Reviews Reaming Tool Bit

Klein Tools 85091 Power Conduit Reamer with Improved Bit Retention, 1/2-, 3/4- and 1-Inch

  • Power Conduit Reamer reams 1/2-Inch (13 mm), 3/4-Inch (19 mm) and 1-Inch (25 mm) conduit and install fittings in a fraction of the time.
  • Reduce time on projects with large quantities of conduit runs.
  • Designed to fit into power drill chucks and quick release adapters with improved bit retention.
  • Includes precision engineered replaceable reaming blade.
  • Replacement blades (SKU #19353) are available and the only approved blade for use in our tool.
  • Designed to be used on Electrical Metallic Tubing (EMT).
Check Stock

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

  • Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
  • Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
  • Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
  • Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
  • Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stock

Power Planter Large Bulb Auger- 4"x28" Drill Bit Hole Digger for Post Hole Diggers, Digging Holes- Bulb Planter Tool- Auger Drill for Planting- Garden Auger Digging Tool- 1/2" Non-Slip Hex Drive

  • ...y designed auger drill bit is perfect for various home projects, municipalities, theme parks, playgrounds, and the like. Use our drill attachment to mix paint, fertilizer, or mortar. You can also use it as a shovel alternative or garden auger drill bit for planting anything from small vegetables to larger shrubs by reaming out the hole. Our drill is also a great alternative to your gardening hand bulb planter..
  • IDEAL FOR ANY SOIL TYPE: Our patent-pending ground-hole auger bit is effective for drilling into dirt, clay, rocky soil, and sand. This flexible drill bit has been designed to leave a small amount of loose soil in the bottom of a hole to help a new plant start growing and reduce transplant shock..
  • EASY TO USE: Our auger bit features a 1/2-inch non-slip hex drive that can fit most cordless drills. Tighten the drill chuck to secure the auger, and you're ready to dig. This drill bit auger for planting is perfect for property owners, DIYers, gardeners, and people who love working in the garden or yard..
  • ABOUT US: Power Planter is a third-generation, family-owned auger manufacturer that started three decades ago in rural Illinois and is still located there. The centennial farm where our company began making augers is a sixth-generation family-run....
Check Stock

TIPU 1-3/8

  • Ideal for reaming inside and outside diameters of plastic pipe , polycarbonate tubing, PVC pipe, PE pipe, PPR pipe.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

PAGOW T Handle Taper Reamer, 5-16mm Tapered 6 Hand Held Fluted Chamfer Reaming, Repairman's Bridge Pin Hole Reamer Woodworker Cutting Tools

  • Material: Made of hardened ball bearing steel (#9027) with precision ground cutting edges..
  • Tapered Reamer Diameter:1/8"-1/2"(3-13mm).
  • T-Handle Grip: Provides greater leverage and easier reaming. Provides leverage for easier operation and rotation,saving effort. Removable handle for compact storage..
  • Perfect tool kit for every DIY users to enlarge holes in wood. Suitable for reaming taper holes on wooden boards,chamfering,deburring,easy to screw counterbore..
  • Precision machined cutting edges smooth metal surfaces with little effort. Useful tool for removing burrs from steel, brass, aluminum, plastic, wood and wallboard..
Check Stock

T Handle Tapered Reamer Tool 3-13mm(1/8-1/2 ), 6 Fluted Chamfer Bridge Pin Hole Handheld Chaser, 45# Steel 1/4\ Hex Shank Durable for Chamfering Taper Holes Countersink Latches Guitar

  • CHAMFER REAMING TAPER REAMER: 3-13mm (1/8-1/2) six-blade taper reamer, taper hole, chamfer deburring and other functions, convenient for screw sinking, convenient and quick..
  • PURPOSE 1: Removal of burrs: remove from wood, cut pipes, pipes and ducts. Internal deburring edge tool, the capacity is 1/8" to 1/2"..
  • PURPOSE 2: Enlarged bridge pin hole, headstock, hole for tuner and volume/tone knob.
  • LABOR-SAVING AND CONVENIENT: T-shaped handles can provide leverage, making reaming easier, stronger control, and easier turning.
  • effortlessly processing in sheet metal, plastic and other materials..
  • SIZE: 45#steel, 1/4” Handle 85mm Length + 128mm Length Reamer 3-13mm Reaming diameter range..
Check Stock

GooM Inner-Outer Reamer,3/16-inch to 1-1/2-inch5mm-35mm) Pipe Reamer,Burr Remover for PVC Tubing,Tubing Chamfer Tool,PVC Pipe Deburring Tool,Red

  • Features 3-cutting edges,Ideal for reaming on copper,aluminum,brass and soft steel tubing.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • Sturdy plastic construction with stainless steel blades for extended tool life.
  • Pipe reamer has a 3/16-inch to 1-1/2-inch (5mm to 35mm) outside diameter capacity.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

RIDGID 29993 227S Stainless Steel Pipe Reamer Tool, 1/2-inch to 2-inch Inner/Outer Reamer

  • Ideal for reaming on stainless steel and copper tubing.
  • 45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes.
  • Hardened steel construction for maximum durability.
  • dual inch and metric measurement bar for ease of use.
  • Pipe reamer has a 1/2-inch to 2-inch (12 mm to 50 mm) outside diameter capacity.
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.
Check Stock

MK Morse 116244-MKM 050326116244, multi, one size

  • Applicable Plates: Burr free reaming, suitable for stainless steel, carbon steel, iron plate, aluminum plate, plastic plate, etc..
  • 4Pcs Drilling Tools: Including 3pcs step drill bit and a center punch, commonly used for woodworking grooving, drilling and cutting, etc..
  • Universal Shank: With universal shank type, can be installed on lithium electric drills, hand drills, bench drills and other equipment..
  • High Speed Steel: These drill bits are made of excellent high speed steel, with HRC58‑65 hardness, wear resistant and durable..
  • Multiple Specifications: The step drill can be used to drill holes of different specifications without changing the drill bit, which is convenient and practical..
Check Stock

Carving Bits Wood Engraving Router Bit with 1/8\(3mm) Shank, 20Pcs HSS Different Burr Set to Meet Your Different Needs, Durable Rotary Tools Accessories for DIY Woodworking, Carving

  • 【More Choices, More Uses】A great carving bits set to meet your different needs. 20 Different shape engraving bit of the most commonly used types. To fit different woodworking situations, each Burr is shaped to fit different angles or situations, suitable for engraving, beveling, chamfering, grooving, reaming, hollow..
  • 【High Compatibility】With 1/8 inch(3mm) shank, Length: 1.53inch(39mm). Make these HSS carbide rotary files can work with most rotary tools or die grinders (such as, for Dremel Wen, for Apollo). A valuable addition to any woodworker's rotary tool..
  • 【High Quality】Made of high-speed steel (HSS) and coated with titanium for long life and exceptionally precise cuts, durable, good wear resistance, and heat resistance. Save your time and money..
  • 【Widely Usage】A valuable supplement to woodworking rotating tools. Very suitable for detailed work, such as building and sanding dollhouse furniture, model trains, or miniature buildings and planes. Able to engrave on a wide range of materials including wood, ABS, acrylic, PVC, plastics, etc..
  • 【What You Get】20 Different Shape Rotary Bit Burrs Set and comes with a mini clear storage case, and our worry-free 3-month warranty, and friendly customer service, If YOU have any problems, please ....
Check Stock