Reviews Resin For Polyurethane Foam

2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Gallon Kit)

  • Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam 2 Gallon Kit.
  • Consists of 1 gallon of Part A and 1 gallon of Part B and produces 10 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam 1 Gallon Kit.
  • Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 5 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

AWF PRO Sikaflex 1a Kit - One Component, Flexible, Non Sag, Polyurethane Concrete and Masonry Sealant for Vertical and Horizontal Surfaces, Sikaflex 1a 10 oz Limestone (12), AWF 2000 Caulk Gun (1)

  • Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam Quart Kit.
  • Consists of 1 pint of Part A and 1 pint of Part B and produces 1.25 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (Quart Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam Quart Kit.
  • Consists of 1 pint of Part A and 1 pint of Part B and produces 1/2 cubic foot..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

6 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boats, Dock Flotation, Carving, Soundproofing, Filling Voids, and Insulation (Quart Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 6LB. Density polyurethane flotation Foam 1 Quart Kit.
  • Consists of 1 Pint of Part A and 1 Pint of Part B and produces 0.375 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 6LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Quart Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam 1/2 Gallon Kit.
  • Consists of 1 quart of Part A and 1 quart of Part B and produces 1 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam 1 Gallon Kit.
  • Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 2 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

Magnaturals Reptile Water Dripper Mojave - Magnetic Decor

  • Hold 2 cups of water. 2nd valve included..
  • 100% non-toxic materials. Made from Polyurethane Foam Resin. Easy to clean..
  • Magnetic force guaranteed for life. Works on habitats with glass up to 1/4" thick..
  • Install or relocate in seconds. No glue or velcro..
Check Stock

Magnaturals Small Hideaway Granite - Magnetic Decor

  • Install or relocate in seconds. No glue or velcro.
  • 100% non-toxic materials. Made from Polyurethane Foam Resin. Easy to clean..
  • Magnetic force guaranteed for life. Works on habitats with glass up to 1/4" thick..
  • Create exciting terrariums with multiple units..
Check Stock

TotalBoat Flotation Foam - 2 Part Expanding Polyurethane Marine Pour Foam for Boat Floatation, Insulation and Soundproofing (2 LB Density, 2 Gallon Kit)

  • LIGHTWEIGHT, TWO PART POLYURETHANE FOAM: Ideal for adding buoyancy, thermal insulation, soundproofing, and filling gaps or voids.
  • tested in accordance with U.S. Coast Guard Regulation # 33 CFR 183.114.
  • EASY TO USE: Liquid urethane pour foam has a simple 1:1 mix ratio, expands rapidly & hardens in place in about 5 min. at 70-80°F.
  • to build multiple layers for filling under boat decks, pour expanding foam in separate batches.
  • 94% CLOSED CELL FOAM: Perfect for marine applications.
  • resists water absorption and damage from gas, oil or solvents.
  • once cured, foam can be coated with polyester, epoxy or vinyl ester resin.
  • can also be easily cut or carved to shape.
  • proper temperature, timing, mixing and venting are critical for proper foam expansion.
  • after mixing, the foam expands rapidly and becomes rigid, so clean the surface in advance and be ready to pour.
  • AVAILABLE IN A 2 QUART KIT AND A 2 GALLON KIT.
Check Stock