Reviews Rectangular Exhaust Tips

AUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5' Inlet 3' Outlet 9.2' Length Chrome Polished Stainless Steel Double Layer Staggered Exhaust Tip for 2.5' OD Tailpipe, Slant Angle Cut, Weld On, Universal

  • universal fits 2.5″ outside diameter of trucks car exhaust tailpipe (Notice: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: Built from high-strength stainless steel, our chrome exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: The thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: Please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 Universal Dual Exhaust Tip 2.5 Inch Inlet, 2.5' Inlet 3.5' Outlet 9.5' Length Chrome Polished Stainless Steel Exhaust Tailpipe Tip, 2 1/2 Inch Double Layer Staggered Exhaust Tip, Weld-On

  • universal fits 2.5″ outer diameter of trucks car exhaust tailpipe (note: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5″ Outlet 3.2″ Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)

  • 【Protect Exhaust Pipes】: This tail pipe protects your original exhaust pipe, prevents it from deformation, and protect it from rain, dust and sand. It also cancels noise. With this exhaust pipe protector, you will have a better driving experience. There is a small hole at the bottom of the tip that can be used to drain water, with this hole there will be no standing water..
  • 【Car Decoration】: This exhaust tips is available in two colors, matte black and gold, this exhaust pipe is beautiful and generous, can decorate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic..
  • 【Dimensions】: The length of it is 5.7″, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5″. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand..
  • 【Material】: This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect yo....
Check Stock

KOBE CHX2230SQB-1 Brillia 30-inch Under Cabinet Range Hood, 3-Speed, 680 CFM, LED Lights, Baffle Filters

  • Durable 18-gauge commercial grade stainless steel with seamless design and satin finish.
  • 680 CFM at maximum power. Ducting: Vertical and horizontal.
  • 3-speed mechanical push button with QuietMode, low, and high.
  • Bright 3W (x2) LED lights to vividly illuminate your cooktop.
  • Exhaust: top 6" round, top 3-1/4" x 10" rectangular, rear 3-1/4" x 10" rectangular.
  • Must purchase TVC20 for rectangular venting.
Check Stock

KOBE CHX2230SQB-WM-1 Brillia 30-inch Wall Mount Range Hood, 3-Speed, 680 CFM, Fits Ceiling Height 7.5'-9.5'

  • Durable 18-gauge commercial grade stainless steel with seamless design and satin finish.
  • 3-speed mechanical push button with QuietMode, low, and high.
  • Bright 3W (x2) LED lights to vividly illuminate your cooktop.
  • Exhaust: top 6" round, top 3-1/4" x 10" rectangular, rear 3-1/4" x 10" rectangular.
  • Must purchase TVC20 for rectangular venting.
Check Stock

Big Gun Exhaust End Cap (EVO Turndown Tip) (Red)

  • This Billet exhaust tip on the market with its 15 degree angled outlet and machined gunbarrel divots at the tip..
  • This Billet exhaust tip fits on the end of your OEM exhaust system increasing your rides overall performance and sound..
  • This angle is not always present on the competitions exhaust tips as it is more time consuming to manufacture..
  • This angled outlet directs the exhaust fumes down and away from fenders and tailgates..
  • This power tip can be used either with or without the stock exhaust screen..
Check Stock

BRANO Under Cabinet Range Hood 30 Inch with Voice Control, 900 CFM Kitchen Hood Ducted Brushed Stainless Steel Vent Hood with LED Lights, Touch Control, Gesture Sensing Touchless Control, 4-Speed Fan

  • ...ir suction for your cooking fumes, while keeping the noise low and always sustain its optimal efficiency to capture smoke and odors. Also the 3min delayed shut-off function will effectively removes residual harmful fumes and leave your kitchen with fresh air..
  • 【EASY INSTALLATION】: Have 3 vent optional, including rectangular exhaust/round exhaust of the top, and rectangular exhaust in the back. Recommended 24'' to 30'' as the ideal distance from the countertop/stove to the bottom of the range hood, with a minimum 25.5'' for safety concern. A minimum of 6'' round duct (not included) or 9.75"x 3.14" Transition from rectangular connector to 6" round duct (not included) must be used to maintain maximum airflow efficiency..
  • 【WHAT YOU GET】: You will get a range hood, round sealing plate, round vent, manual and a pack of screws. The baffle filters are dishwasher friendly which will reduce your cleaning time and the stainless steel body can also be cleaned with a wet cloth with warm water. We provides with 10 years motor maintain and 5 years LED lights/switch maintain. Please according the product manual to install the range hood and please feel free to contact us if you need any assistance..
Check Stock

BRANO Under Cabinet Vent Hood 30 Inch, Kitchen Range Hood with Voice Control, 900 CFM Ducted Fan Brushed Stainless Steel with LED Lights, Touch Control, Gesture Sensing Touchless Control, 4-Speed Fan

  • ...ir suction for your cooking fumes, while keeping the noise low and always sustain its optimal efficiency to capture smoke and odors. Also the 3min delayed shut-off function will effectively removes residual harmful fumes and leave your kitchen with fresh air..
  • 【EASY INSTALLATION】: Have 3 vent optional, including rectangular exhaust/round exhaust of the top, and rectangular exhaust in the back. Recommended 24'' to 30'' as the ideal distance from the countertop/stove to the bottom of the range hood, with a minimum 25.5'' for safety concern. A minimum of 6'' round duct (not included) or 9.75"x 3.14" Transition from rectangular connector to 6" round duct (not included) must be used to maintain maximum airflow efficiency..
  • 【WHAT YOU GET】: You will get a range hood, round sealing plate, round vent, manual and a pack of screws. The baffle filters are dishwasher friendly which will reduce your cleaning time and the stainless steel body can also be cleaned with a wet cloth with warm water. We provides with 10 years motor maintain and 5 years LED lights/switch maintain. Please according the product manual to install the range hood and please feel free to contact us if you need any assistance..
Check Stock

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

  • Dimension: 1.75-2.25 inch adjustable inlet diameter.
  • universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
  • Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

IFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design

  • Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
  • Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
  • Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
  • Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
  • Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..
Check Stock