Reviews Rca Noise Filter - BestBuyersPro.com

Rockville USS10 10 800w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub

Rockville USS10 800 Watt 10” Slim Car Subwoofer. 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply. Low Level RCA Input..
High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short....
Green Power/Red Protect LED. Phase Switch : 0° or 180°. Low Pass Filter : 50Hz - 150Hz. Bass Boost : 0 - 12dB @ 45Hz.Subsonic Filter : 20Hz –....
Subwoofer Level Remote Control. Fuse Rating : Single 25A. Maximum Power RMS : 200 Watts. Impedance : 2 Ohm. Dimensions : 15 x 10.89 x 2.9 (L x W X H)....
Frequency Response : 15Hz - 125Hz. Signal to Noise Ratio >82dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity : RCA level 195mV. Input sensitivity :....

Check Stock

ART Precision Phono Preamp

Connect any turntable to a wide variety of audio systems. Perfect for DJs and vinyl enthusiasts.
Moving Coil/Moving Magnet switchable input.

Check Stock

Audio analog VU Level Meter XLR to RCA convert box for amp

VU1 PRO VU meter & audio converter is multi-function box: As a VU meter, with LINE and microphone inputs, can be matched well with most audio devices such as phone, computer, CD players, or speakers etc. As an audio adapter, easily to convert XLR (RCA) input to RCA (XLR) output and with IN/OUT switch, no need to plug in and out cables repeatedly to avoid wearing the contact point of the sockets..
Environment noise filtering, can filter redundant noise and only retain the music from players, the pointer will swing more accurately. AGC and DB mode, the swing of pointer can be proportional (DB mode) or not proportional(AGC mode) to the input level, can be switched to get different display effects and fit different usage requirements..
Dimensions(W*D*H): 152*115*50mm / 5.98*4.53*1.97in.

Check Stock

Four Channel Ground Loop Isolator Audio Noise Filter 4 RCA AP3054

Reduces High Pitched Whine Alternator Noise caused by the car's electrical system.
Always Use High Quality RCA Cables for your Audio System.
Dimensions: 3.4 x 1.5 x 1.5, Unit Weight: .30 Lbs. Tips: Ground each amplifier independently. Same thing if you have added stiffening capacitors, go to a separate ground for the cap.

Check Stock

Universal 70 Amp Audio CB/Radio Noise Filter Suppressor Stereo Car Audio Parts

Reduces High Pitched Whine Alternator Noise caused by the car's electrical system.
Always Use High Quality RCA Cables for your Audio System.
Dimensions: 3.4 x 1.5 x 1.5, Unit Weight: .30 Lbs. Tips: Ground each amplifier independently. Same thing if you have added stiffening capacitors, go to a separate ground for the cap.

Check Stock

BOSS Audio Systems Ground Loop Isolator B25N noise Filter for Car Audio Systems

Reduces High Pitched Whine Alternator Noise caused by the car's electrical system.
Always Use High Quality RCA Cables for your Audio System.
Dimensions: 3.4 x 1.5 x 1.5, Unit Weight: .30 Lbs. Tips: Ground each amplifier independently. Same thing if you have added stiffening capacitors, go to a separate ground for the cap.

Check Stock

Wekuant Audiophiles RCA Cable, 2RCA Male to 2RCA Male HiFi System Silvered-Plated Copper core with ferrite cores, Diameter 6.5mm (2m (6.5 Feet))

Heavy Duty AWG20 Copper conductors and Ultra thick Gold-plated RCA PURE COPPER connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality..
High end design, Conductor made of 3 silvered-plated wires and 4 OFC (oxgree free copper) wires, it has inherent advantage of dual materials, the ratio of copper to silver is 4:3, and it is precisely adjusted to make the sound stable, open and clear..
With two ferrite core noise Filter, superb at reducing EMI electromagnetic interference, the more effectively improve the signal quality of audio..
Works great with Home Theater Systems, Speaker, Hi-Fi Amplifier, HDTV, Turntable, Phono Preamp, Gaming Consoles, A/V Receiver audio equipment or any equipment with 2RCA(Left/Right) Port..
The quality is far superior to other brand used cables, it will hold up well over time. The components used and the thickness of the cable itself set it apart from cheaper cables..

Check Stock

California Project

Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..

Check Stock

Wekuant Audiophiles RCA Cable, 2RCA Male to 2RCA Male HiFi System Silvered-Plated Copper core with ferrite cores, Diameter 6.5mm (0.75m (2.5 Feet))

Heavy Duty AWG20 Copper conductors and Ultra thick Gold-plated RCA PURE COPPER connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality..
High end design, Conductor made of 3 silvered-plated wires and 4 OFC (oxgree free copper) wires, it has inherent advantage of dual materials, the ratio of copper to silver is 4:3, and it is precisely adjusted to make the sound stable, open and clear..
With two ferrite core noise Filter, superb at reducing EMI electromagnetic interference, the more effectively improve the signal quality of audio..
Works great with Home Theater Systems, Speaker, Hi-Fi Amplifier, HDTV, Turntable, Phono Preamp, Gaming Consoles, A/V Receiver audio equipment or any equipment with 2RCA(Left/Right) Port..
The quality is far superior to other brand used cables, it will hold up well over time. The components used and the thickness of the cable itself set it apart from cheaper cables..

Check Stock

200W 15A RCA Noise Suppressor - Designed for Audio Signals & to Eliminate Noise, Isolation Transformer, Used w/ Amplifier or EQ, Install w/ RCA Jacks & Unique Noise Detection Circuit - Pyramid NS20

DESIGNED TO ELIMINATE NOISE: The NS20 Noise Suppressor eliminates unwanted noise and hum without altering car audio natural tone. It's the perfect pedal to quiet down any pedalboard or effects setup.
USED WITH AMPLIFIER OR EQ: Eliminate ground loop humming and buzzing noise between an audio source and an amplifier. When used with car audio, this isolation circuit goes between the head unit and the amp or EQ.
UNIQUE NOISE DETECTION CIRCUIT: Power supply noise of igniter produces filtration effect, make the sound effect is better This NS20 Unique noise detection circuit preserves the natural attack and envelope of an instrument's sound.
RCA PLUGS: When connecting it to your amplifier just plug in the RCA Jacks that fit your amplifier and plug the other end into your Stereo. Tried plugging the RCA cables that were connecting to the amp into it, as well as the radio RCA.
200W & 15A HIGH QUALITY: Keep Safe! The body item is covered by copper material, having high temperature and melting resistant function. Prevent the item from short circuits. Keep safe in your car.

Check Stock