Reviews Road Cutting Machine

YIYIBYUS Air Cooled Crude Oil Engine 247cc 4 Stroke Single Cylinder 3600r / min Machine Set,247CC 4-stroke Tiller Crude Oil Engine Single Cylinder Air-cooled Motor Air Cooled

  • 【Direct injection fuel system】Good atomization, low fuel consumption and accurate fuel injection.
  • 【Speed control handle】It can be positioned at any speed, equipped with throttle cable mounting seat, and can install throttle cable according to needs..
  • 【Aluminum alloy box】Strengthen thickening, heat dissipation fast, low oil temperature, light weight..
  • 【Application scope】road cutting machine, grinding machine, water pump, micro tiller, air conditioning compressor, micro tiller, etc.
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Invisible Man

  • A small investment can make a huge improvement in the cutting performance of your machine.
  • Getting the best cutting performance from your Prestige Pro machine can be as simple as changing the PR standard cutting pad.
  • This PR Standard Cutting Pad measures 9 7/8" x 18"..
  • The many significant advantages of the extended length of this PVC vinyl Cutting Pad are an increased work surface, the ability to shuttle multiple dies through the machine for quicker cutting and for easy registration of ClearCrop Dies..
  • Cutting pads need replacement generally after 4-6 months.
Check Stock

Cuttlebug Cutting Plate B 6'X13'-

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting..
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

We-buys Cutting Dies C Plate Replacement Adapter Mat Clear 5.9'×7.6'

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting.Plate thickness is 3mm.
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

  • ... 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
  • 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable for road cutting machine, grinder, water pump, microtiller, air conditioner compressor, microtiller, etc. Packing list:Screw driver + 14-17mm wrench + connecting plate set screw + fixed key + screw gasket + and a 10-12mm wrench+Diesel engine..
Check Stock

Air Loc Tube 31X1050R15 31X10.50R15 265/75R15 15 RADIAL TRUCK TIRE INNER TUBE HEAVY DUTY

  • Sedona Tire & Wheel builds products for today's modern ATVs, UTVs / side-by-sides, and off-road motorcycles that offer high-quality, cutting edge....
  • By working with one of the largest automotive tire factories in the world, Sedona Tire & Wheel jointly develops its tires through meticulous research....
  • At Sedona Tire & Wheel they like to push the boundaries to find the ultimate ride for your machine.8-ply puncture-resistant radial.Aggressive tread....
Check Stock

OKVEQUIP 3PCS 4Inch Super Thin Diamond Saw Blade Dry or Wet Tile Ceramic Disc Wheel Porcelain Cutting Discs for Marble Quartz Granite

  • 【Tile Blade Widely Use】: Ceramic tile blade cutting discs can cut porcelain, vitrified tiles, ceramic tiles and thinner granite, marble, etc. quickly and accurately..
  • 【Features】: Diamond tile blade fast cutting, small kerf, low power consumption, sharp and wear-resistant,using hot pressing sintering process, can be used for a long time.
  • 【Applicable type】：Concrete cutting machine saw blade can be used for dry/wet cutting.
  • 【Adapted machine】: Cutting marble granite porcelain tile can be used with marble machine, desktop cutting machine, angle grinder.
  • 【Ceramic cutting disc wheel parameters】: size 105x20x10MM, outer diameter 105MM, inner diameter 20MM, with washer to change 16MM, thickness 1.2MM, RPM2000-8000.
Check Stock

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

YESWELDER CT2050 TIG Welder/Cutter/Stick Welder Wide Voltage Multiprocess Welder

  • Multi-Process :Capable of AC/DC TIG, AC/DC Pulse TIG, Stick, Cut with built-in and external air compressor into one lightweight package..
  • Wide Voltage:Allows the machine to run directly on 96-265V 50/60 Hz power. No worry for not having the suitable power..
  • Power Factor Correction Technology:Multiple advantages such as energy saving and wider input voltage. Works with 96-265V..
  • Remote Control Available:Pedal remote and welding torch remote control are available in foot pedal torch operation mode(Foot pedal is not included)..
  • Alternative Choice for Air Compressor:The CT2050 comes with a built-in compressor, making it easy to take on various outdoor projects, and making life for welders on the road that much easier. It’s able to start cutting without an extra air compressor..
Check Stock