Reviews Rigid Bar Led

iJDMTOY 2-Pack Universal Side Mounting Brackets Compatible with Straight or Curved LED Light Bar (Most 20 30 40 42 50 52 Inches)

  • 2-pack set of universal fit side mounting brackets (come with screws, nuts, accessories to install these brackets).
  • Unlike most other brackets on the market come with smaller M6 holes, our bracket's holes are all M8 (5/16"), so they are good for more varieties of LED light bars ranging from M6 (1/4") to M8 (5/16") screws.
  • Compatible with most Single-Row LED light bars on the market (Good for both straight or curved LED light bar up to 51.5" 250W).
  • 360-degree rotation, allows you to adjust the angle freely.
  • Good for most LED light bar brands such as iJDMTOY Off-Road, Rough Country, Rigid Industries, Auxbeam, Nilight, etc.
Check Stock

RIGID 270413 Adapt E-Series Led Light Bar 30 Inch - Has Built in GPS Guided Adapt Mode Lighting or All On 3 Optic Zones - Scene, Driving, Spot Beams.

  • The RIGID Adapt E-Series LED Light Bar features the same style and construction as RIGIDs legendary E-Series, from the high-strength aluminum heat sink to the unbreakable polycarbonate lens. On the inside, however, the Adapt E-Series contains cutting-edge technology. The Adapt E-Series takes off-road lighting performance to a whole new level with two layers of adaptive response to your vehicle and driving conditions.
  • RIGIDs new Active Power Management (APM) system which continuously monitors input voltage to determine the status of the vehicles electrical system. If the voltage is stable, the Adapt E-Series will continue to utilize all available power to give you the most output possible. If the available voltage to the light begins to drop due to insufficient power, RIGIDs APM system will gradually reduce the lights power consumption until the vehicles voltage stabilizes.
  • The second layer of adaptive response featured in the Adapt E-Series is RIGIDs proven Active View Technology. This technology uses an internal GPS module to determine the vehicles speed, allowing the Adapt E-Series to properly distribute all available power among three unique optic zones. Utilizing the three zones allows the Active View Technology to create the most optimal beam patt....
Check Stock

Yahboom LED Strip Light Programmable WS2812 DC 5V PH2.0 RGB Full Color-Driven Compatible with Raspberry Pi Pico Arduino Microbit STM32 ESP32 5 Bit 4PCS 14 Bit 2PCS

  • 【Full color, high brightness】 The brightness of the lamp beads of the light bar module can be controlled individually, the brightness range can be adjusted from 0-255, and different colors can be customized according to needs.
  • 【Programmable, widely used】 Compatible with most development boards, such as: raspberry pi, arduino, Microbit, STM32, ESP32, etc. Widely used in programmable DIY robot projects, electronic experiments, LED decorative lights, full-color modules, full-color flexible light strips, indoor and outdoor LED video irregular screens..
  • 【Cascade of 5 LEDs】The 5 LED strips provide 7.5cm cable and 20cm cable, which can be connected end to end to form a longer strip. The decoration around the DIY trolley is colorful.
  • 【Material Soft and Hard Available】The light bar with 14 lamp beads is a flexible FPCB, which can be freely bent into the shape you want to match the installation location. The light bar of the 5 lamp beads is a rigid PCB, which can maintain a straight shape.
Check Stock

LightBoss 20 Inch Slim LED Light Bar for Truck 180W 12000lm, 12V 24V 36V 48V Off-Roading Driving Working, Pickup ATV UTV Car RV Rack Bumper Jeep Marine Backup Fog Lights, 1PCS, White Beam

  • ✅[Slim Design ] depth and height less than 2inch, Lightboss 20in length slimline LED light bars fit more harsh mounting demand like the front grill of a small space.
  • ✅[More Brightness ] Upgraded from single row LED light bars, Lightboss 2 rows light bar provides you more brightness with similar price.
  • ✅ Fit vehicles/ equipments 12V 24V 36V 48V 60V. Especially perform more stable than regular 24V light bars on trucks.
  • ✅ [Rigid & Solid Built ] With high-quality profile aluminum extrusion housing, 98% transparent PC lens, latest sealing technology, Lightboss slimline LED bar lights meet the standard of IP67 waterproof rating.
  • ✅[Wide Application ] Besides of driving lights, work lights, backup reverse lights & tail lights, and truck bed lights, the stainless steel brackets also permit the LED bars to work as marine/boat lights without rusting..
Check Stock

RIGID 901802 Chase Rear Facing 27 Mode 5 Color LED Light Bar 28 Inch, Surface Mount

  • RIGID introduces the world’s most advanced Rear Facing Chase Light Bar. The Chase Bar is a rear facing LED light that adds safety and functionality to any UTV, rail, buggy, Jeep, or other off-road vehicle by combining running, brake, reverse, turn signal, and more into a single compact package. Pre-programmed features include strobe, scroll, flash, and all on and can be fully customized to any vehicle trigger.
  • Race Compliant For Series Requiring Strobing Blue, Amber, Green And Red.
  • Supports Running, Brake, Reverse, And Turn Signal Functions.
  • Horizontal Surface Mount Kit With 15 Degree Adjustment | Pair.
Check Stock

