Reviews Retrofit Panels

Secure It Gun Storage Gun Safe Kit: Steel 6 - Safely Organize Your Guns with This Easy to Use Modular System, Protect Your Guns Investment from Scratches.

  • INCLUDES- The Steel 6 can accommodate 6 sporting rifles, tactical long guns, or traditional firearms. Ideal for small spaces and comes with 6 cradles (2.5"w x 6.5"d), 2 louvered panels(17.25"w x 16"h), 3 interlocking stock base (2 firearms per base)(5 7/8"w x 10"d x 2"h)..
  • RETROFIT ANYWHERe- This kit can be used in a closet in your bedroom or in a locked kitchen cupboard..
  • UPGRADED STORAGE- Use this kit to upgrade an existing cabinet, retrofit any traditional safe or gun cabinet you prefer..
  • ULTRA ADJUSTABLE- The cradles adjust on the louvered grids to support individual firearms at the barrel, rail or mag well..
  • NO REZEROING- Allows standoff to accommodate attached optics so there is no need to re-zero when you retrieve a firearm from your cabinet or secured location..
Check Stock

Baseboarders 2' Length Premium Baseboard Heater Cover Panel Only

  • ...parately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will....
Check Stock

Baseboarders Premium Galvanized Steel Inside 90 Degree Corner Connector - White (Any Size)

  • Baseboarders Premium Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will ....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Coupler)

  • ...arately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only..
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will....
Check Stock

Morris Products 72606 LED Recessed Lighting Retrofit Kit 4\ 5000K Smooth Bezel, 1 Pack

  • LED Recessed Lighting Retrofit Kit 4" 5000K - LED Recessed Lighting Retrofit Kits provide an energy efficient alternative to Incandescent lighting..
  • LED Recessed Lighting Retrofit Kit 4" 5000K features include:.
  • LED Retrofit Kits for Recessed Downlighting.
  • Simple Screw In Installation Including In-Line Pluggable Disconnect.
Check Stock

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (6 ft, Cover + L&R End Caps)

  • ... Series Set includes one panel with a left and right closed end cap to cover any standard sized baseboard heater. If necessary, panels can easily be cut to fit your heater length..
  • Baseboarders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will....
Check Stock

Baseboarders Premium Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (3 ft, Cover + L & R End Caps)

  • ...um Series Set includes one panel with a left and right closed end cap to cover any standard sized baseboard heater. If necessary, panels can easily be cut to fit your heater length.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will....
Check Stock

Baseboarders Premium Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (2 ft, Cover + L & R End Caps)

  • ...ies Set includes one cover panel with a left and right closed end cap to cover any standard sized baseboard heater. If necessary, panels can easily be cut to fit your heater length.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Closed End Cap - Right)

  • ...h pipes that bend down into the floor or back into the wall. They do not continue into an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products wi....
Check Stock

240W Shoebox LED Retrofit Kit AC100-277V LED Parking Lot Light Fixture Retrofit 5000K Replace 1000W Metal Halide ETL Listed E39 Base for Outdoor Sports Court lights Street Area Lighting Fixture

  • 【SUPER BRIGHT AND ENERGY SAVING】This shoexbox LED retrofit kit provides uniform 34,800lumens at 240W with an incredible Lumen Efficacy of 145 Lm/W to replace 1000W MH/HPS/HID traditional light fixtures, effectively saving 90% of the amount on your energy bills. 80+ CRI Rating and 5000K daylight for super bright outdoor large area lighting..
  • 【RETROFIT OLD LIGHTING FIXTURES, SAVE MONEY】Advanced SMD3030 chips and Meanwell driver ensure our LED shoebox retrofit kit high efficiency, long life and high reliability. Excellent heat dissipation system with overheat protection sensor, aluminum heat sink and high speed fan to protect leds at lower operating temperature. Longer lifespan of 500,00 hours, that's about 23 years of 6 hours per day, which will reduce maintenance cost dramatically..
  • 【EASY & SAFE INSTALLATION】Shoebox led Retrofit Light Kit has a wide 120 degree beam angle. Just connect the E39 base and Meanwell driver to the fixture socket to quickly replace damaged old bulbs. No need to replace existing fixtures. Adjustable U bracket for horizontal and vertical mounting. Please check retrofit kit picture and dimensions to ensure fitment..
  • 【ETL ENSURE WIDE APPLICATION】YELLORE retrofit kit with ETL certifications, ETL approved for use in li....
Check Stock