Reviews Right Angle Brackets

Cabinet Wardrobe Mounting Connectors/Roman Column Connection Corner Buckle/Joining Plate Joint Bracket Plate/Corner Bracket/Panel Mounting Brackets Fasteners Furniture Connectors （4pcs）

  • corner code constructed from high quality ABS plastic. wood connection hardware.
  • easy to install,strong and durable. SCREWS ARE NOT INCLUDED.
  • serve as structural supports for right angle corner joints, corner connected, suitable for chests, screens,wardrobe，wall plates，cabinet, panels，furniture, etc..
  • corner braces - also know as brace corner brackets, right angle bracket, L bracket, angle support brackets.
Check Stock

Antsky 4x4(Actual: 3.5x3.5) 4-Way Right Angle Corner Brackets with Flange Anchor Bases，Stainless Steel Pergola/Gazebo Kit Hardware(2 Pack)

  • Material：304 stainless steel, black finishing；.
  • Actual inner size：3.6×3.6inch（91.5mm）,This size applies to nominal standard 4"x 4" wooden post (actual 3.5"x 3.5" post on market).
  • there is a slight error in the actual size, usually the error is about 1mm.
  • Each angle of corner connector is 90 degrees.
  • This package comes with two 4-way right angle corner brackets, 2 post flange anchors, 80 SS hex screws and 8 SS concrete anchor bolts.
  • This 4-way corner brackets are multi-functional, can be used for building pergola、gazebo，playhouse、tree houses、log cabin and so on；.
  • These 4-way right angle corner brackets and the flange anchors make the installation very simple and easy. It's made of stainless steel, which is very sturdy and anti-rusty. The structure designed for covering the whole end of wood beam, so that the wood won't rot by years of rain and sun..
Check Stock

Flat Corner Braces, 10pcs 4in L Right Angle Braces Brackets, Flat Repair Mending Plates for Wooden Frames Beds Tables Cabinets Chairs, Cold Rolled Steel Joining Support Braces, 33lbs Load Capacity

  • 2INCH BLACK L BRACKETS: 38MM wide design provides great load capacity and is more durable than most stainless angle brackets on the market.
  • Package contains 20pcs 2”x2” Black Angle Brackets, perfect metal angle bracket for wood frame furniture or fence repairs, or as an additional support.
  • HEAVY DUTY ANGLE BRACKET: The internal corner brackets are made of high quality steel with a black finish that is rust and corrosion free and suitable for both indoor and outdoor applications.
  • 90 DEGREE CORNER BRACE SUPPORT: Metal corner brace has smooth surface and round edges for an elegant, scratch-resistant appearance, which won’t scratch your hands after furniture repairing and fixing.
  • RIGHT ANGLE BRACKET SIZE: Overall Size: 2”x1.5”x2”(LxWxH).
  • The 2inch corner bracket has 6 holes with countersunk screw holes for quick installation, and the screw head does not protrude after screwing in.
  • WIDE USED IN HOME DIY PROJECT OR OUTDOOR: 38MM wide corner brace bracket is essential brackets hardware, widely used for stabilize and reinforce wooden furniture and to connect furniture joint corner board, such as shelving planks, bookshelf, wooden fence, table, bed, office desk and wobbly furniture.
Check Stock

L Bracket Corner Braces Joint Right Angle Bracket Fastener Support Shelf Brace with Screws for Furniture Repair Chairs Wooden Shelves DIY Black 16 Sets Elimeta (1inch)

  • Solid and Sturdy: The L corner brace is durable, strong, and don't bend easily. A line of hardware used to reinforce a variety of joints, seams and cracks in commercial and residential settings..
  • Easy to Install: Convenient to use, the bracket braces can be simply fastened with screws. Product design allows for quick and easy repair of general household items or DIY projects..
  • Angle Support Design: The angle brackets are L shaped fastener used to join together two parts at a 90-degree angle, perfect size to reinforce furniture, brace inside of right-angle corner joints..
  • Application: Corner brackets are perfect for bracing the frame, mirror, bathroom shelving project, strengthening chair, bookcases, kitchen drawers, windows, and other furniture which had been flimsy..
  • Package Included: Total 16 pieces of black shelf corner brackets in one pack that you can use for many projects, screws are along with the corner brackets. Size: 1.0x1.0x0.6inch (LXWXT)..
Check Stock

Set of 2 Shelf Brackets 5 7/8 X 7 7/8 Inches Heavy Duty Iron L Brackets with Rust Finish for Shelves Corner Shelf Wall Mount Bracket DIY Kitchen Shelving Right Angle Braces

  • HEAVY DUTY SHELF BRACKETS: These authentically designed corner wall shelf brackets are HANDCRAFTED in IRON and are ADJUSTABLE, so mounting them in either direction can be done makes it easy for you to use according to your convenience. These heavy duty shelf brackets can hold up to 60 lb. These Right Angle L Shelf Brackets can hold up to 6” or 8” deep shelves..
  • DIMENSIONS & WEIGHT CAPACITY: Corner brace shelf bracket having dimensions of the L Brackets are as follows.
  • LENGTH: 5 7/8”, HEIGHT: 7 7/8”, WIDTH: 1 5/8”. Weight capacity per pair: 60 lbs. Sold as a Set of 2. The pack includes screws as well, which will help you secure the L Brackets safely..
  • VARIOUS USAGE: These corner shelf wall mount brackets can be used for decorating your home office or store shelves. These shelf brackets are elegant and sophisticated enough for indoor use while also being tough and durable enough for outdoor use without wear or corrosion. Shelf braces can also be used for mounting cisterns, sinks, roof supports, columns, pillars. and frames giving an extra edge to your decor..
  • CLASSIC QUALITY FINISH: These Right Angle Brackets are Rust finish. This is done to keep away rust & premature wearing, Keeping the shelves look pristine for as long as you need them. ....
Check Stock

40PCS L Bracket Corner Brace Stainless Steel L Brackets for Shelves Metal Corner Bracket Small Right Angle Bracket for Wood Furniture Chair Drawer Cabinet with 80PCS Screws 0.79 x 0.79 inch

  • GREAT VALUE: Vicuna R package includes 40PCS small corner braces for wood and 80PCS screws, very humanized package content, and all screws you needed to install the right angle brackets are included. The 90 degree metal bracket size: 20x20x16mm/0.79x0.79x0.63 inch, hole Dia: 5mm/0.19inch..
  • STURDY AND DURABLE: Vicuna R metal corner brackets for wood are made of high-quality stainless steel, rust-resistant and durable, brushed finish, and no burrs (no razor edge). Counterbore-designed mounting holes ensure the screws do not stand out, giving your furniture an aesthetic look..
  • SUPER EASY TO INSTALL: Vicuna R small l brackets with screws for perfect fit fastening. You just need to drill the hole, install the screw, and use the screwdriver to tighten the screw on it. Simple, easy, and quick. They're great for your DIY projects..
  • WIDELY APPLICATIONS: Vicuna R stainless steel small angle brackets for wood are perfect for reinforcing right angle corner joints in tight spaces, such as a bookcase, chair corner, table leg, bed, cupboard, and even drawers. They're can meet your different needs..
  • EXCELLENT CUSTOMER SERVICE: We take pride in providing the highest quality and most durable metal l brackets for wood on the market. As always, you can enjoy Vicuna R l....
Check Stock

Set of 2 Shelf Brackets 5 7/8 X 7 7/8 Inches Heavy Duty Brass L Brackets with Brass Finish for Shelves Corner Shelf Wall Mount Bracket DIY Kitchen Shelving Right Angle Braces

  • HEAVY DUTY SHELF BRACKETS: These authentically designed corner wall shelf brackets are HANDCRAFTED in BRASS and are ADJUSTABLE, so mounting them in either direction can be done makes it easy for you to use according to your convenience. These heavy duty shelf brackets can hold up to 60 lb. These Right Angle L Shelf Brackets can hold up to 6” or 8” deep shelves..
  • DIMENSIONS & WEIGHT CAPACITY: Corner brace shelf bracket having dimensions of the L Brackets are as follows.
  • LENGTH: 7 7/8”, HEIGHT: 5 7/8”, WIDTH: 1 5/8”. Weight capacity per pair: 60 lbs. Sold as a Set of 2. The pack includes screws as well, which will help you secure the L Brackets safely..
  • VARIOUS USAGE: These corner shelf wall mount brackets can be used for decorating your home office or store shelves. These shelf brackets are elegant and sophisticated enough for indoor use while also being tough and durable enough for outdoor use without wear or corrosion. Shelf braces can also be used for mounting cisterns, sinks, roof supports, columns, pillars. and frames giving an extra edge to your decor..
  • CLASSIC QUALITY FINISH: These Right Angle Brackets are Heavy Duty ANTIQUE BRASS finish. This is done to keep away rust & premature wearing, Keeping the shelves look pristine for as lo....
Check Stock

