Reviews Ramp With Anti slip Tread

Ruedamann 6'L×8.3\ W Adjustable Aluminum Wheelchair Ramp,600lbs Capacity,Portable Telescoping Non-Skid Surface Wheelchair Ramp for Home, Stairs, Steps

  • 【Anti-slip surface】The wheelchair ramp is lightweight and portable threshold ramp, made from non-rust, slip-proof and water-resistant aluminum.Surface of the wheelchair ramp is pasted with anti-slip film which is with high traction and anti-skid ability..
  • 【Adjustable length】All locks in the wheelchair ramp are made of stainless steel. The bending degree of the locks in the ramp can be adjusted by using tools.You can use the locks to make the wheelchair ramp at any length you want..
  • 【Durable Aluminum】Durable aluminum construction holds up to 600 lb capacity. Aluminum material is relatively soft, the ramp may bend slightly when supporting heavy weight, but its resilience is high and will not affect the use, please rest assured. Perfectly used for manual wheelchairs. Do not use motorcycles or power wheelchairs on this ramp..
  • 【Versatile use】This wheelchair ramp is made for indoor or outdoor steps,stairs,curbs,handicaps,doorways and etc. Non-slip rubber pads placed on the back at the top of the wheelchair ramp for safety use and prevent slip from the using occasions. If the plastic handles are damaged due to transportation, please contact us for mailing..
  • 【Specifications】This ramp is sold in pair.Either of these wheelchair ramps are 6' lon....
Check Stock

Titan Ramps Threshold Ramp 12\ x 32\ Aluminum Wheelchair Walker Furniture

  • 【Quality Material】 The threshold ramp is constructed with quality aluminum material that provides efficiency, anti-rusting and water resistance..
  • 【Humanized Design】 The wheerchair ramp is made for doorways and small thresholds since it is equipped with the dimensions of 10" L * 31.5" W (25*80cm) that can bear the load capacity of 600 lbs (300kg). It is recommended to use this ramp below the height of 1.6" (4cm). Suitable for vehicles with width less than 30" (770mm)..
  • 【Lightweight and Portable】 The door ramp is lightweight since it is composed of aluminum and due to its lightweight efficacy, it is also portable making it perfect for both indoors and outdoors (not good for motorcycles)..
  • 【Anti-Slip Surface】 The threshold ramp offers a surface that is equipped with anti-slip film which is with high traction and anti-skid ability. It also has yellow warning stickers on both sides making it easy to identify the ramp even in dark..
  • 【Easy Installation】 The wheelchair threshold ramp has 2 holes that are perforated for screws, can be used for fixing ramp to ground..
Check Stock

Handi-Treads NSTR-191 EMW5894647, 3.75 x 30, Black

  • Our aluminum non slip Tread is a superior solution vs. Non slip grit tape and grip paint and is permanent and not to rust or wear out.
  • A single non slip safety Tread can be mounted to a wood surface in under a minute with little effort using the provided color matching stainless steel wood screws and directions.
  • Our non slip treads are designed to be mounted outdoors on wood Stairs, wood decks, wood ramps, wood marina decks, and other wood walking surfaces that can become slippery and unsafe. Treads can also be used in garages and basement Stairs.
  • Each 30" Long Tread has 12 (twelve) pre-drilled mounting holes for quick and easy installation.
  • Please contact Handi ramp directly for custom sizes or colors.
Check Stock

BISupply Aluminum Ramp Kit – 8in Truck Ramp Brackets and Rubber Feet, Tailgate Ramp Kit Ramp Plate Kit

