Reviews Roofing Board

Bosmere Rowlinson A038 Swiss Cottage Playhouse

  • Solid board roof with mineral roofing felt.
Check Stock

Everhard Long Cut Insulation Knife with 3-5/8 long blade MK46000

  • Blade is longer than similar style knives. Great for Roofing ISO board..
  • Consistent edge quality. Sharp on all sides for stabbing and easy cutting..
  • Overall length: 7-1/2" - blade length 3-5/8".
Check Stock

AMES RESEARCH LABORATORIES MSS1 Maximum Stretch Roof Coating, 1 Gallon, White

  • Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
  • Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
  • 650% elongation – does not flake, chip or peel – elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
  • Non-toxic, eco-friendly, low VOC & made in the USA.
  • 1 Gallon – Our waterproof roof sealant is packaged in 1 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..
Check Stock

Round Plastic Cap Nail 1 Inch Roofing Nails Galvanized Tar Paper Nails for House Wrap Fastening Foam Board Roofing Felt Insulation Film 4000

  • Sufficient Quantity: you will receive 4000 pieces of plastic cap nails, ample amount to satisfy your daily use and replacement demands, you can also share with your friend.
  • Quality Material: the nail caps are made of quality plastic, reliable and sturdy, not easy to break or deform.
  • The nails are electro galvanized treatment, not easy to rust or corrode, providing you with a long use time.
  • Size Information: the nail cap is about 29/32 inches in diameter, the hole measures approx. 3 mm/ 7/64 inches in diameter, the roofing nails are approx. 1 inches in length.
  • Please check the dimension before purchasing.
  • Creative Design: the round plastic caps adopt a flexible round head that conforms to surfaces, making it harder for water to get under the cap, the integrated design saving you time and energy, convenient for you to use.
  • Where to Apply: the tar paper nails are widely applicable, suitable for securing roofing felt, sheathing, anchoring house wrap, fastening foam board, bringing you much convenience when using.
Check Stock

Freeman SSAF1534-2 15-Gauge 34 Degree Angle 2\ Stainless Steel Finish Nails (1000 count) Rust and Corrosion Resistant for PFN1564

  • Nailed It: These 15-Gauge 34 Degree Angle 2" Stainless Steel Finish Nails (1000 count) resist rust and can withstand corrosive environments without staining natural finish woods or pressure treated lumber, making them ideal for both indoor and outdoor applications. They are compatible with most finish nailers capable of firing 2" DA style 15 gauge 34 degree angle finish nails, including the Freeman PFN1564..
  • Pro Design: These versatile nails are designed for finish work such as base board, crown moulding, trim, door and window casings, cabinetry, furniture construction, and more. Each box includes 1000 nails to ensure you have plenty of fasteners on the job..
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt..
Check Stock

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
  • Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.
Check Stock

Yost Plastics - Plastic Cap Washers, Use with Nails or Screws, 500 Qty, 1-1/8' Made in The USA

  • Good for Radiant & Vapor Barriers, Roofing felt, Sheeting, Rigid Board Insulation, and House Wrap.
Check Stock

CREWTOWER Roofing Nail Gun, 15 Degree 3/4-inch to 1-3/4-inch Pneumatic Roofing Nailer, Heavy Duty Coil Roofing Nailer for Asphalt Fiberglass Shingles Lath Wire Fasterening Wooden Box Assembly

  • [Professional Nail Gun]: This roofing tool is made not only to get your work done, but also as a loyal servant to your beautiful life and dreams. This roofing nail gun is the right tool to assist you achieve those goals..
  • [Easy to Use]: With easy-to-load magazine, this roofing nailer is easy to load coil roofing nails. The quick-release nosepiece makes it easy to clear jams. Simply turning a wheel, you can adjust the nailing depth, and interchangeable trigger to switch firing mode..
  • [Powerful and Efficient]: This powerful air nailer is made of industrial-grade parts, firing engine provides quick response. Comfortable rubber handle and well balanced siding nailer gun body reduces fatigue for long time jobs. Large capacity magazine improves working efficency by minimizing replenishment time..
  • [Wide Applications]: This heavy duty coil roofing nailer is ideal for fasterning asphalt and fiberglass shingle, fasterning lath wire on plywood, siding installation and wooden box assembly..
  • [Tool Specifications]: The pneumatic coil roofing nail gun weighs only 5.67lbs with aluminium body, load capacity 120 nails, drives 15 degree wire welded coil roofing nails, nail length 3/4" to 1-3/4", shank diameter 0.12", air-powered, operating pressure 70-120PSI..
Check Stock

Ames Maximum Stretch - 4.6 Gallon Waterproof Sealant Membrane - Perfect For Roofing, Repairs, Concrete, EPDM & Wood - Liquid Rubber Sealer - Up To 650% Elastic - Made in USA

  • Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
  • Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
  • 650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
  • Non-toxic, eco-friendly, low VOC & made in the USA.
  • 4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..
Check Stock

Metal Roofing Screws 1000 10 x 1-1/2   Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • #10 Sheet Metal ROOFING SCREWS.  Our metal roofing screws are galvanized for corrosion resistance..
  • 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
  • The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.
Check Stock