Reviews Regulated Output Current

Slim DIN Rail Mount AC/DC Current Sensor Module, Based on ACS712. (+/-20Amp)

  • The item disign based on ACS712 IC. The item provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection..
  • Operating Voltage: Regulated 5VDC. Operating Current: 20mA(max). Load Maximum Current: +/-5Amp, +/-20Amp and +/-30Amp selectable. Load Frequency Bandwidth: DC ~ 80 kHz. Minimum Isolation Voltage: 2.1 kV(RMS). Output voltage proportional to AC or DC currents. LED indicator for power supply +5V. Pin jumper option for signal output capacitor..
Check Stock

DC Power Supply Variable, Adjustable Switching Regulated Power Supply (0-120 V 0-3A) with 4-Digits LED Display, Beach Power Supply with USB Quick-Charge Interface, Short Circuit Alarm

  • ...rameters (M1 to M4) and output them quickly. List waveform output settings: You can edit and get output waveforms. The waveform set contains 10 editable points. The editable parameters for each point include output voltage, output current, waveform duration, and whether the point is selected..
  • ④Two USB Ports: This regulated power supply is equipped with two USB ports. Rear USB interface (upgrade program, upper computer control interface).
  • front 5V 1A USB interface can be used to charge mobile phones..
  • ⑤Package Contents and Warranty: 1 * Programmable DC power Supply 60V5A Kiprim DC605S.
  • 1 * Banana head to alligator clip cable. 1 * Power cable.
  • You can find the download link for the software and driver through the product description above. You can also contact us directly. We provide a 12 -month Warranty . If you have any questions, please contact us by Amazon and we will get back to you with a satisfactory answer..
Check Stock

Adjustable DC Power Supply (0-30 V 0-5 A) with Output Enable/Disable Button HANMATEK HM305 Mini Variable Switching Digital Bench Power Supply

  • ...y comes multiple protection of Over-voltage, over-current, over-power, over-temperature, short-circuit powerful protection function..
  • 【Wide Application】 - Applied in production line test, electrical maintenance, aging products, battery charging, laboratories scientific research and teaching and all other need DC regulated power supply.,Nice gift choice for DIY electronics hobbyist..
  • 【Package Included】 - 1 * HM305 Power supply host , 1 * Output power cord , 1* Input power cord , 1 * User manual.High quality material adopted and make it more stable output, small volume, light weight, easy to carry and move and easy operation..
Check Stock

Sonic the Hedgehog Archives, Vol. 0: The Beginning

  • 50/60 Hz US Pins - High Quality UL Certified power supply adapter cord for SEGA Nomad 32x CDX Genesis 2 and other retro consoles needing a replacement power brick.
  • Output: 9V DC 1500mA regulated output provides plenty of current juice. If your console requires less current, this will automatically supply the correct amount.
  • DC Barrel: 4.75mm x 1.7mm - Suitable replacement Nomad / 32X / CDX / Genesis II / Multi Mega / PC Engine Turbo Duo RX / Game Gear model 2110 / Victor Wondermega / SEGA PICO / JVC XEye and PAL JAP Mega Drive 2.
Check Stock

Hitech - 2000mA Car Charger for Sony PSP with Short Circuit & Overload Protection

  • DC car charger for Sony PSP. Allows you to charge PSP in the vehicle.
  • H-PI1004 is regulated and has short circuit and overload protection..
Check Stock

YIHUA 8786D-I Soldering & Rework Station bundle with YIHUA 305D-IV Regulated DC Lab Power Supply with Holder, Soldering Cleaning Kit, and Accessories (25 Items)

  • The bundle includes: The 8786D-I Micro-Soldering & Rework Station (Essential accessories included) with 305D-IV Regulated DC Lab Power Supply to provide variable regulated power output for your projects.
  • The 8786D-I station essential accessories include: 1 x 50g 0.8mm LEAD-FREE solder wire, 10 x assorted iron tips, 4 x assorted hot air nozzles, 1 x solder wick, 1 x solder sucker, 1 x IC extractor, 1 x grounding wire.
  • The 8786D-I micro-soldering & rework station: Hot air temperature from 212-896°F, soldering station temperature from 392-896°F. Both the soldering and hot air station has temperature stabilization function to keep your iron at the set temperature steadily for your work..
  • The 305D-IV Regulated DC Lab Power Supply: You can adjust the regulated power output from 0-5A, 0-30V for your work. The unit comes with automatic Constant Voltage & Constant Current mode, short-circuit protection and overcurrent protection to protect the device at work..
  • Quality Assurance: Because you buy directly from the manufacturer, you can enjoy 1-year quality assurance on all our soldering iron/station & rework stations/portable hot air guns. (*consumable product such as soldering iron tips are not covered by the warranty) On top of that, you'll also gain access to ....
Check Stock

