Reviews Rods With Ducts

3/16" X 11 Ft Fiberglass Wire Running Kit

  • Kit Includes: 1 Flexible Extender, 1 Ring End For Pushing, 1 Hook For Pulling.
  • Also includes: 10 x 13″ glass reinforced polyester rods with threaded brass connectors.
  • Gain access to wire and cable without climbing into crawl-spaces.
  • Reaches into ceiling ducts and under floorboards.
  • Can be connected to extend up to 11 feet..
Check Stock

30 FT Dryer Vent Cleaning Brush,Dryer Vent Cleaner Kit,Chimney Cleaning Brush Kit,Fireplace Chimney Brushes Kit,Dryer Duct Cleaning Kit,Use with or Without a Power Drill 1 Year Warranty

  • ... Cleaner Kit】Includes twenty-three 410mm flexible rods, two dryer vent cleaner brush heads,two drill connections,a wooden handle brush,an electrical tape.Dryer Duct Cleaning Kit Extends Up to 30 Feet, reaching anywhere you just can't quite reach.Fireplace Chimney Brushes Kit work great with PVC, flex ducts, metal ducts, pipes, and delivers results fast.Note:Please don’t use it for flexible foil duct work..
  • ❤【Multifunction Cleaner Brush Kit】Dryer Vent Cleaner Brush Kit can easily be used on chimney, dryer vent, and any pipes. using dryer vent cleaner brush kit to cleaning the trapped lint and dust in dryer gap and exhaust port.and also for cleaning the coils behind your refrigerator,accumulating dust and dirt anywhere , this dryer vent cleaner brush kit can easily reach in and clean it.the highly flexible POM rod that can be bent up to 90°or more..
  • ❤【Easy To Use】Dryer Vent Cleaner Brush Kit can be used with or without any kind of power drill.Connect the brush head to any of the rods and secure each connection with duct tape for added reinforcement.Always use the drill in a clockwise direction and low speed to prevent the rods from unscrewing at the threaded connections.Fireplace Chimney Brushes Kit extremely dura....
Check Stock

Dryer Vent Cleaner Kit: 18 Foot Drill-Powered Rotating Lint Remover | Cleans Buildup In Dryer Vents With ease | Quick-Snap Locking Rods Won’t Unscrew In Ducts Like Others | Includes Bonus Lint Brush

  • DRILL-POWERED FOR MAXIMUM LINT REMOVAL: Attaches to any 18+ volt drill to blast through lint with ease. Get professional results at the fraction of the price..
  • REDUCES DRYING TIMES: 18-foot reach cleans ducts so that air can flow freely and dry your clothes faster. No more damp clothes. Dry your clothes faster using the shorter drying cycles..
  • DON’T RISK A DRYER FIRE: Failure to clean your dryers ducts is the leading cause of clothes dryer fires. Cleans using any ordinary drill..
  • SAVE HUNDREDS OF $$$$ PER CLEANING: Don’t pay a professional service $150 per cleaning when you can buy the Easy-Flow Dryer Cleaning Kit and clean dozens of times for a fraction of the price..
  • 100% SATISFACTION GUARANTEE: All rods are guaranteed for two years against breaking. Simply contact us for a free replacement, shipping included..
Check Stock

Jeemitery 24 Feet Fiberglass Fish Tape Cable Rods, Electrical Wire Running Pull/Push Kit | Fishing Feeder Pole Sticks Snake Tool for Coaxial Wall Wiring

  • ... are useful for electricians, builders, crafters, engineers, DIY’s when fishing electric, coaxial, CCTV, alarm, network, circuit, phone, audio speaker lines, video, HDMI, internet CAT5e, & CAT6 cables through thin exterior or interior drywalls, vents, suspended garage ceilings, attics, straight conduits, PVC, ducts, insulation, subfloors, basement crawl spaces, carpets, sockets, plugs, outlets, light switches & sailboat masts..
Check Stock

Draft Blocker 6 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector 6 Inch

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring....
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC....
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal....
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from....
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are....
Check Stock

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

Draft Blocker - 4'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

Frida Mom 2-in-1 Lactation Massager - Multiple Modes of Heat + Vibration for Clogged Milk Ducts, Increase Milk Flow, Breast Engorgement - USB Cord Included

  • Increase milk flow: vibration + heat bust through buildup + clogged ducts, and get milk flowing. Choose the mode you need to get the job done..
  • Relieve clogged ducts + engorgement: the breast care tool to have on hand for pain-in-the-boob nursing + PUMPING moments and to prevent other symptoms and supply issues..
  • Different ends + sides: help unclog stubborn ducts, pull out blocked milk and empty breasts..
  • Pocket-size + rechargeable. No batteries Needed, just recharge with USB cord - even on-the-go!.
  • Water resistant. Designed to be used for massages in the shower (when the flow won't go!)..
Check Stock

Allstar ALL42151 Black 3" x 10' Brake Duct Hose

  • Brake duct hose measures 3 inch diameter x 10 feet long.
  • Hose is flexible, features a non-kink design, and directs air from the front ducts to the spindle ducts.
  • Made from a black 3 inch double-ply neoprene-coated woven fiberglass hose with a spring steel inner and external fiberglass supports.
  • Features a smooth inner wall for unrestricted air flow.
Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Deflector Silver

  • 【Material】The 4 inch backdraft damper is made of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
  • 【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
  • 【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
  • 【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
  • 【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock