Reviews Rca To Xlr

TISINO XLR to RCA Y-Cable, XLR Female to Dual RCA Adapter Y-Splitter Duplicator Lead Unbalanced Stereo Audio Interconnect Cable -10 feet/3 Meters

  • XLR Female to Dual RCA/Phono Male Plug Y Splitter Cable, this cable would be to allow you to output from a mixer console's XLR male output jack, and connect into the RCA inputs on a separate device, it splits a mono XLR signal into two separate mono RCA lines. (Note: Not left and right channels).
  • Unbalanced Connection - XLR PIN 2 is connected to the center RCA pin, XLR PINs 1 & 3 are connected to the ring of the RCA plug (earthed). This adapter is only available in an unbalanced format, it is not possible to make a balanced RCA to XLR adapter. This is an adapter to let you use an XLR mic/ component on your RCA circuit..
  • High-quality gold plated plug, Spring-style strain relief prevents cables from pulling out, corrosion-resistant, 20 AWG 4N oxygen-free copper wire combined with double shielding for best audio quality, excellent signal quality..
  • Heavy Duty Flexible Rubber Jacket, Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response..
  • The XLR connector is a high-quality metal shielded type with positive locking into the microphone.
  • It splits closer to the RCA ends, the distance to the split point is about 20 inches/ 50cm..
Check Stock

Seismic Audio Speakers 3 Foot XLR Dual Male Patch Cable, 2 XLR To 2 RCA Audio Cords

  • Patch Cable: This 3 foot 2-XLR Male to 2-RCA Male cable from Seismic Audio Speakers is great for a variety of audio applications..
  • Male XLR To RCA Cable: Connect line outputs from mixing consoles, microphones, to recorders and amplifiers...anywhere you need to adapt from a male XLR to RCA connection..
  • XLR Audio Cable: This dual XLR cable has heavy duty strain relief and is color coded red and black. The dual RCA cable is covered with a flexible rubber jacket..
  • 3 Foot Cable: This link cable produces without unwanted noise. This is an unbalanced cable..
  • Connectors: This patch cable has 2 XLR Male connectors on one end and 2 RCA Male connectors on the other end..
Check Stock

ONE Little Bear MC3 2-IN-2-OUT XLR Balanced/RCA Converter Audio Selector Splitter Box Passive Preamp XLR to RCA Switch

  • MC3 is a 3-IN-3-OUT (XLR*2 RCA*1) passive audio splitter / audio switch.
  • 2 stereo XLR + 1 stereeo RCA inputs and 2 stereo XLR + 1 stereo RCA outputs.
  • Function 1: switch among sifferent sound sources or amplifiers and compare their sound performance.
  • Function 2: convert signal from balanced XLR to unbalanced RCA or from RCA to XLR.
  • Pure passive device without any impacts on sound quality. Mini size suits very well for desktop and home use..
Check Stock

Preamplifier

  • ►TOPPING Pre90 Preamplifier: Fully balanced amplifier structure for both balanced and single-ended signals. Pre90 could set volume memory for each input or volume memory for each output. More easy operation with the remote controller..
  • ► Selectable XLR / RCA output: The output of Pre90 could be config to “XLR only”, "RCA only" or "XLR + RCA ". Therefore, the amplified signal can be connected to two different amplifiers. Good combination with EXT90 D90..
  • ►Ultra-high Performance NFCA modules: It provides excellent DC and AC performance. Ultra-low noise of 0.3uv is milesahead of the competition, giving an absurdly high dynamic range of 145db and no audible noise and darkest background..
  • ►Ext90 could extend you more inputs: A standard Pre90 provide you 1 x RCA and 1 x XLR stereo inputs. But when it working with a Ext90, they could provide totally 2 x RCA and 4 x XLR stereo inputs. This is enough for multi source systems..
  • ►Relay volume control: A large number of high quality Japanese small signal relayIsed fovolume control of Pre90. Brings the advantages of precise control remote control, longevity, and complete channel balanceIf the volume was set high while turn on or switch in, Pre90 will automatically reduced to a safe volume to avoid your ....
Check Stock

Nobsound Little Bear MC2 Mini Fully-Balanced/Single-Ended Passive Preamp; Hi-Fi Pre-Amplifier; XLR/RCA Volume Controller for Active Monitor Speakers (Black)

  • MC3 is a 3-IN-3-OUT (XLR*2 RCA*1) passive audio splitter / audio switch.
  • 2 stereo XLR + 1 stereeo RCA inputs and 2 stereo XLR + 1 stereo RCA outputs.
  • Function 1: switch among sifferent sound sources or amplifiers and compare their sound performance.
  • Function 2: convert signal from balanced XLR to unbalanced RCA or from RCA to XLR.
  • Pure passive device without any impacts on sound quality. Mini size suits very well for desktop and home use..
Check Stock

