Reviews Rail Coping Sled

Router Table Coping Sled, Rail Guide Safety Coping Sled Router Table Tenoning Safety Pushing Clamp for Cutting Precise Joints for Cabinet Door Drawer Fronts Carpenters Woodpeckers Woodworking Tools

  • Clear Acrylic Fence: Our coping sled uses the fence as a reference instead. The rail guide coping sled features a clear acrylic fence for reference which is offset and raised 2″ above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place..
  • How It Works: Hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
Check Stock

Rockler Rail Coping Sled for Router Table – Round Handle Router Sled for Firm Grip – Toggle Clamp Features Easy Tool-Free Adjustments - Maximum Workpiece Dimension 5” Wide x 1-1/4” - Router Jigs

  • Coping Sled For Router Table: If you're building cope-and-stick doors and drawer fronts, our new rail coping wood sled will be an indispensable....
  • Smooth-Running Sled: With its smooth-sliding phenolic base, and sturdy toggle clamp holding your stock firmly against the router fence, your rails....
  • Keeps Your Hands Safe: Particularly with drawer fronts, which sometimes use very narrow rails, the rail guide coping sled prevents parts from dipping....
  • Prevent End grain Blowout: A sacrificial block can be attached to the fence to prevent end grain blowout, while an abrasive strip prevents the....
  • What’s Included? Our router table woodworking kit includes a Sled Base, Fixed Fence, Adjustable Fence, Lever Clamp, Sacrificial Piece, Front Handle,....
Check Stock

Woodpeckers Iron-Grip Coping Sled For Router Table, Precision Woodworking Tools

  • UPGRADED COPING SLED – The Iton-Grip Coping Sled improves on our ever-popular original Coping Sled and beefs it up with a stiffer base, larger fence guide and the Iron-Grip clamp..
  • CRYSTAL CLEAR FENCE – It is 3/8″ thick and 15-1/2″ long, making it ideal to work with any router table fence, whether it’s a Woodpeckers fence, another brand or one you’ve built yourself…it handles them all..
  • NEWLY DESIGNED BACK FENCE – It has a T-slot to mount a sacrificial backer. The backer prevents blow-out where the router bit exits your stock. Just chop the end off and slide the piece forward when you change projects. You’ll get three MDF backer boards with your Iron-Grip. When they’re gone you can make your own from scraps or we offer them in convenient 3-packs..
  • MADE IN USA – Like all Woodpecker products, the Iron-Grip Coping Sled is precisely machined and carefully inspected in our Strongsville, Ohio, manufacturing facility..
Check Stock

IRWIN Tools Coping Saw Blades, Coarse, 3-pack (2014500)

  • Designed for use with your existing ProTouch coping saw.
  • Replace damaged or worn-out coping saw blades.
  • These coarse coping saw blades have a tooth count of 17 pt..
  • Use a coping saw for cutting the curved profile on crown, base or chair-rail molding.
Check Stock

FOXBC Coping Saw Blades, 6-1/2 Inch, Coarse, 18 TPI - 10 Pack

  • Designed for use with your existing ProTouch coping saw.
  • Replace damaged or worn-out coping saw blades.
  • These coarse coping saw blades have a tooth count of 18 pt..
  • Use a coping saw for cutting the curved profile on crown, base or chair-rail molding.
Check Stock

Rockler 422866 Router Table Box Joint Jig

  • Fence constructed from MDF with low-friction melamine coating for easy sliding.
  • Precision-machined solid brass indexing keys ensure uniform finger spacing and airtight fit.
  • Cuts 6mm (1/4 Inch), 10 mm (3/8 Inch) and 13 mm (1/2 Inch) box joints on a router table.
  • Smooth-sliding sled features long skis that keep it square to the bit.
  • Ideal for creating coping joints for small and medium boxes and frames.
Check Stock

3-1/2\ To 4-1/2\ Universal Fence Clamp 2 Pack

  • Our 525 Large Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 10" wide. Heavy duty 1/2" phenolic base (15-3/4" x 15-3/4") will not distort from clamp pressure..
  • Features one 500 lb. Outboard Toggle Clamp and two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 24” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Router line Storage Box Power Cord Socket Sorting Box Set-top Box Rack

  • Our 526 Medium Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locatons for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (11-5/8" x 11-3/4") will not distort from clamp pressure..
  • Features two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Peppa Pig - Pumpkin Party

  • 【Universal Fits】Size: 38x11cm/ 14.96x4.3 inch. Suitable for all kick scooter. Suitable for be used downhill, flat snow, sand and grass.
  • 【Durable Material】The ski sled board is made of high quality PE material and has good low temperature resistance. It works fine at -20 degrees....
  • 【Easy Installation】Just remove the axle bolts and wheels on your existing kick scooter and install the the skis in place of wheels.
  • 【Portable】Ski sled board is light and portable, you can take it with you.
  • 【A Gift For Children】The ski dual-use sled is the best gift for your child to enjoy themselves, add a rail kit to your scooter skis and you can....
Check Stock

Phonleya WiFi Router organize Box Set-Top Box Rack Patch Panel Storage Shelf Hider Cord Management Container Storage Box for Desktop

  • Our 528 Small Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (7-5/8" x 11-5/8") will not distort from clamp pressure..
  • Features one 500 lb. Inboard Toggle Clamp. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock