Reviews Rip Saws
CMT P10042W ITK Plus General Purpose Saw Blade cutting kit with 10-1/4\ x 42 Teeth, 10 degree ATB/Shear with 5/8\ Bore
- Special Carbide prevents material failure, Non-Stick Orange Shield protects against corrosion..
- For excellent rip and crosscuts on wood and plywood. Fast rip cut with high precision!.
- For use with radial arm saws, miter saws and table saws for cutting soft/hardwood and plywood..
- 0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 10° ATB+Shear grind..
- Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
Check StockBORA 4-piece NGX Compact Set
- Includes 24" NGX clamp edge, 25" NGX clamp edge extension with connectors, rip handle, saw plate.
- Made of heavy-gauge, rigid aluminum for extreme durability.
- For use with circular saws, routers, jig saws, and other portable power tools to achieve track saw like cuts.
- Can be used on right- or left-handed circular saws — no tools necessary to switch.
Check StockKAKURI Azebiki Japanese Saw for Woodworking 3-1/2" Made in JAPAN, Japanese Curved Hand Pull Saw for Hole, Mid Panel, Groove Cutting, Ryoba Double Edge Blade for Rip & Crosscut
- JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
- UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
- RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
- RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
- PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", ....
Check StockCMT P10050 ITK Plus Combination Saw Blade, 10 x 50 Teeth, 1FTG+ 4ATB Teeth with Shear with 5/8-Inch bore
- for rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance..
- Use on radial arm saws, miter saws, circular saws, table saws for cutting soft/hardwood & plywood..
- 0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 1 Flat and 4 Alternate Teeth grind..
- Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
- Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check StockCMT 201.030.12 12\ x 30 Tooth FTG, .126 Kerf, 1\ Bore Table Saw Ripping Blade
- For for fast, smooth, heavy-duty rip cuts on soft/hardwood. Good performance on plywood..
- To be used on radial arm saws, miter saws, table and special saws..
- 0.126 kerf thickness, 0.087 plate thickness, 20° hook angle, FTG-Flat Top Grind..
- Micrograin carbide teeth to last longer and deliver smooth cuts..
- Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion..
Check StockCMT P10024 ITK Plus Ripping Saw Blade, 10 x 24 Teeth, 10° ATB+Shear with 5/8-Inch bore
- For fast and excellent rip cuts thanks to the shear angle design..
- Use on radial arm saws, miter saws, table saws for cutting soft and hardwood..
- 0.094 kerf thickness, 0.063 plate thickness, 20° cutting angle, 10° ATB+Shear grind..
- Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
- Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check StockBora 36\ NGX Clamp Edge 544036
- Clamping end moves with handle for easy adjustability from one side.
- Locking handle grabs work surfaces for secure grip that won’t budge.
- 30 inch cutting capacity. Easily increase length with 50 inch extension.
- Made of heavy-gauge, rigid aluminum for extreme durability.
- Use with circular saws, routers, jig saws, and other portable power tools.
- Part of entire NGX Clamp Edge System to cut and rip sheets and boards.
Check StockDEWALT Circular Saw Fence (DW3278)
- Rip fence for use with DEWALT circular saws including models DWE575, DWE575SB, DWE364, DWS535, DW384.
- simple to fasten and designate distance from blade to fence.
- Easy attaching by inserting through slots at front of shoe and tightening screw.
- Ruggedly crafted from all metal for long life.
- Note: This item is not compatible with ALL DEWALT circular saws..
Check StockBora 24\ NGX Clamp Edge 544024
- Clamping end moves with handle for easy adjustability from one side.
- Locking handle grabs work surfaces for secure grip that won’t budge.
- 24 inch cutting capacity. Easily increase length with 50 inch extension.
- Made of heavy-gauge, rigid aluminum for extreme durability.
- Use with circular saws, routers, jig saws, and other portable power tools.
- Part of entire NGX Clamp Edge System to cut and rip sheets and boards.
Check StockMICROJIG Deflector/Connector for GRR-RIPPER and GRR-RIP BLOCK Pushblocks
- GRR-RIPPER/GRR-RIP BLOCK Accessory for additional chip deflection and lose debris protection.
- Add incredible protection to Table Saws and Router Tables.
- GRR-RIPPER Handle Bridge Kit accessory necessary for GRR-RIPPER use.
- No additional accessories needed for GRR-RIP BLOCK.
- Use it to connect two GRR-RIP BLOCKs for handling larger material.
Check Stock