Reviews Rf Series Antenna

Professional RF Cable TV Signal Amplifier with High 40dB Gain

  • Professional-grade cable TV and antenna signal amplifier with high 40dB output level. Supports TV coax cable signal from cable outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 1700FT or 500m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/di....
Check Stock

MINIMOD 2 Vecoax | HDMI to Coax Modulator to distribute Your hdmi Video Sources to All TVs as HD Channels Over existing tv Coax Cables

  • HDMI RF Modulator - HDMI to coax / RCA CVBS composite adapter will hook up your streaming media players like Apple TV, Amazon Fire Stick , Fire TV,....
  • RF Modulator RCA Coax - Convert HDMI digital signals into RCA CVBS & VHF TV ( RF ) analog signals at the same time, then you can connect a TV that....
  • HDMI to Coax Adapter - One F type female coaxial input for connection of antenna , hd tv tuner , satellite set-top / cable box ,and a separate RF coax....
  • RF Modulator for TV - HDMI in F Type Female ANT ( antenna ) out with coaxial RF analog signals.
  • No drivers / adapters needed, plug and play , easily &....
  • HDMI to RCA - Multifunctional VHF TV demodulator also is a hdmi to AV converter for old TV , monitor , projector , vhs player or capture card devices....
Check Stock

Ham It Up Plus - HF/MF/LF/VLF/ULF Upconverter w/TCXO

  • A high-quality RF (ULF/VLF/LF/MF/HF) converter for software defined radio devices like our NESDR series (RTL-SDR) and the HackRF--extends your radio range down to 300Hz.
  • The Ham It Up Plus is fully assembled in a custom, black, aluminum enclosure, tested, and ready to use. Includes SMA to SMA connector to attach the output to your radio, and an SMA to BNC antenna adapter..
  • A separate noise source circuit is included for testing and calibration of various RF devices.
  • Proudly made in the USA and Canada! Full 2 year product warranty, directly through Nooelec.
  • Ham It Up Plus has all the same fantastic features as the popular Ham It Up (v1.3), and shares an identical form factor to ensure compatibility with optional enclosures and Ham It Up addons (available separately).
Check Stock

Elvid SkyVision WCM-758G 7 Wireless LCD Monitor 4 Pack

  • 1024 x 600 Resolution LCD/LED Display | Built-In 5.8 GHz Receiver | For Aerial Imaging Platforms.
  • Analog Video Input RF & Composite In/Out | 32 Channels Over 4 Bands | HDMI Input.
  • Display Remains Active with Weak Signal | Built-In Sony L Series Type Batt Plate | Collapsible Removable Sunshade.
  • What's In The Box: Antenna, Collapsible Sunshade, HDMI to Mini HDMI Cable, Limited 1-Year Warranty.
Check Stock

Elvid SkyVision WCM-758G 7 Wireless LCD Monitor 3 Pack

  • 1024 x 600 Resolution LCD/LED Display | Built-In 5.8 GHz Receiver | For Aerial Imaging Platforms.
  • Analog Video Input RF & Composite In/Out | 32 Channels Over 4 Bands | HDMI Input.
  • Display Remains Active with Weak Signal | Built-In Sony L Series Type Batt Plate | Collapsible Removable Sunshade.
  • What's In The Box: Antenna, Collapsible Sunshade, HDMI to Mini HDMI Cable, Limited 1-Year Warranty.
Check Stock

Cable Matters 2-Pack SMA Male to F-Type Female Coax Cable Adapter Gender Changer Coaxial Cable Adapter for USB SDR Dongle Two-Way Radio Ham Radio Antenna and More

  • Convert between standards and connector gender with the 2-pack of F-Type Female to SMA Male RF adapters.
  • Coax adapter F-Type to SMA converts a connector, antenna, or cable connector between coax cable connector types.
  • F-Type and SMA connectors are commonly found on two-way radios, software defined radio dongles, antennas, and other RF connectivity products.
  • SDR antenna adapter enables a USB radio dongle to connect to antennas using standard F-type coax connectors.
  • Compatible with RTL-SDR dongle and adapters.
  • Radio antenna adapter enables flexibility and increases your antenna choices.
  • Ham radio antenna adapter connects radio equipment to standard coax antenna adapter.
  • High quality coaxial adapter features a 50 Ohm impedance rating for optimal performance and supports a frequency range of 0-6GHz, ideal for use as a radio antenna adapter, radio astronomy adapter, and other uses requiring high-frequency signals.
Check Stock

NESDR SMArTee v2 Bundle - Premium RTL-SDR w/Integrated Bias Tee, Aluminum Enclosure, 0.5PPM TCXO, SMA Input, Antenna Base & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio (SDR)

  • An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases!.
  • Unmatched price & performance–redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed .
  • Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues–run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi!.
  • Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software.
  • Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!.
Check Stock

Five Star LTE Filter Improves TV Antenna Signals - HDTV Antennas Signal Purifier - Filters 4G Signal for a Clear Channels - Reduces Interference from Cell Towers - Pass Frequency 5-599Mhz

  • FILTERS ALL 4G LTE SIGNAL NOISE - Our LTE filter removes all noise caused by 4G cellular signals, letting through only TV signal frequencies between 5-599MHz, which allows you to experience quality, crisp TV with no cellular interference..
  • 4G LTE Filter - IMPROVES TV ANTENNA SIGNALS:4G lte filter removes noise for better picture.
  • Cleaning unwanted RF signal out of HDTV antenna system effectively. HDTV Band-pass filter can remove interference from frequency bands（3G/4G） outside the TV band. It can improve the TV signal..
  • Improves over the air signals by filtering out mobile LTE signal interference (3G and 4G) which can cause intermittent TV signal disruption including weak signals..
  • Simple installation - lte filter for antenna no external power supply required.Head connected to the antenna, tail connected to antenna amplifier or tv. LTE Filter, made only from premium materials, fits any TV antenna or amplifier and improves your signal, giving you crystal clear HDTV every time..
  • WORK FREQUENCY: Pass Frequency：5-599MHz. Cleaning unwanted RF signal out of HDTV antenna system effectively,Signal loss is 3dBi or less. Impendance: 75 Ω.
Check Stock

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

  • Professional-grade cable TV and antenna signal amplifier with high 50dB output level. Supports TV coax cable signal from cable outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/di....
Check Stock

AMANA PTAC 15,000 BTU Air Conditioner PTC153K35AXXX with 3.5 KW Heater

  • .../16" x 14 1/8". Cool and heats an application area up to 850 sq. ft. Power Cord 6-20 P.
  • The purchase will include the Amana MMW-2 Wireless Thermostat that can control your Amana PTAC from anywhere in the room. The Wireless Thermostat includes the appropriate antenna required for communication between the unit and the thermostat..
Check Stock