Reviews Raid Rebuild

Intel RAID Controller RS2BL080 - storage controller (RAID) - SATA ... (RS2BL080) -

• Support for non-disk devices and mixed capacity drives.
• Support for intelligent XOR RAID levels 0, 1, 5, 6, 10, 50, and 60.
• Dedicated or global hot spare with auto rebuild if an array drive fails.
• Allows For Staggered Spin-Up, Hot-Plug, And Lower Power Consumption.
• Drive Coercion (Auto-Resizing To Match Existing Disks).

HGST Ultrastar 7K6000 HUS726040ALE610 (0F23005) 4 TB 7200 RPM SATA 6Gb/s 3.5-Inch Internal Hard Drive (Renewed)

• Rebuild Assist and Instant Secure Erase (ISE) Model.
• Ideal for Desktop PCs, Cloud storage, NAS, and RAID arrays.
• Renewed product for cost-effective enterprise storage.
• Factory Refurbished to HGST Specifications.

Intel RAID Controller Supports SATA And SAS SRCSASBB8I

• Intel RAID Controller SRCSASBB8I - storage controller (RAID) - SATA-300 / SAS - PCI Express x8Device TypeStorage controller (RAID) - plug-in cardInterface TypePCI Express x8Dimensions (WxDxH)6.6 in x 2.7 in.
• Interface TypeSerial ATA-300 / SASData Transfer Rate300 MBpsBuffer Size256 MBSupported DevicesHard drive, disk array (RAID)Channel Qty8Max Storage Devices Qty8.
• RAID LevelRAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50, RAID 60System RequirementsRed Hat Linux 5.0, Microsoft Windows Server 2003, MicrosoftWindows Vista, SuSE Linux Enterprise Server 10, Microsoft Windows Server 2003 x64 Edition.

Raid Ant Gel, 1.06 OZ (Pack - 3)

Mediasonic HFR2-SU3S2 PRORAID 4 Bay 3.5' SATA Hard Drive Enclosure - USB 3.0 & eSATA

• Support 3.5″ SATA I / II / III hard disk drive up to 16TB per drive, Support Hard Drive Transfer Rate up to SATA III Speed. Hardware Raid controller built-in on board with one-button control..
• One Button Raid Control support Single Drive Mode, Raid 0 (Spanning) JBOD, Raid 0 (Stripping), Raid 1 (Mirroring), Raid 3 (Stripped set with dedicated parity), Raid 5 (Stripped set with distributed parity), Raid 10 (Mirroring + Striping).
• Transfer rate up to 5.0Gbps via USB 3.0, up to 3.0Gbps via eSATA..
• Smart Fan with built-in thermal-sensor, Auto & Manual modes, and 3 speed levels.
• Compatible with Mac OSX 10.8 or later and Windows 10 / 8.1 / 8 / 7.

Oyen Digital 80TB Mobius 5-Bay FireWire 800, eSATA, USB 3.0 RAID Hard Drive Array (3R5-EB3-80TB)

• Firewire 800 /IEEE 1394b (Up to 100 MB/Sec).
• 80 Terabyte Capacity (Formatted capacity will vary depending on the RAID mode selected).
• JBOD (default), RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, Combine (Span).
• Configures hardware RAID modes easily using mode switches.

Oyen Digital 100TB Mobius 5-Bay FireWire 800, eSATA, USB 3.0 RAID Hard Drive Array, 3R5-EB3-100TB

• Firewire 800 /IEEE 1394b (Up to 100 MB/Sec).
• 100 Terabyte Capacity (Formatted capacity will vary depending on the RAID mode selected).
• JBOD (default), RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, Combine (Span).
• Configures hardware RAID modes easily using mode switches.

5 Slot M.2 B-Key SATA Base SSD PCI-e 3.0 x2 Bandwidth Expansion Card Require x16 Slot SI-PEX40142

• Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
• Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
• The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
• You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
• SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..

Oyen Digital Mobius 5-Bay FireWire 800, eSATA, USB 3.0 Raid Hard Drive Enclosure

• Interface: USB 3.0, eSATA, and FireWire 800.
• Simple RAID configuration via switch settings, no software required.
• RAID 0, RAID 1, RAID 10, RAID 3, RAID 5, SPAN, JBOD.
• Note: We recommend using only Enterprise or NAS drives (512e only). The Mobius is not compatible with 4Kn hard drives..

Cable Matters Internal Mini SAS to Mini SAS Cable (Mini-SAS to Mini-SAS Cable) 3.3 Feet, 1m

• MULTILANE MINI SAS DATA CABLE directly connects a RAID or PCI Express controller to the SAS backplane of a hard drive bay in a server or workstation.
• Internal, multilane cable with Mini SAS 8087 connectors is used for mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a workstation or server.
• LEVERAGE RAID CONTROLLER PERFORMANCE with this straight, 4-lane, high performance internal Mini SAS 4i cable.
• Supports SAS 3.0 12 Gbps performance with compatible SAS or SATA storage systems and hot-swappable SATA/SAS drive bays.
• DIY OR IT PRO INSTALLERS both appreciate the convenience of a heavy duty but flexible cable when expanding storage needs.
• 3 foot mesh harness of internal Mini SAS 36 pin cable is easy to route in tight spaces and provides sufficient length for internal cable management.
• Supports SGPIO feature over integrated internal sideband wires when connected to a managed backplane.
• Ideal component of a professional SAN network.
• ROBUST DESIGN of HBA Host to Target cable includes an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF 8087 connectors with stainless steel latches to ensure a solid connect....