Reviews Rocket Engine Pressure Relief Valve

Motorcraft FL1AB12 Oil Filter

  • Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.
  • Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine.
  • Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.
  • Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust.
  • Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles.
Check Stock

Motorcraft FL1HP Oil Filter

  • Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.
  • Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine.
  • Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.
  • Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust.
  • Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles.
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • The ROP Shop replacement 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500.
  • Specs - Maximum Pressure: 2400 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8". 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
Check Stock

Genuine OEM Toyota Oil Filter 90915-YZZD3 (4PK) with DIINGO Plug Oil Drain Gasket 90430-12031 (4PK) Fit for 4Runner FJ Cruiser Land Cruiser Sequoia Tacoma Tundra

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

PPE 50-STAGE LEGAL Replacement Fuel Valve 113073000 & Viton O-Ring 113073001 Compatible with 2004.5-2010 GM 6.6 LLY/LBZ/LMM Duramax & 2007.5-2018 Ram 6.7 Diesel

  • California Air Resources Board Executive Order Number: D-701-12.
  • The PPE Replacement Fuel Valve (heat-treated stainless steel) replaces stock or a shimmed pressure relief valve. This valve helps maintain fuel rail pressure during high engine load conditions. It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient pressure relief valve spring pressure opening, returning fuel to the fuel tank..
  • Fitment: 2004.5-2010 GM 6.6L Duramax Diesel | 2007.5-2018 Dodge Ram 6.7L Diesel.
Check Stock

Mamiko 04152-YZZA1 Oil Filter Kit (3Pcs) and 90430-12031 Oil Drain Plug Gaskets (10 Pcs) Compatible with Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h Replacement

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

GXP Fuel Rail Plug Compatible with 2003-2007 Dodge Ram 5.9 Cummins Diesel 2500 3500

  • The GXP fuel rail plug for your 03-07 Dodge 5.9L Cummins is designed to block-off your factory pressure relief valve found on your 5.9L Cummins. This....
  • Improves Engine Starting | Easily Replaces Stock Valve.
  • Prevents Low Fuel Rail Pressure | Seals In 30,000 PSI Rail Pressure.
  • Eliminates P0148, P0192, P0087 DTC Codes | Replaces OE Part# 3947799, 1-110-010-029.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

Universal Car Turbo Charger Manual Boost Controller 1-30 PSI Manual Adjustable Boost Controller - Black

  • Material: The turbocharger pressure regulating valve is made of high-quality aluminum, and the surface is anodized, which is not easy to rust, high temperature resistant, durability and practicality and long service life.
  • Easy to install: It is easy to install, cut the turbo vacuum tube, install the tee, one end of the controller is connected to the vacuum tube, and the other end is connected to the pressure relief valve.
  • Function: The pressure regulator valve adjusts air pressure, improves engine performance and reduces fuel consumption. When the turbine starts, an extremely high pressure is generated inside.
  • Scope of application: Suitable for most turbocharged and supercharged cars.
  • Customer Service: If you are unsure about our products, please contact us through Buyer Information. We will provide you with a solution within 24 hours..
Check Stock

EVIL ENERGY 10AN Baffled Oil Catch Can,Oil Breather Tank with Valve,750ML Universal Aluminum Black

  • [Size] Breather catch can volume:750ML,The Fittings thread size of 10an is 7/8-14 UNF,Bottom pressure relief valve thread is 3/8 NPT..
  • [Universal]It can be applied to most cars, making sure there's enough room for Installation..
  • [Drain Valve] A drain valve at the bottom of the oil catch can makes it easier to clean and reuse..
  • [Function]Separates oil particles from PCV/CCV air to prevent intake valve gunk accumulation, keep engine clean, 10AN oil catch can keep your engine....
  • [Warranty] EVIL ENERGY provide this product 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message..
Check Stock