Reviews Rmr Scopes

Swampfox Hostile Engagement Mount 30 mm Tube Twin Optic (LPVO and RMR Red Dot) 45 Degree Offset Reflex Sight Mount 1.6" H

  • Do you like rings but greatly prefer the stability of a unified mounting option? If so, Hostile Engagement Mount is right for you.
  • This mount provides the option of moving the optic up to 2” beyond the edge of a Picatinny rail.
  • This is a superb choice for generous eye relief scopes.
  • The Tomahawk and Arrowhead come to mind, although it will work with well with any 30mm tube Low Power Variable Optic (LPVO).
  • The entire mount is made from super strong 7075 –T6 Aluminum and is finished in a Matte Black hardcoat anodize.
  • To ensure it stays stable and secure T25 torx bolts are used instead of thumb nuts.
  • These along with integrated recoil lugs ensure everything stays exactly where you left it.
  • One mount with two optics to handle threats near and far with only a tilt of the wrist.
  • As if that wasn’t enough, we added a built in RMR footprint, 45° mount for use with an offset back up red dot.
  • Kingslayer, Liberty or Justice would all mount up easily with 6x32 bolts.
Check Stock

Ade Advanced Optics RD3-023 Valkyrie 4 MOA Green Dot Sight for Optics Ready Pistol That is Compatible with RMR fooprint Optics Such as Holosun HS407C/HS507C/HS507T and Riton X3 Tactix PRD.…

  • ADE RD3-023 Valkyrie is a 4 MOA GREEN dot designed to fit any pistol with a PISTOL that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots. The Valkyrie fits all pistol with optic cuts for Trijicon RMR/SRO, including aftermarket slide such as Rockslides, Polymer80 that has a optic cut for Trijicon RMR/SRO..
  • The Valkyrie Gen 2 also fits name brand pistol manufacturer made Optics Ready pistols, such as Glock MOS, S&W M&P 2.0 OP, IWI Masada, Smith Wesson MP C.O.R.E, CZ P10F/10C optics ready, Walther Q5 Match and Springfield XD/XDM/XDS OSP, Canik TP9 SFX/Combat, FN 509/45 Tactical, Shadow Systems MR 920 using pistol manufacturer provided plate marked for Trijicon RMR footprint..
  • Those name brand pistol manufacturer made "Optics Ready" handguns all come with several mounting plates/optic cuts marked for different brands of red dots, such as for Trijicon RMR, Shield RMS and Vortex Venom red dot footprint. The Valkyrie fits one of the pistol manufacturer provided plate marked that is compatible with Trijicon RMR..
  • ADE Valkyrie created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a "back up iron sight" to give enough distance to be a Co-Witness back up sig....
Check Stock

DPP Titanium Red Dot Mount/Plate/Adapter Compatible with Springfield XD Trijicon RMR/SRO&Holosun 407C/507C/508T

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock

Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Trijicon RMR ADE Stingray Holosun HS407C/HS507C/HS508T Red Dot Sight…

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock

UTG Super Slim RMR Mount 2 in 1 Combo Picatinny

  • Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum with Weight Reducing Lightening Cuts, and Finished in a Matte Black Anodize.
  • 0.87" Height Mount Positions RMR at the Correct Height for an Absolute Co-witness in line with Standard Height AR Iron Sights.
  • Low Profile 0.40" Height Mount Positions RMR at a Low Enough Height for Most Shotguns and Rifles with Traditional Stocks Not in Line with the Bore.
  • Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stops for a Secure Zero Hold on Any Picatinny Rail.
  • Includes RMR Mounting Screws and Installation Tools for a Simple and Friendly Installation.
Check Stock

RMR Brands Complete Mold Killer & Stain Remover Bundle - Mold and Mildew Prevention Kit, Disinfectant Spray, Mold and Mildew Stain Remover, Includes 2 - 32 Ounce Bottles

