic and aluminum..
  • These cutting burrs can work on wood metal plastic ceramic stone glass etc. 20 PCS burr set are ideal choices for your various DIY arts and crafts..
  • 20 kinds of rotary burr set type can meet different work such as carving sculpturing polishing deburring grinding cutting chamfering milling cleaning porting.
Check Stock

ILOVETOOL 25mm Inverted Cone Diamond Bits Burr Masonry Carving Tools for Gem Stone

  • Product Name:Inverted Conical Plated Rotary Bits Bur Gemstone, Grinding Head Jewelers Burs Shells Beach Sea Glass..
  • Head Diameter:25mm (close to 1"), Shank Diameter:6mm(close to 1/4").
  • Total Length:75mm (close to 3"), Grit: 60-80 (Coarse), Quantity:Only 1 Piece..
  • Product use: Apply to stone carving, jade carving, Gem peeled, bone carving, egg decorating, glass carving etc..
  • Used for sculpturing, dressing, precision grinding and internal grinding carbide in ceramic, glass, precious stone, alloy and many the abrasive materials..
Check Stock