Set of 2 Shelf Brackets 9 7/8 x 7 3/8 Inches Heavy Duty Brass L Brackets with Polished Brass Finish for Shelves Corner Shelf Wall Mount Bracket DIY Kitchen Shelving Right Angle Braces

  • HEAVY DUTY SHELF BRACKETS: These authentically designed corner wall shelf brackets are HANDCRAFTED in BRASS and are ADJUSTABLE, so mounting them in either direction can be done makes it easy for you to use according to your convenience. These heavy duty shelf brackets can hold up to 60 lb. These Right Angle L Shelf Brackets can hold up to 8” or 10” deep shelves..
  • DIMENSIONS & WEIGHT CAPACITY: Corner brace shelf bracket having dimensions of the L Brackets are as follows.
  • LENGTH: 7 3/8”, HEIGHT: 9 7/8”, WIDTH: 1 7/8”. Weight capacity per pair: 60 lbs. Sold as a Set of 2. The pack includes screws as well, which will help you secure the L Brackets safely..
  • VARIOUS USAGE: These corner shelf wall mount brackets can be used for decorating your home office or store shelves. These shelf brackets are elegant and sophisticated enough for indoor use while also being tough and durable enough for outdoor use without wear or corrosion. Shelf braces can also be used for mounting cisterns, sinks, roof supports, columns, pillars. and frames giving an extra edge to your decor..
  • CLASSIC QUALITY FINISH: These Right Angle Brackets are Polished Brass finish. This is done to keep away rust & premature wearing, Keeping the shelves look pristine for as long as you....
Check Stock

Set of 2 Shelf Brackets 5 7/8 X 7 7/8 Inches Heavy Duty Brass L Brackets with Brushed Nickel Finish for Shelves Corner Shelf Wall Mount Bracket DIY Kitchen Shelving Right Angle Braces

  • HEAVY DUTY SHELF BRACKETS: These authentically designed corner wall shelf brackets are HANDCRAFTED in BRASS and are ADJUSTABLE, so mounting them in either direction can be done makes it easy for you to use according to your convenience. These heavy duty shelf brackets can hold up to 60 lb. These Right Angle L Shelf Brackets can hold up to 6” or 8” deep shelves..
  • DIMENSIONS & WEIGHT CAPACITY: Corner brace shelf bracket having dimensions of the L Brackets are as follows.
  • LENGTH: 5 7/8”, HEIGHT: 7 7/8”, WIDTH: 1 5/8”. Weight capacity per pair: 60 lbs. Sold as a Set of 2. The pack includes screws as well, which will help you secure the L Brackets safely..
  • VARIOUS USAGE: These corner shelf wall mount brackets can be used for decorating your home office or store shelves. These shelf brackets are elegant and sophisticated enough for indoor use while also being tough and durable enough for outdoor use without wear or corrosion. Shelf braces can also be used for mounting cisterns, sinks, roof supports, columns, pillars. and frames giving an extra edge to your decor..
  • CLASSIC QUALITY FINISH: These Right Angle Brackets are Brushed Nickel finish. This is done to keep away rust & premature wearing, Keeping the shelves look pristine for as long as you ....
Check Stock

12Pcs 2.5” Stainless Steel Angle Bracket Wide Metal Brackets for Brace Heavy Duty Corner Bracket Corner Brace 90 Degree Joining Brace Bracket for Wooden Frame Bed Furniture Bookshelf

  • 2.5INCH METAL ANGLE BRACKETS FOR WOOD: 38MM wide design provides great load capacity and is more durable than most stainless steel corner brackets on....
  • HEAVY DUTY CORNER BRACKET: The internal corner brackets are made of high quality stainless steel with a black finish that is rust and corrosion free....
  • 90 DEGREE CORNER BRACE SUPPORT: Metal corner brace has smooth surface and round edges for an elegant, scratch-resistant appearance, which won’t....
  • RIGHT ANGLE BRACKET SIZE: Overall Size: 2.5”x2.5”x1.5”(LxWxH).
  • The 2.5inch angle bracket has 4 holes with countersunk screw....
  • WIDE USED IN HOME DIY PROJECT OR OUTDOOR: Stainless steel corner brace bracket is essential brackets hardware, widely used for stabilize and reinforce....
Check Stock