  • TWO FAST-ACTING FORMULAS: The ultimate mold prevention kit, our bundle includes 1 spray bottle of RMR-86 and 1 spray bottle of RMR-141 RTU to kill mold and mildew instantly while lifting difficult stains that are left behind.
  • KILL MOLD AND MILDEW INSTANTLY: Our RMR-141 Disinfectant Spray Cleaner and Fungicide kills harmful molds and mildews, and prevents regrowth by completely eliminating the roots that other sprays often leave behind.
  • REMOVE STUBBORN STAINS IN SECONDS: Our RMR-86 Instant Mold & Mildew Stain Remover begins working immediately to target stubborn stains that linger on surfaces and hard-to-reach areas.
  • NO SCRUBBING NEEDED: Simply spray our ready-to-use formulas on the affected area and watch the mold and mildew disappear right before your eyes!.
  • SAFE TO USE ON MULTIPLE SURFACES: Use this powerful duo on wood decks, concrete floors, brick walls, carpeted areas, kitchen tiles, and any space where mold and mildew tend to grow.
Check Stock

Tactical Area Hunting Rear Sight Glok Plate Base Mount Universal Red Dot Sight Optics Sight Mount Glok Plate Base Kits

  • FEATURES: Universal optics mount for most proliferated sites in the field. Super low-profile. Ability to use an optic without cutting your slide..
  • DESIGN: The mount itself is secured to the slide via the dovetail with 6 set screws..
  • NOTE: Fits for all Models Except 42/43. The pins for the RMR red dot only fit for the original RMR. But it can also install well on the replica RMR....
Check Stock

DPP Titanium Dovetail Mount Compatible with Springfield XD Holosun 407K/507K,Shield RMS,Romeo Zero

  • Precision CNC Machined from Aircraft Grade Aluminum.
  • It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most....
  • Designed to use on ADE RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO red dots..
  • Compatible with Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight.
  • Finished in a Matte Black Anodize. Comes with two screws to connect this ADE optic plate to Trijicon RMR..
Check Stock

Sheriff Chancy Rosman: A Chancy Rosman Western Adventure - Book 1

  • 3.25 MOA ADJUSTABLE LED RMR: Features an automatic brightness mode and easy push buttons for eight adjustable brightness settings including 2 nv and 1 Super bright.
  • DEPENDABLE ELECTRONIC DESIGN: Ruggedized Battery contacts and electronics ensure performance and survivability in harsh environments.
  • UNIQUE PATENTED HOUSING SHAPE: Military-grade aluminum alloy forged housing shape diverts force of impact away from the lens, greatly increasing its durability.
  • BATTERY CONSERVATION MODE: Automatically adjusts aiming dot to ambient lighting conditions after 16.5 hours. Battery Life- Over 4 years of continuous use (When used at 70ºF (21ºC))at setting 4 of 8. Extreme temperatures (high or low) will affect lithium battery performance.
  • BUTTON LOCKOUT: Sets RMR into automatic mode to prevent accidental adjustments. The Trijicon RMR Type 2 is tougher than any alternative and suitable for military, law enforcement and hunting applications.
Check Stock

DPP Titanium Mounting kit/Plate/Adapter Compatible with Glock Trijicon RMR/SRO&Holosun 407C/507C/508T Titanium

  • Precision CNC Machined from 6AL4V aerospace grade Titanium with black finish..
  • Hard As Steel but 45% lighter than steel.Ultra Low Profile and lightweight..
  • Compatible with Trijicon RMR/SRO and Holosun 407C/507C/508T.One Piece Design for a Secure Zero Hold,Easy to install.*NOT FIT THE FAKE TRIJICON RMR.
  • 100% MONEY-BACK warranty within 30 days of purchase*NO QUESTIONS ASKED. LIFETIME WARRANTY.
  • The kit includes 1X mount plate, 1X regular sealing plate,1X anti-flicker sealing plate, 3X RMR Screws (short),3X socket set screws and 1X Hex Key..
Check Stock