Reviews Rapid Prototyping Software

Seeed Studio LoRa-E5 Development Kit - Based on LoRa-E5 STM32WLE5JC, LoRaWAN Protocol and Worldwide Frequency Supported.

  • ...h Performance】LoRa-E5 Mini Development Board is an easy-to-use compact development toolset for you to unlock the powerful performance of the LoRa-E5 STM32WLE5JC. It consists of a LoRa-E5 Mini Board, an antenna(EU868/US915), a USB type C cable, Sticker and a 1X12pin male pin headers..
  • ✨【Easy Testing and Rapid Prototyping】The sleep current of LoRa-E5 modules on board is as low as 2.1 uA(WOR mode). It is a user-friendly board for easy testing and rapid prototyping..
  • ✨【Full GPIOs Led Out to Rich Interfaces】LoRa-E5 Dev Board also has rich interfaces, including RS-485, Grove, and etc. Developed to unlock the full functionality of the LoRa-E5 module, LoRa-E5 Mini Dev Board has led out full 28 pins of LoRa-E5 and provides with rich interfaces including Grove connectors, RS-485 terminal, male/female pin headers for you to connect sensors and modules with different connectors and data protocols, saving your time on wire soldering..
  • ✨【Long-distance Transmission Range to 10km】LoRa-E5 Mini Dev Board features an ultra-long transmitting range of LoRa-E5 up to 10km in an open area, extremely low chip power consumption, and user-friendly interfaces. Note: Ideal value in open area..
  • ✨【Global LoRaWAN and LoRa Frequency Plan Supported】LoRa-E5 Min....
Check Stock

3D Printing Shirt Eat Print Repeat I 3D Printer Tee T-Shirt

  • Your love 3D printing, rapid prototyping and filaments like pla, abs, petg or tpu? It doesnt matter if printer kit or a plug and play printing....
  • Great gift idea for everybody who loves melting plastics, your husband, uncle, grandpa, friend, man or woman. Nice birthday or christmas present, bday....
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Marvel X-Men Xavier Institute Flight School Blackbird Long Sleeve T-Shirt (Large) Navy

  • The NVIDIA Jetson AGX Orin Developer Kit makes it easy to get started with the Jetson AGX Orin module. Compact size, lots of connectors, and up to 275 TOPS of AI performance make this developer kit perfect for prototyping advanced AI-powered robots and other autonomous machines..
  • Jetson AGX Orin features an NVIDIA Ampere architecture GPU together with next-generation deep learning and vision accelerators, and its high-speed IO and fast memory bandwidth can feed multiple concurrent AI application pipelines. This means you can develop solutions using your largest and most complex AI models to solve problems such as natural language understanding, 3D perception, and multi-sensor fusion..
  • NVIDIA JetPack SDK brings the NVIDIA AI software stack to Jetson, along with application development and optimization tools. Software for specific use cases is available, including Isaac for robotics and Metropolis for smart cities, and you can save significant time developing your AI solution when you use your datasets with TAO toolkit to fine-tune pretrained AI models from the NGC catalog..
  • Jetson ecosystem partners offer additional AI and system software, developer tools, and custom software development. They can also help with cameras and other sensors, as well as carr....
Check Stock

Die Punch Cutter, 7 Pcs Leather Cutting Die DIY Leather Punching Knife Craft Cutting Mold

  • High Quality---The material is high-speed steel, durable and rapid prototyping. This is an imported blade, each with 7 different sizes of die..
  • Multiple Size---This set includes 7pcs leather cutting dies, which meets your different needs. There are 50mm, 45mm, 40mm, 35mm, 30mm, 25mm, 20mm..
  • Design Feature---The product is compact in size for convenient storage and easy to use. Can be used for wallet and belt corner trimming, high cutting efficiency..
  • Easy to Use---Put your leather under the cutting die, then use a hammer to hit the back side of the cutting die..
  • After Sales Service---100% Satisfaction Guarantee. If for any reason you're not 100% Satisfied, please let us know and our customer service team will do our best to help you..
Check Stock

Developing Computer Skills - Binaural Beat Brainwave Subliminal Systems

  • 【Same function as the original Arduino】It great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.
  • 【CHIP UPGRADE】Upgrade the main control chip to ATMEGA328P-AU.And it same as the original arduino pin layout. It compatible with all expansion boards..
  • 【ADDED A 500MA SELF-RECOVERYFUSE】Compared with the original ARDUINO, a 500ma self-recovery fuse is added, which automatically disconnects the circuit when short-circuited to avoid component damage.Change the plug-in pins of the original ARDUINO to SMD pins to avoid short circuit of the development board contact conductors, which is safer..
  • 【Added 10 LED marquees driven by MOS tubes】which avoids the problem of insufficient output current of the IO port of the single-chip microcomputer, and can directly drive a small DC motor through the IO port..
  • 【EASY TO USE】Change the original USB-B type interface to MICRO-USB interface, which is more convenient to use..
Check Stock

ESP8266 ESP-12E NodeMcu Lua WiFi Module Connector Development Board, for Arduino IDE Micropython

  • ESP8266 CP2102 NodeMCU ESP-12E WIFI serial wireless module is an open source Lua based firmware, ultra low cost WI-FI modules, development boards for rapid prototyping, integrated with ESP8266 WIFI chips..
  • Use interactive Lua scripts to write hardware code for Arduino, it offers a complete and self-contained Wi-Fi networking solution..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIO..
  • The NodeMCU ESP8266 development board programming model is similar to that of Node.js, more open source and interactive, programmable, simple, 4-layer PCB design, small size..
  • The has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board, without having to press the flash and reset buttons before each flash operation,simultaneity support smart link smart networking..
Check Stock

Hosyond 3Pcs ESP8266 NodeMCU CP2102 ESP-12E Wireless WiFi Module Internet of Things Development Board Compatible with Arduino IDE/Micropython

  • Not only it is easy to program for this controller by using the CP2102-USB interface,but also unnecessary to press the flash and reset buttons before each flash operation..
  • NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • The ESP8266 has powerful on-board processing and storage capabilities, and can be integrated with sensors and other application-specific devices through its GPIOs..
  • It is compatible with Arduino IDE,works great with the latest Mongoose IoT/Micropython..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

Gikfun Prototype Shield DIY Kit A1 for Arduino Mega 1280 2560 R1 - R3 (Pack of 2pcs) EK1096x2

  • Prototyping Shield Diy Kits. Great for building your own designed Arduino Uno sheilds..
  • You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard to quickly test circuit ideas without having to solder..
  • It's got extra connections for all of the Arduino MEGA 1280 / 2560 R1 R2 R3 pins, and it's got space to mount through-hole and surface mount integrated circuits..
  • The Prototyping Shield makes it easy for you to design custom circuits..
  • It's a convenient way to make your custom circuit and Arduino into a single module..
Check Stock

ELEGOO ABS-Like Resin Rapid UV Curing 405nm Standard Photopolymer Resin ABS 3D Resin High Precision Non Brittle Non Toxic for LCD 3D Printer Grey 1000G

  • 【ABS-Like Resin】 ABS-like resin is designed for reducing volume shrinkage during the photocuring process, thereby ensuring high precision of....
  • 【Fast Curing & Excellent Fluidity】 The UV resin can be rapid prototyping, developed to reduce the forming time with its excellent fluidity. Make....
  • 【Lower Odor and Quality Materials】 This resin is specially designed for 3D printers with ultra-low odor. Optimizes the user's experience during....
  • 【Pure and Vivid Colors】 This 3D resin contains high-quality pigments, which makes the printed works show pure and stunning color effect just like....
  • 【Wide Applicability】 Widely compatible with LCD DLP 3D printers. Apply to DIY, jewelry design, engineering model etc..
Check Stock

Professional Electric Heated Roller Curling Roll Hair Tube No Hair Injury Charging Type Hair Styling Tool

  • Lightweight and compact, easy to carry.It only takes about 3 minutes heat up predetermined temperature.Adopts PTC heat material, heating up quickly and stably.Rechargeable curling iron can reduce the damage and prevent scald. Can create different style large wave hair, beautiful and easy to operate..
  • Ion Hot Rollers are designed to give your hair body, wave, or curl, in less time, with less effort. Unlike old-school hot rollers, these state-of-the-art rollers have the heating element inside each roller..
  • These curl rollers have the PTC heating element on the inside, allowing them fully heat as quickly as 2~4 minutes and remain hot for up to 20 minutes..
  • Don't need to use potions, it does not hurt the hair quality. It can make you hair rapid prototyping, and it is long lasting and electronic thermostat..
  • It has double size rollers, you can make different style.A one-off effect, when you wash your hair, then recover.The roller hair kit is small enough to be considered a travel-sized hot roller set, making it easy to take them wherever you go..
Check Stock