  • BUILD YOUR OWN RAMPS: Use the BISupply Aluminum Truck Ramps Loading Ramp Kit to turn simple 2 by 8-inch (5.1 by 20.3 cm) boards into sturdy, all-purpose utility trailer ramps.
  • Each package of ramp parts includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of (2) ramps.
  • 2-inch by 8-inch ramp boards required (not included).
  • Kit weighs just under 6 pounds for easy storage, installation, and handling.
  • DURABLE ALUMINUM RAMP PLATES: Constructed of quality aluminum material ensures that these load ramps are designed for maximum strength and durability.
  • Loading ramp brackets provide reliable stability and resistance to rust and corrosion.
  • Features a 1.37-inch (3.5 cm) board insert space, non-skid threads on the 5 by 7.25-inch (12.7 by 18.4 cm) faceplate, and pre-screwed bolt holes.
  • ANTI-SLIP FEET: Forget about cutting angles to make your ramps sit flat, simply slide one of these 4 by 7.5-inch (10.2 by 19.1 cm) rubber ramp ends for boards on the end of the board and you are ready to load up anything.
  • Anti-slip rubber feet help to hold your ramp in place while loading up your toys.
  • MAXIMUM CAPACITY MEETS YOUR NEEDS: Each set of truck ramp kits has a maximum load capacity of 700 lbs. (....
Check Stock

BISupply Aluminum Ramp Kit – 12in Truck Ramp Brackets and Rubber Feet, Tailgate Ramp Kit Ramp Plate Kit

  • BUILD YOUR OWN RAMPS: Use the BISupply Aluminum Truck Ramps Loading Ramp Kit to turn simple 2 by 12-inch (5.1 by 30.5 cm) boards into sturdy, all-purpose utility trailer ramps.
  • Each package of ramp parts includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of (2) ramps.
  • 2-inch by 12-inch ramp boards required (not included).
  • Kit weighs just under 9 pounds for easy storage, installation, and handling.
  • DURABLE ALUMINUM RAMP PLATES: Constructed of quality aluminum material ensures that these load ramps are designed for maximum strength and durability.
  • Loading ramp brackets provide reliable stability and resistance to rust and corrosion.
  • Features a 1.37-inch (3.5 cm) board insert space, non-skid threads on the 5.4 by 11-inch (13.7 by 27.9 cm) faceplate, and pre-screwed bolt holes.
  • ANTI-SLIP FEET: Forget about cutting angles to make your ramps sit flat, simply slide one of these 4 by 11-inch (10.2 by 27.9 cm) rubber ramp ends for boards on the end of the board and you are ready to load up anything.
  • Anti-slip rubber feet help to hold your ramp in place while loading up your toys.
  • MAXIMUM CAPACITY MEETS YOUR NEEDS: Each set of truck ramp kits has a maximum load capacity of 700 lbs. ....
Check Stock

Ruedamann 12 x 31.5 Inch Portable Threshold Ramp,600 lbs Capacity,Aluminum Ramp for Wheelchair,Doorway Access Anti-Slip Surface Wheelchair Ramp

  • 【Lightweight & Portable】The wheelchair ramp is lightweight and portable threshold ramp, made from non-rust, slip-proof and water-resistant....
  • 【Wheelchair ramps for doorways】This threshold ramp is made for doorways,small thresholds and are to be attached to the edge of the door....
  • 【Anti-slip surface】Surface of the threshold ramp is pasted with anti-slip film which is with high traction and anti-skid ability.Yellow warning....
  • 【Humanized design】Both sides in the top of the wheelchair ramp are perforated for easy installation. You can use screws to fix it wherever you....
  • 【NOTICE】Recommended using height: below 2". Load-bearing：600 lb. Dimensions: 12 inch L x 31.5 inch W.Before purchasing, please make sure that....
Check Stock

VEVOR Door Threshold Ramp, 2' Rise Door Ramp for Wheelchairs, Aluminum Threshold Ramp for Doorways Rated 800 lbs Load Capacity, Adjustable Threshold Ramp for Wheelchairs, Scooters, and Power Chairs

