Reviews Remove Torque Tester

Rear Axle 36MM Wrench Rear Wheel Axle Torque Wrench Hand Tools Similar to HD-47925

  • 1. Used for simple adjustment of drive belt tension or rear wheel alignment.No need to remove any exhaust components..
  • 2. Heavy duty enabling the use of great force and striking.Similar to HD-47925.
  • 3. Made removing and re-torquing the axle nut easy without removing the right side muffler. Still had to remove left side muffler to remove the axle. Saved some time and made the job a lot easier..
  • 4. Feature: This 36mm wrench includes a 1/2 inch square drive allowing for use with a torque wrench for proper axle torque.Remember, if attaching to your torque wrench, this wrench MUST be turned 90 degrees from the direction of your torque wrench. Positioning it this way means it does not alter the length of your torque wrench and screw up your torque..
  • 5. Package included: -- 1x 36mm Rear Axle Wrench.
Check Stock

ABN Torque Multiplier Wrench – Torque Multiplier 1 Inch Drive Lug Nut Wrench Torque Amplifier Lug Nut Remover

  • REMOVE RUSTED LUGNUTS WITH EASE: Forget about fighting those rusted lug nuts when trying to remove a tire on the side of the road.
  • Not even your extended cheater bar can help now.
  • Instead, use the ABN Heavy Duty Torque Multiplier Wrench Set to quickly loosen and remove stubborn lug nuts with minimal effort.
  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • DURABLE TORQUE MULTIPLIER: Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 3200 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • EASY TO USE: Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut.
  • 3 inch (75mm) extension bar helps to remove nuts quickly after being loosened.
  • Use the square socket for square duel lug studs.
Check Stock

XtremepowerUS Multiplier Torque Wrench Labor Saving Lug Nut Wrench Cr-v Socket (Torque Wrench W/ 4 Socket) + Case

  • Remove Rusted Lugnut with Ease - Heavy Duty Torque Multiplier Wrench Set to quickly loosen and remove stubborn lug nuts with minimal effort.
  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
  • 6-point sockets include sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm).
  • This labor saving wrench set fits your other 1-inch drive sockets.
  • Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 3200 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • Simple to Use - Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady....
Check Stock

XtremepowerUS Torque Wrench Labor Saving Lug Nut Wrench Torque Multiplier w/ Cr-v Socket (Torque Wrench W/ 8pc Socket Set)

  • Remove Rusted Lugnut with Ease - Heavy Duty Torque Multiplier Wrench Set to quickly loosen and remove stubborn lug nuts with minimal effort.
  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • Simple to Use - Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut, extension bar helps to remove nuts quickly after being loosened.
  • Use the square socket for square duel lug studs.
  • Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 4800 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) e....
Check Stock

9 Pieces Automotive Compression Tester Kit and Spark Plug Tester, Universal Car and Motorcycle Engine Testing Tools for Cylinder Pressure Gauge (Red)

  • ... dual units, the gauge cover is protected by an anti-scratch coating and rubber protection to absorb shocks.
  • Plus, all the items are contained in an ABS case for easy storage, the fittings can accommodate most or all of your needs for most engines, good kit overall for your garage.
  • 【Easy and Safe to Use】: first, remove the fuel pump and fuel-injection fuses, disconnect the main wire to the coil and spark plug wires, and remove spark plugs.
  • And then start the threaded end of the compression gauge in a spark plug hole by hand.
  • Last, turn the ignition on, depress the throttle, and crank the engine four revolutions to get accurate data.
  • Note: please make sure that all parts are well installed before proceeding to the cylinder pressure test.
  • Do NOT touch any of the spark plug tester or any part of the test units when the ignition is on, switch off the engine and take out the key each time before you touch them.
  • If any other questions on this product, please don't hesitate to contact us, we are always glad to help.
Check Stock

9 Pieces Automotive Compression Tester Kit and Spark Plug Tester, Universal Car and Motorcycle Engine Testing Tools for Cylinder Pressure Gauge (Blue)

  • ... dual units, the gauge cover is protected by an anti-scratch coating and rubber protection to absorb shocks.
  • Plus, all the items are contained in an ABS case for easy storage, the fittings can accommodate most or all of your needs for most engines, good kit overall for your garage.
  • 【Easy and Safe to Use】: first, remove the fuel pump and fuel-injection fuses, disconnect the main wire to the coil and spark plug wires, and remove spark plugs.
  • And then start the threaded end of the compression gauge in a spark plug hole by hand.
  • Last, turn the ignition on, depress the throttle, and crank the engine four revolutions to get accurate data.
  • Note: please make sure that all parts are well installed before proceeding to the cylinder pressure test.
  • Do NOT touch any of the spark plug tester or any part of the test units when the ignition is on, switch off the engine and take out the key each time before you touch them.
  • If any other questions on this product, please don't hesitate to contact us, we are always glad to help.
Check Stock