SKYRC eFUEL 1200W/50A Regulated Power Supply High Power High Output

  • Over Temperature Protection Over Current Protection hort Circuit Protection Gives you Max Safety.
  • PFC, short for power factor correction, consists of active FPC and negative FPC. Active FPC, which is integrated into SkyRC 1200W/50A regulated power supply, can provide higher power utilization..
  • Active PFC is the use of power electronics to change the waveform of current drawn by a load to improve the power factor, thus achieving the purpose of higher efficiency. It’s capable of correction on AC input voltage and universal on a global basis..
  • Adopting the intelligent Air cooling system, the fan will be initiated automatically when operating temperature reaches 50 degree..
  • Maximum output of the main port is 50A, while each of other three deputy outlets provides up to 10A output with a switch to control respectively. 1200W output with 4 outlets to power your charger, you deserve to have one such power supply..
Check Stock

YIHUA 862BD+ Professional Soldering & Rework Station bundle with YIHUA 305D-IV Regulated DC Lab Power Supply with Holder, Soldering Cleaning Kit, and Accessories (22 Items)

  • The bundle includes: The 862BD+ Professional Soldering & Rework Station (Essential accessories included) with 305D-IV Regulated DC Lab Power Supply to provide variable regulated power output for your projects.
  • The 862BD+ station essential accessories include: 1 x 50g 0.8mm LEAD-FREE solder wire, 5 x assorted iron tips, 4 x assorted hot air nozzles, 1 x cleaning sponge, 1 x pair ESD-safe tweezers, 1 x solder sucker, 2 x holders, 1 x cleaning kit (brass ball & rosin), 1 x IC extractor.
  • The 862BD+ 2-in-1 professional soldering & rework station: Hot air temperature from 212-896°F, soldering station temperature from 392-896°F. Both the soldering and hot air station has temperature stabilization function to keep your iron at the set temperature steadily for your work.
  • The 305D-IV Regulated DC Lab Power Supply: You can adjust the regulated power output from 0-5A, 0-30V for your work. The unit comes with automatic Constant Voltage & Constant Current mode, short-circuit protection and overcurrent protection to protect the device at work..
  • Quality Assurance: Because you buy directly from the manufacturer, you can enjoy 1-year quality assurance on all our soldering iron/station & rework stations/portable hot air guns. (*consumable product such as soldering iron t....
Check Stock

Bradford Protein Assay w/BSA Protein Standard, 500 Assays, 10478- by Cepham Life Sciences

  • Linear Power Supply for Super quiet Output with low ripple and clean Voltage and Current.
  • High precision DC regulated power supply with 0-30 volts and 0-5 amp outputs.
  • Two operational modes: constant voltage and constant current.
  • Cooling fan automatic activation by built-in thermo-sensor,Back-lit LED Display with a 0.1V and 0.01A resolution,.
Check Stock

Dorhea MT3608 DC-DC Step Up Boost Power Converter 2A Module Adjustable Step Up Voltage Regulator Board Voltage 2-24V to 5V-28V Output Voltage Mico USB (Pack of 10)

  • Mini DC-DC step up voltage regulator with DC 2-24V input and 5V-28V output,just connected with USB power adapter then you can get 9V 12V 18V 24V voltge..
  • Board Size: 36 X 17 X 14mm/1.42 X 0.67 X 0.55inch(L*W*H)..
  • Equipped with MT3608 voltage booster chip with high conversion efficiency up to 93%..
  • Widely used for storage battery, power transformers, DIY adjustable regulated power supply, industrial equipment, 5V, 9V, 12V, 28V output, etc..
  • MT3608 includes under-voltage lockout, current limiting, and thermal overload protection to prevent damage in the event of an output overload..
Check Stock