Reviews Rockler Rail Coping Sled

Router Table Coping Sled, Rail Guide Safety Coping Sled Router Table Tenoning Safety Pushing Clamp for Cutting Precise Joints for Cabinet Door Drawer Fronts Carpenters Woodpeckers Woodworking Tools

  • Clear Acrylic Fence: Our coping sled uses the fence as a reference instead. The rail guide coping sled features a clear acrylic fence for reference which is offset and raised 2″ above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place..
  • How It Works: Hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
Check Stock

Rockler Rail Coping Sled for Router Table – Round Handle Router Sled for Firm Grip – Toggle Clamp Features Easy Tool-Free Adjustments - Maximum Workpiece Dimension 5” Wide x 1-1/4” - Router Jigs

  • Coping Sled For Router Table: If you're building cope-and-stick doors and drawer fronts, our new rail coping wood sled will be an indispensable....
  • Smooth-Running Sled: With its smooth-sliding phenolic base, and sturdy toggle clamp holding your stock firmly against the router fence, your rails....
  • Keeps Your Hands Safe: Particularly with drawer fronts, which sometimes use very narrow rails, the rail guide coping sled prevents parts from dipping....
  • Prevent End grain Blowout: A sacrificial block can be attached to the fence to prevent end grain blowout, while an abrasive strip prevents the....
  • What’s Included? Our router table woodworking kit includes a Sled Base, Fixed Fence, Adjustable Fence, Lever Clamp, Sacrificial Piece, Front Handle,....
Check Stock

Woodpeckers Iron-Grip Coping Sled For Router Table, Precision Woodworking Tools

  • UPGRADED COPING SLED – The Iton-Grip Coping Sled improves on our ever-popular original Coping Sled and beefs it up with a stiffer base, larger fence guide and the Iron-Grip clamp..
  • CRYSTAL CLEAR FENCE – It is 3/8″ thick and 15-1/2″ long, making it ideal to work with any router table fence, whether it’s a Woodpeckers fence, another brand or one you’ve built yourself…it handles them all..
  • NEWLY DESIGNED BACK FENCE – It has a T-slot to mount a sacrificial backer. The backer prevents blow-out where the router bit exits your stock. Just chop the end off and slide the piece forward when you change projects. You’ll get three MDF backer boards with your Iron-Grip. When they’re gone you can make your own from scraps or we offer them in convenient 3-packs..
  • MADE IN USA – Like all Woodpecker products, the Iron-Grip Coping Sled is precisely machined and carefully inspected in our Strongsville, Ohio, manufacturing facility..
Check Stock

IRWIN Tools Coping Saw Blades, Coarse, 3-pack (2014500)

  • Designed for use with your existing ProTouch coping saw.
  • Replace damaged or worn-out coping saw blades.
  • These coarse coping saw blades have a tooth count of 17 pt..
  • Use a coping saw for cutting the curved profile on crown, base or chair-rail molding.
Check Stock

Rockler Clamp-It Corner Clamp Jig - Glass-Filled Polycarbonate Woodworking Clamps - Corner Clamps to Hold Panel Parts Together - Right Angle Clamp for Fastening Work - Woodworking Tools

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Rockler 45 Degree Miter Sled for Table Saw - Miter Saw Sled Ensures Durability & Low-Friction Sliding - Table Saw Accessories Fits Standard 3/8\ x 3/4\ Miter Slot – Fence Accessories

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

FOXBC Coping Saw Blades, 6-1/2 Inch, Coarse, 18 TPI - 10 Pack

  • Designed for use with your existing ProTouch coping saw.
  • Replace damaged or worn-out coping saw blades.
  • These coarse coping saw blades have a tooth count of 18 pt..
  • Use a coping saw for cutting the curved profile on crown, base or chair-rail molding.
Check Stock

Rockler Speed-Cope Crown Molding Jig - Requires Power Jig Saw for Use – This Crown Molding Tool adjusts to handle most molding up to 7-1/4 wide 45° & 90° Inside Miters Flat Miters & More - Power Tools

  • Speed-Cope Crown Molding Jig: The Rockler Crown molding cutting jig lets you make tricky cope cuts with ease, for perfect molding faster. Our....
  • Power Jigsaw Required: The Rockler crown moulding corners Speed-Cope jig does require a power jigsaw for use. Package Includes: The crown molding tool....
  • Perfect Molding Faster: Cut crown and base molding the easy way with this innovative crown molding jig for the miter saw. The Speed-Cope will help....
  • Adjust To Handle: Our crown molding woodworking tool adjusts to handle most molding up to 7-1/4" wide, 45° and 90° inside miters, flat miters, and....
  • Easy To Assemble: This coping saw for woodworking is easy to assemble and designed to work with bosch blade # (T 119B0) best, or for softwood (T....
Check Stock

Rockler 422866 Router Table Box Joint Jig

  • Fence constructed from MDF with low-friction melamine coating for easy sliding.
  • Precision-machined solid brass indexing keys ensure uniform finger spacing and airtight fit.
  • Cuts 6mm (1/4 Inch), 10 mm (3/8 Inch) and 13 mm (1/2 Inch) box joints on a router table.
  • Smooth-sliding sled features long skis that keep it square to the bit.
  • Ideal for creating coping joints for small and medium boxes and frames.
Check Stock

3-1/2\ To 4-1/2\ Universal Fence Clamp 2 Pack

  • Our 525 Large Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 10" wide. Heavy duty 1/2" phenolic base (15-3/4" x 15-3/4") will not distort from clamp pressure..
  • Features one 500 lb. Outboard Toggle Clamp and two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 24” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock