Reviews Rf Receiver Module

Smart RF Relay Switch eMylo Wireless Remote Control Switch DC 12V One Channel Momentary Module 433Mhz Relay Receiver with Two Transmitters

  • ♥ RF Remote Control Switch: lamps or other household electric appliances are controllable using the remote control, which features long control distance, sensitivity, high anti-interference performance and stability..
  • ♥Excellent stability--The relay module provides high signal sensitivity at lower cost and resist interference.
  • ♥Strong signal--eMylo RF relay switch can pass through walls, floors and doors, control receiver from any place within a reliable distance.
  • ♥ More Flexibility & Widely Application: eMylo RF Relay Switch adopts non-directional wireless encoding technology, allowing independent control without mutual interference, can be used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc..
  • ♥Easy to set up:The programmable RF receiver and transmitter can be flexibly configured in quantity and in operating modes..
Check Stock

RF Coax to HDMI DVI Demodulator Analog TV Tuner for NTSC System

  • Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals. Supports all coax signals coming from cable outlets or cable boxes with RF output only, satellite receivers or modulated CCTV security systems. Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs..
  • Advanced RF coax TV demodulator for converting the RF coax cable TV signals into either 1080p HDMI or DVI output at 1920×1080 pixels..
  • Full-frequency analog NTSC cable channel support from CH2 to CH139. Full aerial VHF/UHF channel support from CH2 to CH83. Easy replacement solution for HDTVs with broken coax tuner inputs. External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth digital video/audio output. [Note]: This is an analog TV tuner so it can not be used for digital cable channels and can not accept antenna input..
  • Multiple tuner units can work together with video wall system or split-screen video processor to form a large-scale display system or display multiple TV channels on one screen at the same time. Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater syst....
Check Stock

Bluetooth / 802.15.1 Development Tools Adafruit Feather M0 Bluefruit LE

  • Works with all of Adafruit's three basic 315MHz RF receiver modules.
  • Only a transmitter, no receiver module included.
Check Stock

RF Coax to HDMI DVI Demodulator Analog UHF VHF CATV Tuner for NTSC System

  • Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs. Supports all coax signals coming from cable....
  • Professional grade agile RF coax demodulator for converting the RF coax cable TV. External add-on TV tuner module for LCD TV, HD monitor/projector....
  • Premium de-Interlacer with low noise reduction technology adopted for clear and sharp images with fine details. [Note]: This is an analog TV tuner so....
  • Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater system. Easy operation control via IR remote....
  • Automatic video/audio gain control for compensating the input signal level variation for the best broadcast quality performance. Supports last channel....
Check Stock

Drone Racing League: 2017 eSports Tryouts

  • ...ke other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE.
  • 【About Bind】The stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0.
  • Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and then could be bound together. If you don't know the firmware version, please contact us directly and we will solve the problem for you..
Check Stock

PSI Woodworking LR110-3 Long Ranger III 110V Remote Dust Collector Starter Switch

  • Save yourself the inconvenience of walking over to turn on your dust Collector while you're in the middle of a critical project.
  • Includes: receiver, hand control, 9V battery.
  • RF signal goes through walls with no outside interference: Unlimited programmable frequencies.
Check Stock

Durablow TR2003 Gas Fire Fireplace On/Off Remote Control Kit + Thermostat + Timer for Millivolt Valve, IPI Module, Replaces Wall Switch or Thermostat (Input 100-240VAC)

  • ★★ ATTENTION: This device is NOT a power supply unit. It is a switch designed for connecting to Millivolt valve, or to electric spark ignition module, or can replace wall switch..
  • ▼ All battery powered R.F. 2-button transmitter and receiver box kit gives wireless remote control to a gas heating appliance, such as gas fireplace, fire pit, stove. ▼ This is a simple On/Off remote control, gives an instant & manual control of the flame and heat..
  • ▼ Receiver with LEARN function, snap-on wall plate, and 18-inch wires with connectors to connect MILLIVOLT valve, or electric spark ignition module, or to replace wall switch. ▼ Receiver box dimension: 2.6"x2.4"x1.54". (measure your wall outlet box first).
  • ▼ Replaces Cross Reference Model #: SKY, 1001, 1001-A, 1001TH, 1001T, 1001D 1410, 1410T, 1410-A, 1410TH, RG04-1M, UN3. ▼ LEGAL DISCLAIMER: The Brand name & Model # (if listed) are for cross reference only. All Brands, Trademarks & Model Numbers remain the property of their respective owners..
  • ▼ Includes: Remote transmitter, receiver box, wall mount cover plate, screws, slide switch, wires with connectors, manuals / instructions. ▼ FCC approved. Operates at a range of 20-foot & non-directional RF signal. ▼ Transmitter operates (2) 1.5V AAA bat....
Check Stock

FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone XM

  • Notes： Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM+ RXSR receiver.This insanely tiny 2.4GHz diversity....
  • XM Plus Receiver supports failsage function for all channels. Protect your perfectly henever the control signal is lost for a period of time.
  • Up to 16CH from SBUS ( CH1-CH15 for PWM, CH16 RSSI for FC,such as F3, Naze32 flight controller ). Compatible ------ Compatible with Frsky X9D Plus X9E....
  • weight:1.6g, Dimension: 21.5*12*3.5mm(L x W x H).Frsky XM Plus mini receiver is perfect for those racers who are looking to lower their AUW,....
  • FrSky XM Plus is dual antenna ( Frsky XM is only one), with dual antenna, it has strong anti-interference, make sure you can control your drone....
Check Stock

BETAFPV ELRS LiteRadio 2 SE Radio Transmitter Remote Controller with Built-in 1000mAh 1S Battery for FPV RC Racing Drones Multirotor Sim Joystick Calibration - Mode 2 Left Throttle

  • ...ke other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE.
  • 【About Bind】The stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0.
  • Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and then could be bound together. If you don't know the firmware version, please contact us directly and we will solve the problem for you..
Check Stock

Rage RC A1305 Curtiss P-40 Warhawk Micro Rtf Airplane W/Pass

  • 1) Bring the transmitter and the receiver close to each Other, within 20 inches (half meter)..
  • 2) Integrated stabilizing circuit, operating voltage up to 1-2S Lipo, it won’t be out of control for sudden low voltage.
  • 3) Light weight, micro size, full 4CH output, especially for Mini-Z or mini aircraft..
  • 4) Operating Voltage: 3.3V～8.4V Weight: 3.5g ,Channels: 4CH, Built-in Antenna.
  • 5) Compatible: Futaba S_FHSS/ TM-FH RF Module control system.
Check Stock