9 Pieces Automotive Compression Tester Kit and Spark Plug Tester, Universal Car and Motorcycle Engine Testing Tools for Cylinder Pressure Gauge (Black)

  • ... dual units, the gauge cover is protected by an anti-scratch coating and rubber protection to absorb shocks.
  • Plus, all the items are contained in an ABS case for easy storage, the fittings can accommodate most or all of your needs for most engines, good kit overall for your garage.
  • 【Easy and Safe to Use】: first, remove the fuel pump and fuel-injection fuses, disconnect the main wire to the coil and spark plug wires, and remove spark plugs.
  • And then start the threaded end of the compression gauge in a spark plug hole by hand.
  • Last, turn the ignition on, depress the throttle, and crank the engine four revolutions to get accurate data.
  • Note: please make sure that all parts are well installed before proceeding to the cylinder pressure test.
  • Do NOT touch any of the spark plug tester or any part of the test units when the ignition is on, switch off the engine and take out the key each time before you touch them.
  • If any other questions on this product, please don't hesitate to contact us, we are always glad to help.
Check Stock

ABN Inline Spark Plug Tester – Straight Boot Ignition Test Light for Small Engine Car, Motorcycle, Lawn Mower, Chainsaw

  • ...iend crank the engine so you can watch for indications of a spark.
  • LIGHT INDICATION: Spark plug light spark checker indicates inconsistencies and sparks in a way that keeps you safe from electric currents.
  • Intense bright white light indicates a healthy spark while jumping and dim color indicates a weak coil or plug.
  • Remove the guesswork by using this lawn mower spark plug tester and coil pack tester.
  • Disassemble sparkplug tester tool to access and replace the internal bulb.
  • BUILT TO LAST: Premium materials are used to ensure maximum strength, longevity, and versatility for this inline spark tester tool.
  • Each engine spark tester automotive spark plug checker features a 3 inch (7.6cm) nickel plated shaft and a 7 inch (17.8cm) rubber straight boot and cable.
  • Along with the 1 inch (2.5cm) light housing, this tool measures at a full 11.3 inches (28.8cm) long to check for spark in even the hard to reach areas.
Check Stock

Hiija RJ45 Crimper, RJ45 Crimp Tool Pass Through Cat5 Cat5e Cat6 Crimping Tool Kit for RJ45 Regular, 50PCS CAT6 Pass Through Connectors, Mini Wire Stripper, Wire Cutter plier

  • ...l RJ45 CAT5 CAT5e CAT6 connectors (including shielded) (excluding AMP) Even if you are a non professional, you can complete the work by following the instruction included in package.
  • RJ45 Crimping Tool: Made of professional-grade heavy-duty steel so it delivers exceptional torque without bending, die head assembly provides 360 degrees of connector support for terminating modular plugs on stranded or solid cable.
  • LAN/Network Cable Tester - We upgraded cable tester, which is not only more durable, but also the test range can reach up to 300M, the Network Cable Tester for cables with RJ45/RJ11/RJ12 conectors.
  • Use method - The LED lights will flash in rotation if all the wires are properly connected, otherwise the corresponding light will not flash..
  • Replacement blades - Our blades are wrapped in black molds, only need to be replaced as a whole when replacing, maximizing the replacement efficiency and success rate of crimping..
Check Stock

Cylinder Leak Down Tester Dual Gauge Leakdown Detector Kit - Tu-21 Cylinder Leakage Leakdown Test Set for Gasoline Engine

  • Features: The cylinder leak tester set with a ABS plastic blow-molded case can keep everything in place and protects the gauges during storage and....
  • Function: Leak tester kit is designed to detect a variety of common engine faults including: cracks in cylinder walls, worn piston rings, worn valves....
  • Wide Application: Engine leak down tester checks the amount of leakage in 4-stroke engines, fits all local and imported cars and trucks, ideal for....
  • Easy to Use: Remove the valve and turn the regulator off before applying shop air. Install the hose to the cylinder, calibrate the leak gauge, and....
  • What You Will Get: Cylinder Leak Down Tester Kit, including 480mm (18.9'') flexi hose, 12mm (0.47'') and 14mm (0.55'') spark plug adapters, fixed....
Check Stock