  • ...reshold ramp can be attached or detached to achieve height adjustment for your different needs..
  • Aluminum & Non-slip Surface: Door ramp for the wheelchair is a durable all-aluminum construction. The anodized aluminum door ramp can be rust-proof and scratch-proof for indoor and outdoor usage. What's more, an extruded tread surface for superior traction reduces the risk of slipping..
  • 800 lbs Load Capacity: Thickness: 0.12"/ 3 mm. A heavy-duty aluminum threshold ramp can support up to 800 lbs/ 360 kg. Front edge feet of 7.87"/ 20 cm width can stably stand on the ground. Therefore, the ramp is great for the pass-by of wheelchairs, scooters, walkers, canes, and crutches..
  • Installation & Application: Our door ramp threshold needs no tools to assemble and dismantle. Oval insert connection can easily slide every section together.
  • the lightweight ramp is for mobility solutions from semi-permanent ramps to portable ramps temporary. It is an excellent choice for access ramps for the home, garden, and barn..
Check Stock

PawHut Pet Ramp, Dog Bed Ramp for Dogs with Non-Slip Carpet and Top Platform, 74' x 16' x 25', Natural

  • CUDDLE TIME MADE EASY: Use this ramp to help your dog or cat get up on the sofa all by themselves and enjoy quality time together. This pet ramp can quickly help your dog reach higher places without getting injured and reduce strain on joints, buttocks, and back muscles..
  • SECURE AND SAFE: The anti-slip surface prevents your pet from slipping or falling while using the ramp and allows them to climb securely. A platform on top of the pet ramp offers a place for your dog to rest and sit..
  • QUALITY MATERIAL: This dog ramp has high-quality pine wood with a weight capacity of 77 lbs. that keeps your dog secure while using it..
  • DECORATIVE DESIGN: This bed ramp includes a natural wood finish and a black anti-slip carpet to complement your home décor..
  • PET RAMP INFORMATION: Overall Dimensions: 74" L x 16" W x 25" H.
  • Platform Dimensions: 15.75" L x 11.75" W.
  • Suitable for pets under 77 lbs. Assembly required..
Check Stock

VEVOR Door Threshold Ramp, 1\ Rise Door Ramp for Wheelchairs, Aluminum Threshold Ramp for Doorways Rated 800 lbs Load Capacity, Adjustable Threshold Ramp for Wheelchairs, Scooters, and Power Chairs

  • ...eight adjustment for your different needs. 0.25"/ 6.35 mm of additional height can be achieved..
  • Aluminum & Non-slip Surface: Door ramp for the wheelchair is a durable all-aluminum construction. The anodized aluminum door ramp can be rust-proof and scratch-proof for indoor and outdoor usage. What's more, an extruded tread surface for superior traction reduces the risk of slipping..
  • 800 lbs Load Capacity: Thickness: 0.12"/ 3 mm. A heavy-duty aluminum threshold ramp can support up to 800 lbs/ 360 kg. Front edge feet of 7.87"/ 20 cm width can stably stand on the ground. Therefore, the ramp is great for the pass-by of wheelchairs, scooters, walkers, canes, and crutches..
  • Installation & Application: Our door ramp threshold needs no tools to assemble and dismantle. Oval insert connection can easily slide every section together.
  • the lightweight ramp is for mobility solutions from semi-permanent ramps to portable ramps temporary. It is an excellent choice for access ramps for the home, garden, and barn..
Check Stock

Handi-Treads Non Slip Aluminum Stair Tread, Powder Coated Safety Yellow, 3.75\ x 30\ with Color Matching Wood Screws, Each

  • Our aluminum non slip tread is a superior solution vs. non slip grit tape and grip paint and is permanent and guaranteed not to rust or wear out.
  • A single non slip safety tread can be mounted to a wood surface in under a minute with little effort using the provided color matching stainless steel wood screws and directions.
  • Each 30" long tread has 12 (twelve) pre-drilled mounting holes for quick and easy installation.
  • Our non slip treads are designed to be mounted outdoors on wood stairs, wood decks, wood ramps, wood marina decks, and other wood walking surfaces that can become slippery and unsafe. Treads can also be used in garages and on basement stairs.
  • Please contact Handi Ramp directly for custom sizes or colors.
Check Stock