Reviews Rip Saw Machinery - BestBuyersPro.com

Delmar Tools Patented Push Block For Table Saws, Makes Narrow Rip Cuts Safe And Easy, Helps Prevent Kickback

PATENTED PUSHBLOCK MAKES NARROW RIP CUTS ON THE TABLE SAW SAFER AND EASIER TO CONTROL- Make your table saw rip cuts down to a 1/4" wide smooth, easy, and safe! The Delmar Tools patent pending push block creates an adjustable width tunnel for the table saw blade to pass through under the push block on difficult narrow rip cuts as small as 1/4”. Gain complete control of both side of stock on your rip cuts.Helps reduce kickback while keeping your hands above and away from the saw blade..
THE BEST TOOL FOR EFFECTIVELY RIPPING THIN STOCK ON THE TABLE SAW- Unlike cumbersome push sticks and feaher boards, this push block design distributes even and accurate pressure to both sides of the stock for fluid rip cuts. This push block grips both side of the stock and guides it through the table saw cut while safely keeping your fingers and hands out of the way. Eliminates those dangerous close calls with your fingers by the saw blade on narrow rip cuts!.
USER FRIENDLY ADJUSTMENTS TO SET UP EACH RIP CUT- Adjustable center leg is easily adjusted by rolling a wheel with your thumb to set up different width cuts. Innovative balance wheel is deployed via a button to deliver stability on narrow cuts. No annoying thumbscrews that have to be loosened and tightened for eac....

PRECISE RIP CUTS AND CROSSCUTS: Get straight accurate rip cuts and crosscuts up to 24 inches (610mm) wide on the sheet material you are breaking down..
REPEATABLE ACCURACY: The Bora Rip guide allows you to make repetitive rip cuts and crosscuts, while improving your accuracy and saving you time..
SAVE TIME: The Rip Guide by BORA will eliminate the need for marking and measuring each cut. Lock in your measurement and saw for accurate cuts every....
EASY SETUP: Three simple steps and your Rip Guide is set up! The Saw Plate stop allows you to quickly setup your saw every time..
STABILITY: Large ergonomic Rip Guide handle ensures a solid grip. The aluminum rail attaches securely to the Saw Plate for confident cuts..

【Powerful Cutting Performance】Equipped with high-power 15 Amp motor in low noise, this table saw delivers 5,000 RPM cutting performance to rip through various kind of hardwood with ease. And the heavy-duty table saw stand effectively prevents table from rollover during cutting..
【36 Tooth Blade & Aluminum Tabletop】Coated alumium tabletop with 26" rip capacity can easily rip through larger wood material and reduce extra friction for smoother sliding. Table saw features36T carbide-tipped blade, which is designed with transparent guard and riving knife to protect you from accidental hurt and flying chips..
【Double Bevel Cutting & Adjustable Height】Featuring the double bevel cutting from 0-45°, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2". And portable table saw has a large hand wheel to control the blade lifting, convenient for different needs, such as slotting, ripping or cutting..
【Miter Gauge & Rip Fence】Sliding miter gauge can be adjusted from -45° to 45° for cross cutting. And self-aligning rip fence with parallel guide on both sides assists the more precise and stable cutting without any wobbling..
【Ergonomic Benchtop Table Saw】On-board storage system is convenient for your wrench and p....

Turn Power Pad on the Rip Saw & Dune Buggy to pop out the saw arm!.
Remove the saw blade disk from the arm, load a projectile – and fire!.
Buggy hatch opens & closes so Cyborg can jump in and "steer" the action!.
Includes Rip Saw Buggy, Cyborg figure and 2 projectiles.
Collect more vehicles and figures in the Imaginext DC Super Friends collection to rev up the crime-fighting adventures! (Each sold separately and subject to availability).

PATENTED PUSHBLOCK MAKES NARROW RIP CUTS ON THE TABLE SAW SAFER AND EASIER TO CONTROL- Make your table saw rip cuts down to a 1/4" wide smooth, easy,....
THE BEST TOOL FOR EFFECTIVELY RIPPING THIN STOCK ON THE TABLE SAW- Unlike cumbersome push sticks and feaher boards, this push block design distributes....
USER FRIENDLY ADJUSTMENTS TO SET UP EACH RIP CUT- Adjustable center leg is easily adjusted by rolling a wheel with your thumb to set up different....
COMES FULLY ASSEMBLED, NO INSTALLATION NECESSARY- Arrives ready to go right out of the box, no frustrating assembly required. Other push blocks....
LIFETIME WARRANTY- Delmar Tools includes a lifetime warranty on this pushblock. Any issues down the line and you will be covered for a free....

JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.

Bundle of: (2) Sedona Rip Saw R/T (6ply) ATV Tire [26x9-14] + (2) Sedona Rip Saw R/T (6ply) ATV Tire [26x11-14].

Bundle of: (2) Sedona Rip Saw R/T (6ply) ATV Tire [26x9-12] + (2) Sedona Rip Saw R/T (6ply) ATV Tire [26x11-12].

Bundle of: (2) Sedona Rip Saw R/T (6ply) ATV Tire [25x8-12] + (2) Sedona Rip Saw R/T (6ply) ATV Tire [25x10-12].

Easy & Quick Change of Blade. The 24 teeth wood saw blade and the 60 teeth metal saw blade could be changed with the Allen key easily and quickly..
Laser Guide & Bevel Level. The laser guide helps cut a straight line accurately. The bevel lever allows you to set cutting angle up to 45 degrees, max cutting depth is 1-11/16" (at 90°) and 1-1/8" (at 45°)..
Clean & Safe. Dust port vacuum adapter keeps cutting area clear out of wood debris.
Lock-off Switch prevents the machine from accidentally starting up..
Ergonomic Design. Soft rubber handles designs to comfortably fit in hand for improved control with minimal vibration.
laser guide and rip guide for precise cutting..
What You Get. 1* Mini Circular Saw (with Battery), 1* 24T TCT Saw Blade, 1* 60T HSS Saw Blade, 1* Charger, 1* Allen Key, 1* Rip Guide, 1* Vacuum Adapter, 1* User Manual..