Reviews Roofing Tools Equipment

PacTool RS501 Roof Snake Tool - Shingle Pry Bar - Heavy Duty Nail Remover Tool - Roof Shingle Remover - Professional Roofing Tools

  • COMMERCIAL CROWBAR: Replace old and worn-out composition roofing shingles in no time with our practical pry tool. Our roof snake makes removing and applying new shingles more accurate, efficient, and safer than traditional replacement methods..
  • ROOFING TOOLS AND EQUIPMENT: Never damage your roof again with this convenient pocket pry bar. Install new 3-tab shingles without bending or hitting surrounding shingles or accidentally striking your fingers with your hammer in the process..
  • HAND TOOLS: A must-have for all roofers, this tool is forged from high-strength steel and has a patented offset nail slot feature allowing you to align nails with the correct one-inch offset from the bottom edge of your current course..
  • NAIL PULLER TOOL: There is no need for a flat bar with this handy claw tip, Easily loosen and remove old, damaged shingles and nails by driving the claw end under the nail, rolling the nail out, and twisting the roof snake..
  • PACTOOL: Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line inspires craftspeople and DIYers to work smarter, measure better, and repair more efficiently..
Check Stock

Fall Protection Distributors LLC SSRA1 4 Piece ProPack - OSHA/ANSI Certified Standing Seam Roof Fall Protection Kit for Safety

  • ...e in the USA with a 14,500-lb breaking strength, it's also salt spray tested and can be powder coated to match your roof..
  • INSTALL QUICKLY: This roofing anchor won't penetrate standing seams, ensuring that your roofing job will remain intact. Installation of this equipment is fast and easy, as all you need are basic hand tools!.
  • LIFETIME WARRANTY: The SSRA2, crafted in the USA, has a lifetime warranty. Workers don't need to adjust the roof anchors because OSHA/ANSI testing to 5,000 lbs in all directions of pull allows access to both sides of the roof..
  • VERSATILE LIFE-SAVING DEVICE: The SSRA2 ProPack includes a torque wrench with a 3/16-inch socket bit, four packs of D-rings with 6061-T6 aluminum bodies, 3/16 hex bits, cupped tips, and nylon tip set screws for securing multiple devices..
Check Stock

4/09 Shingle Gauge, Engineering Shingle Gauge Tool, Roof Shingles Measuring Tool, Roofing Tools And Equipment, Roofing Tools, Measures And Analyze the Thickness of Shingle

  • 【4/09 Shingle Gauge】4/09 Shingle Gauge estimates the warranty level of asphalt composition shingles 3-tab Fiberglass, 3-tab Organic, and Laminated..
  • 【Function】Measures the thickness of shingle and based on analyses correlates that thickness to warranty level.Designed with the strictest analytical tolerances possible..
  • 【Professional Tools】This is a roofing tools and equipment that is designed with the strictest analytical tolerances and is to evaluate the relationship between the thickness of shingle and the warranty period..
  • 【Good Choice】 The roof shingles measuring tool has a 5-inch ruler on one side..
  • 【Pay Attention】This gauge is for use only on asphalt composition shingles installed prior to January 2011..
Check Stock

Abracadabra® - Contractor Strength Super Cleaner - Remove Tar, Adhesive, Asphalt, Sap, Grease, Stains and More From Most Surfaces Faster than Ever

  • Includes 1 Bottle of Abracadabra Contractor Strength Super Cleaner, 1 Industrial Strength Trigger Sprayer with a Viton seal..
  • Revolutionary Formula created exclusively for Contractors. Stronger than the competition..
  • Dissolves and Removes Roofing Tar, Adhesive, Asphalt, Sealants, Grease and all sorts of stains..
  • For use on Tools, Equipment, Masonry, Metals, Plastics, Fabrics, Ceramics, Fiberglass & more!.
  • Saves Time and Money. Insures a clean Jobsite..
  • Up to 24 times more powerful than leading brands..
Check Stock

Shingle Removal Tool,Roof Shingle Remover Roof Shingle Nail Puller Shingle Pry Bar,Roofing repairs Removing and installing replacement shingles,Professional Roofing Tools

  • 【Handy And Premium Quality】Our Roof Shingles Removers are Made Of Premium High-strength Steel,Portable And Handy Size For Easily Using And Storage.With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
  • 【Nail-slot and Claw Tip Design】The Nail-slot Head Can Help You Put the Nails Easily.Claw Tip Can Remove Nails Easily From Roof Shingles,Roof shingle remover Makes it way easier to nail underneath shingles and do repairs.During installation, with the extended offset head that holds a roofing nail perfectly and you can strike the offset head with a hammer..
  • 【Repair more efficiently】Professional Roofing Tools,it makes replacing individual or multiple Shingles a BREEZE.It saved pulling out old nails and lining up the new ones, For those who don't like being on the ROOF any longer than needed..
  • 【A Must Have for All Roofers】Shingle Removal Tool is a must have tool for roofing repairs, it makes removing and installing replacement shingles a breeze without damaging the top overlapping and outer shingles especially if your dealing with a roof that has some age on it..
  • 【Quality assurance】Any questions , any reason, you’re not happy with your purchase, please contact u....
Check Stock

