Reviews Resistant To Microwaves Pulleys

Boat Pulley Blocks, Sailing Pulley Stable Stainless Steel Easy to Disassemble with Bearing for Boat for Canoe for Kayak

  • the pulley comes with high-quality nylon card slot design.
  • -The single pulley roller is made of steel, and it is strong, anti-rust, wear-resistant, corrosion-resistant and durable..
  • -The fixed pulley prevents the rope from twisting. The smooth roller ensures a good movement of the rope..
  • -Rotating pulleys can be used with indoor or outdoor ropes or cords for flexible sliding..
  • -Flexible sliding pulleys that can withstand heavy loads.
Check Stock

Sterling PULZ8 Single Swivel Pulley Wheel, Silver

  • High quality materials: Our pulley wheel made of 304 stainless steel, Rugged nylon sheave ,wear-resistant, rust-proof and durable, suitable for all types of wet and difficult outdoor environments..
  • Effort-saving Design : The fixed pulley prevents the rope from twisting, The smooth roller ensures a good movement of the rope..
  • Quiet Pulley Wheel:Our pulley wheel uses flexible and smooth wheels can reduce the noise and would not affect surrounding life at all..
  • Easy to Use : Flexible sliding pulleys that can withstand heavy loads.
  • Wide Applications : Rotating pulleys can be used with indoor or outdoor ropes or cords for flexible sliding..
Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock

Boosted Board 25% Higher Acceleration Pulley Kit (Kegel (Stock Boosted) Pattern)

  • HAVE BIGGER WHEELS? WANT MORE ACCELERATION? 25% higher acceleration gear ratio*** - Comes with 2 Custom Belts. Our pulleys change the motor gear ratio by increasing the motor pulley size. Bigger pulley = more acceleration..
  • MATERIAL: Made from impact-resistant ABS, 3D printed, with impregnated metal for higher longevity and durability.
  • WARRANTY: 3 months or 200 mile warranty, which over comes first.
  • BOARD COMPATIBILITY: All Boosted Boards - V2, V3, Mini, Mini-X, Stealth. Our pulleys are larger and so the stock belt covers no longer fit in order to fit the larger pulley.
  • WHEEL COMPATIBILITY: Any Boosted Branded Wheel (105s, stock, etc.), Orangutang Caguama, Torque Board... any wheel with 10 pin holes for the pulley.
Check Stock

OTC 4754 Universal Pulley Holder Wrench with Interchangeable pins

  • Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.
  • Wrench is adjustable from 1-1/2 to 8-5/8 inches, allowing it to work with a wide variety of pulleys.
  • Includes 4 different sets of interchangeable step pins.
  • Long handle enables you to easily hold the pulley when tightening or loosening retaining bolts.
  • Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check Stock

ACDelco Gold 6K960 Standard V-Ribbed Serpentine Belt

  • ...s Duralast 231098, Gates 38043, ACDelco 38043, CARQUEST 38043, NAPA 38043, Dorman 419-610, Four Seasons 45019, Freshstart 49025, Goodyear.
  • REDUCE VIBRATIONS: If you are looking for a quality replacement for your worn serpentine or V-belt idler and tensioner pulleys, turn to Dayco. Constructed from spun steel or wear-resistant plastic with specially formulated glass-filled polymers, these pulleys feature smoother surfaces and tighter dimensional tolerances to reduce vibration and therefore prolong belt life. Lubricated bearings and high temperature seals assure peak performance, the most critical element of a pulleys service life.
  • EXTEND SERVICE LIFE: Developed and designed using state-of-the-art three dimensional computer aided design (CAD) and finite element analysis (FEA) to ensure the optimal design and maximum structural integrity. Built to last, the Idler Pulley has superior resistance to dirt, salt, chemicals, and other under-the-hood contaminants.
  • RELY ON QUALITY AUTO PARTS: Dayco's essential engine parts and drive system solutions offer engine economy, efficiency, and exceptional performance while minimizing noise, vibration, and harshness. They strive to be first-to-market with built-to-last products such as high-quality engine timing belts, se....
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

SPI Fix Kit 2010-2012 fits Polaris 800 Sleds 85mm Pistons Bearings & Fix Kit

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1"-3/4"x1/4"-3/16" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock