Reviews Rotary Drum Pump - BestBuyersPro.com

TERA PUMP Heavy Duty Steel Barrel Clear Pump with Telescopic Suction Tube For use on 15 to 55 Gallon Drums Compatible Liquids Diesel Oil, Motor Oils, Heavy & Light Oils

[ TRANSFER RATES ] Transfers up to 10 Gallons per Minute with Manual Dual Directional Rotary-Action - Curved Gooseneck Spout with 0.9-inch Opening - Made of industrial strength cast-iron body with precisely machined iron vanes - Professional Geared Rotary Barrel Pump.
[ RECOMMENDED ] Suitable for Gasoline, kerosene, oil, diesel, hydraulic fluid, lubricating oil, antifreeze (ethylene glycol), ethylene glycol, other non-corrosive liquids - Portable, Light Weight and Heavy Duty Material - Filtered Suction Tube to prevent any unwarted debris.
[ TELESCOPIC TUBE ] Suction Tube length of about 40-inch, Fits 15-Gallon (50 Liters) and up to 55 Gallon (205 Liters) Drum Barrels - Suction end Outer Diameter: 1-inch - Complete with built-in & 2-inch NPS bung adapter for Drum Barrels with 2-inch Openings, Simply slide the bung adapter to the size of the drum.
[ MANAUL POWERED ] No Electricity Required: Utilizes lever-action to transfer liquids by a simple grip and pump - Works great with farm equipment, Industrial Vehicles and in Automotive Shops - Quickly Empty 55 Gallon Drum Barrels.

Rotary drum pump for dispensing chemicals.
Ryton (PPS) body for high temperature rigidity and resistance to chemicals and flame, 304 stainless steel components and PTFE seal for resistance to chemicals and corrosion.
1" NPT suction port and 3/4" UNF discharge port.

Rotary drum pump for dispensing flammable liquids.
Cast iron body for strength and durability with aluminum nozzle for lighter weight and corrosion resistance and neoprene dispensing hose.

100 PC 1/2" (12.7mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
100 piece 1/2" (12.7mm) 60 Grit, 1/2" (12.7mm) Diameter.
2 piece 1/2" (12.7mm) X 1/2" (12.7mm) Rubber Mandrels.
1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..

100 PC 1/4" (6.35mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
100 piece 1/4" (6.35mm) 60 Grit, 1/4" (6.35mm) Diameter.
2 piece 1/4" (6.35mm) X 1/2" (12.7mm) Rubber Mandrels.
1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..

[ Ideal Liquids ] Ideal for dispensing water based solutions of acid, alkalis and salt, water and all petroleum products (Not Gas), most organic acids, solvents, waxes, planting solution, detergents and water-soluble inorganic chemicals - Useful in the garage, shop, yard, farm, dock, snow or campsite - Rotary-Action: Manual piston allows easy to use oil transfer without the need for electricity.
[ Compatibility ] For use with 50 - 205-Liters Drum Barrels or 15 to 55 Gallon Drums, 15 Gallon Drums: Remove the middle segmented tube, 30 to 55 Gallon Drums: 3pc suction tube must assembled for 55 Gallon Drums - Adjustable Height bung adaptor for use on drums with 2-inch openings - To initiate fluid transfer, start pumping the lever until fluids are flowing from the discharge spout.
[ Sturdy ] Constructed of Glass-filled polypropylene pump with Ryton Vane and Viton seal and backed by a 1 year manufacturer warranty.

Package contains: 458 pieces of rotary sanding bands, 24 packs of rotary sanding drum mandrels and 2 packs of self-tightening drill chuck..
6 grits accessories: six types of sanding drum grits, 80 grit, 120 grit, 240 grit, 320 grit, 400 grit and 600 grit..
Size: three sizes of sanding drum sleeves, 1/2 inch, 3/8 inch and 1/4 inch..
Wide application: this rotary tool sanding accessories set would meet almost all your requirements in nut-carving, metal, wood, plastic, jade, circuit board and other DIY processing..
Easy to use: just need to slide the sanding drums into the drum sander, make sure the drum has been screwed tightly, you can directly start your project..