L R Liquid Rubber EPDM Rubber and RV Roof Primer - Weatherseal Camper and Trailer Roofing Coating 1 Gallon

  • WHY EPDM PRIMER - EPDM Primer is a rubber polymer water-based roofing primer, designed for adhesion bonding on EPDM surfaces..
  • RV ROOFING MAINTENANCE - Weatherproof RV roofs and other EPDM rubber surfaces by first applying this EPDM Primer before applying the actual waterproof sealant or seam tape.
  • EASY TO APPLY - Apply using a conventional brush or roller equipment.
  • may also be sprayed using a delivery system and nozzles appropriate for this material.
  • APPLICATION - All surfaces should be clean, dry, and free of contaminants that may result in a surface that is uneven or not sound.
  • FOR A BULLETPROOF SYSTEM - Liquid Rubber RV Smart Cleaner before Primer application.
  • EPDM Primer improves adhesion for Seam Tape and other Liquid Rubber RV Roof Coating.
Check Stock

KwikSafety (Charlotte, NC) Hurricane KIT | 3D Full Body Back Support Safety Harness 6’ Lanyard 3'’ Anchor ANSI OSHA PPE Fall Protection Arrest Restraint Equipment Universal Construction Roofer Bucket

  • ...d and spliced connections ensure that the PYTHON meets ANSI, CSA, and OSHA standards. The tool lanyard attachment has 2:1 Safety Factor and can hold tools up to 20 pounds..
  • CROSS ARM STRAP (ANCHOR) – 3 foot long pass thru web anchor | Worker capacity is 310 lbs | Min. breaking strength is 5000 lbs | Anchorage equipment for a single user | The GIBBON GRIP cross arm strap is a premium fall protection tool / anchor strap with a large d ring connector | The perfect high rise guardian watching your back, web anchor fall protection arrest restraint safety equipment..
Check Stock

Supco SPP5 Hard Start Kit, AC Compressor

  • Efficient Performance: 10 gallon ultra large tank and 175 psi max tank pressure stores more air in the tank for longer tool run times.
  • Powerful Motor & Pump: 120V/60Hz, 15A,1.8 HP, UMC motor, 4 SCFM at 90 psi, 5.0 SCFM at 40 psi allows for quick compressor recovery time, it is enough to make it easily drive a variety of industry and household equipment.
  • Sturdy & Durable & Portable: The 10 gallon air compressor is made by high quality Q235B steel, oil-free pump for long lifetime and no maintenance. 2 big rubber wheels with hand carry, easy to move. noise level 80 dBA noise level for operational work environment.
  • Multifunction: This air compressor is designed for garage, jobsite and workshop, etc. Perfect used for inflating, cleaning, stapler pinner, brad/finishing nailer, roofing nailer, wrench, drill, paint sprayer, caulk gun, chisel and other tools.
  • What you get: 1 x 6 feet cord, 1 x ball drain valve, 1 x plastic filter, 1 x quick coupler, 2 x rubber wheels, 1 x user's manual, 1 year limited warranty.
Check Stock

Freeman PFL618BR Pneumatic 3-in-1 15.5-Gauge and 16-Gauge 2\ Flooring Nailer and Stapler with Case

  • ...of hardened steel. It comes with a carrying case, long reach fiberglass mallet with a padded grip, and adjustment tools..
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
  • Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA..
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt..
Check Stock

KwikSafety (Charlotte, NC) Tsunami (Premium Braided Rope) Vertical Lifeline ANSI OSHA Rope Grab Snap Hook Shock Absorber Fall Protection Line Kit Restraint System Roofing Safety Equipment | 50 FT.

  • ...ab that allows you to move freely & easily along the lifeline (not for horizontal use). Compatible w/ any fall protection harness, safety lanyard, roof anchor, rope ladder, or anchors w/ d-ring. Fall arrest system device best suited for (1) person w/ max capacity of 310lbs (total weight of person w/ tools & equipment)..
  • ANSI TESTED BY 3RD PARTY (Unique to KwikSafety Products) - All sizes (25 ft, 50 ft, 100 ft, & 150 ft vertical lifeline) are quality checked & thoroughly tested by an 3rd party accredited testing lab & it is in full compliance with ANSI/ASSE Z.359.15-2014. KwikSafety gets all of their products ANSI tested while majority of other safety companies do not & it is buyers beware. The vertical lifeline ft ropes energy absorber has a max braking strength of 1,800lbs & average arresting force of 900lbs..
  • OSHA COMPLIANT (Keep OSHA on Your Side) - Ideal for any project where OSHA compliance is required. Ideal for roofing safety kit, ladder roofing line, construction fall protection, gutter cleaning roof safety, installation roofing kit, inspection/maintenance roof fall protection, wind turbines, communication towers safety rope,....
Check Stock