Monoprice 104784 3' Premier Series XLR Female to RCA Male 16AWG Cable

  • An XLR to RCA cable converts a balanced audio signal into an unbalanced signal. This is good for sending audio signals from an XLR source to an RCA input, or vice versa. Regardless of direction, the result will be an unbalanced signal..
  • This is a premium quality cable with gold plated connectors at each end. The cable is made with two 16 AWG oxygen-free copper conductors, in a twisted-pair arrangement, and is shielded along the full length with copper braid with 97.5% coverage..
  • This cable uses the standard pinout with pins 1 and 3 of the XLR connector wired to the shield of the RCA plug and pin 2 of the XLR connector wired to the tip of the RCA plug..
  • Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
Check Stock

JOLGOO Unbalanced Dual RCA to XLR Male Y Splitter Patch Microphone Cable, 1 XLR Male to 2 RCA Male Y Adapter Cord Cable, 3.3 Feet

  • High Quality Metal RCA Female to 3 PIN XLR Male Adaptor..
  • This adaptor is designed to adapt a phone plug to an XLR input, XLR pin 3 is grounded resulting in an unbalanced signal..
  • Connection B: RCA Female Jack. XLR PIN-1 and 3 are tied together and carry the Ground via the Chassis, this connects to the Surround of the RCA..
  • The Housing for high strength zinc alloy die-casting nickel plating, attractive and durable..
  • Protective Shielding for RF and EMI noise elimination..
Check Stock

Denafrips ARES II R2R DAC 32Bit/1536kHz Native DSD Balanced Output DAC (215 * 230 * 45mm, Black, 1PCS)

  • Power consumption: 003c30W，Frequency response: ≤0.004% (1KHZ A-weighted).
  • Analog output (RCA): 2.2 (+/-10%) V RMS (1KHz) Analog output (XLR): 4.4 (+/-10%) V RMS (1KHz) Support format (DSD): 2.8224MHZ (DSD1X) All Input 5.6448MHZ (DSD2X), 11.288MHZ (DSD4X) USB Only.
  • Support format: (PCM)24bit/44.1,48,88,2,96,176.4,192,352.8(USB), 384(USB)KHZ SNR: 115dB (RCA) 114dB (XLR) Dynamic range:003e 119dB (RCA), 003e120dB (XLR) Stereo crosstalk: ≤-124dB(RCA), ≤130dB(XLR).
Check Stock

Monoprice XLR Female to RCA Male Cable - 15 Feet - Black With E21Gold Plated Connectors | 16AWG Shielded Twisted Pair Oxygen-Free Copper Braid Conductors - Premier Series

  • An XLR to RCA cable converts a balanced audio signal into an unbalanced signal..
  • This is good for sending audio signals from an XLR source to an RCA input, or vice versa. Regardless of direction, the result will be an unbalanced signal..
  • The cable is made with two 16 AWG oxygen-free copper conductors, in a twisted-pair arrangement, and is shielded along the full length with copper braid with 97.5% coverage..
  • This cable uses the standard pinout with pins 1 and 3 of the XLR connector wired to the shield of the RCA plug and pin 2 of the XLR connector wired to the tip of the RCA plug..
Check Stock

Topping PRE90 Preamplifier Preamp Amplifier Pre-amp Ultra-High NFCA Modules RCA Balanced XLR Output for D90se D90 A90 EXT90 Audio DAC with Remote Control (Black)

  • ►TOPPING Pre90 Preamplifier: Fully balanced amplifier structure for both balanced and single-ended signals. Pre90 could set volume memory for each input or volume memory for each output. More easy operation with the remote controller..
  • ► Selectable XLR / RCA output: The output of Pre90 could be config to “XLR only”, "RCA only" or "XLR + RCA ". Therefore, the amplified signal can be connected to two different amplifiers. Good combination with EXT90 D90..
  • ►Ultra-high Performance NFCA modules: It provides excellent DC and AC performance. Ultra-low noise of 0.3uv is milesahead of the competition, giving an absurdly high dynamic range of 145db and no audible noise and darkest background..
  • ►Ext90 could extend you more inputs: A standard Pre90 provide you 1 x RCA and 1 x XLR stereo inputs. But when it working with a Ext90, they could provide totally 2 x RCA and 4 x XLR stereo inputs. This is enough for multi source systems..
  • ►Relay volume control: A large number of high quality Japanese small signal relayIsed fovolume control of Pre90. Brings the advantages of precise control remote control, longevity, and complete channel balanceIf the volume was set high while turn on or switch in, Pre90 will automatically reduced to a safe volume to avoid your ....
Check Stock