Lightboss 7 Inch Slim LED Light Bar 60W 6000lm 12V-60V for Truck ATV UTV Jeep Boat Golf Cart Land Mower Trailer Car Off-Road Driving Fog Pods, Rack Front Bumper Grille Waterproof Bar,1PC, White Beam

  • ✅[Slim Design ] Lightboss 7-in slimline LED light bars can be easily mounted in small space like truck front/ behind grill as auxiliary lights or rear lights.
  • ✅[More Brightness ] Upgraded from single row thin LED light bars 18W (6 LEDs), Lightboss 60W (20 LEDs) 2 rows light bar provides you more brightness with similar price.
  • ✅ Fit vehicles/ equipments 12V 24V 36V 48V 60V. Especially perform more stable than regular 24V light bars on trucks.
  • ✅[Rigid & Solid Built ] With high-quality 6inch low profile aluminum extrusion housing, 98% transparent PC lens, latest sealing technology, Lightboss Slimline LED bar lights meet the standard of IP67 waterproof rating.
  • ✅[Wide Application ] Besides of driving lights, work lights, backup reverse lights, tail lights, and truck bed lights, the stainless steel brackets also permit the LED bars to work as marine/boat lights without rusting..
Check Stock

GTINTHEBOX 4PCS Heavy Duty Waterproof 2-Pin Deutsch DT DTP Male/Female Adapters Plug Connectors Pigtails, Good for Cubic LED Pod Lights, LED Light Bar, LED Work Lamps, Fog Lights, DRL, etc

  • ✔ Good for converting conventional fog lights to LED pod light, LED work light, LED light bar and LED DRL, etc.
  • ✔ Male/Female Deutsch DT Series 2-pin connectors with pigtail wiring, compatible with most LED pod lights, LED light bars on the market including Rigid Industries, RC, Putco, Vision X, etc.
  • ✔ Quantity: 4PCS (approx length: 10") with waterproof male/female IP68 Deutsch adapters.
  • Suitable for use in automotive applications: For Harley, John Deer, Caterpillar, Nascar Racing cars etc.
  • ✔ Great for heavy duty installation since you can splice the pigtail wiring accordingly.
  • 2 pin 2-way DT Series, Automotive, Industrial Applications.
  • ✔ Waterproof IP65, shockproof, dustproof, 50000+ hours life-span, ONE YEAR WARRANTY..
Check Stock

UTV INC 2019 + Polaris RZR XP Turbo & Turbo S 10” Single Row Hood Grill Led Light Bar Mounts

  • Fits ALL 2019+ Polaris RZR XP Turbo & Turbo S UTV Models.
  • Keeps Light Bar Hidden And Protected Under The Hood.
  • Fits SINGLE ROW Rigid (or like sized) 10” LED Light Bars.
Check Stock

Black Folding Portable Party Bar with Black Skirt, Storage Shelf, and Carrying Bag - Single Set

  • PARTY BAR (Black Surface) - Black surface & Black skirt for the most formal events or keeping it cool with some simple cocktails.
  • FEATURES: Lightweight, Portable, Rigid Party Bar. Sets up in seconds. Perfect for parties, tailgating, BBQs, catering, and events..
  • DECORATIVE PARTY BAR SKIRTS: 2 skirts included with EACH Party Bar (Black & Hawaiian). Party Bar skirts wrap around the front and sides and attach with pre-installed hook & loop for quick & secure adhesion..
  • DESIGN: Functional design facilitates quick setup and breakdown. Thick storage shelves easily lock onto leg braces for extra storage and rigidity. Everything fits compactly into nylon carrying/storage bag..
  • MATERIALS: Aluminum framing & square fold out legs make Party Bars rigid & lightweight. The bar surface is 9 mm scratch-proof and liquid-resistant MDF w/ melamine laminate..
Check Stock

Ultimate Body Press Wall Mount Doorway Strength Training Pull Up Bar with Angled Ergonomic Bar to Reduce Strain for Doorways 24 to 30 Inches Wide

  • THE MOUNTED DOORWAY BAR: The Wall Mount Doorway Pull Up Bar is the Ultimate Body Press exclusive that combines the space saving versatility of a doorway pull up bar and the rigid performance of a mounted bar for better workouts every day.
  • ALL WELDED STEEL: The rigid mount Doorway Pull Up Bar supports focus on form so you can effectively increase rep counts in 3 grip positions. Thick 1. 25” tubing stands a full 4. 25” off your wall to leverage your doorway for full range of motion.
  • EASY INSTALLATION: The Wall Mount Doorway Pull Up Bar is precision engineered for easy home installation and includes assembly instructions, complete hardware, and USA tech support.
  • IDEAL ANCHOR: Anchor optional Bodyweight Resistance Trainers to turn your pull up bar into a full bodyweight gym. Complete full sets of pull ups and other challenging exercises right from day one with assisted exercise variations. [sold separately].
  • DESIGNED IN THE USA: Ultimate Body Press is a North Carolina company committed to delivering better workouts every day. Includes Prime eligible shipping and USA customer service.
  • SHOP WITH CONFIDENCE: The Wall Mount Doorway Pull Up Bar is backed by Ultimate Body Press against manufacturer's defects for 10 years.
  • NOTE: 36 inch bar AND minimum 38 inch wi....
Check Stock