Reviews Quick Exhaust Valve

Blow off valve mod plug Turbo Hiss compatible for ford 13-21 F150 Ecoboost 3.5l 2.7l VTA(black)

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temp....
Check Stock

Mustang Carbon Fiber Trunk Spoiler, GT350 Track Pack Spoiler Carbon Fiber, 2015 Mustang GT Spoiler for 2015-2021 Rear Trunk Wing Racing Spoiler, fit V6, EcoBoost, GT and GT350 2015-21

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. T....
Check Stock

FILOL 2PCS Blue Aluminum Alloy Universal Car Turbo Whistle, Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail (L)

  • ✿After installed this product, the pressure blowing out of your exhaust will make your vehicle sounds like a turbo vehicle with the turbo system or blow off valve..
  • ✿Size Exhaust volume Exhaust Pipe Diameter S:10.26x5.25cm, M:10.3x5.9cm,L:11.6x6.3cm,XL:12x6.9cm.
  • ✿Made of durable material,anti-corrosion and wear resistance.Light weight.Easy to install on the car’s tailpipe..
  • ✿Beautiful appearance, very fashionable,it is the first choice for decorative car.Perfect match and make your car fashionable and unique..
  • ✿KEY: Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large Aluminum Alloy Universal Car Turbo Whistle Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large.
Check Stock

RanBB Fuel Injector Cleaner, Auto Non-Dismantle Fuel Injector Cleaner Tester Air Intake System Cleaning Tool with Carrying Case (GX100 Senior)

  • ✎When the car starts to be unstable and idle and difficult to start, at the same time fuel consumption increases. This may be due to the carbon deposition, residual deposit happening in the fuel system, which affects the normal work. Fuel from disassembly cleaning equipment, the use of simple operation, fast..
  • ✎The system is not only characteristic of high and low pressure cleaning function. At the same time put the function of the whole combustion chamber fuel system of several major functions in one product, such as cleaning throttle valve and the fuel nozzle..
  • ✎Quick joint anti-corrosion, wear-resistant treatment, safe and quick connection..
  • ✎Add liquid and exhaust multi-function valve, spin open can add liquid, light press can slowly decompression, heavy press can be quickly exhaust..
  • ✎To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI..
Check Stock

2.5 inch 63mm Stainless Steel Electric Exhaust Cutout Motor E-cut Valve Kit , Catback Single Y Pipe with One Controller Remote Kit

  • Cut Out Exhaust Pipe Fits For 2.5"/63mm exhaust system.
  • Design to Instantly Increases 20-30 horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. Electrically controlled exhaust valves outflow, simply by flipping the switch..
  • Electric Exhaust Cutout.Voltage: 12V. Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. the valve motor is NOT WATERPROOF, Please don't start work in heavy rain or extremely cold weather.
  • Pipings-Made of high quality T-304 stainless steel with computerized. Mandrel-Bends for strength and durability..
  • 2.5 Inch Electric Exhaust Cutout Valve Kit For all types of vehicles. pls make sure you have enough space to install it. Professional installation is highly recommended.
Check Stock

Edelbrock 60779 Performer RPM Cylinder Head

  • 63cc combustion chamber along with a 171cc intake port.
  • High-flow 2. 02" intake valve and 1. 60 exhaust valve.
  • Includes phosphor-bronze valve guides, interlocking ductile iron valve seats.
  • Intake and exhaust runners are CNC-machine profiled for superior flow and performance.
  • Improved power throughout the RPM range for greater throttle response and top-end horsepower.
Check Stock

3-Way Solenoid Valve 3/8\ with All Fittings (12-Volt)

  • These have an air inlet, an air outlet and an exhaust port..
  • Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
  • Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
  • Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
  • Has two 3/8" air ports and one 3/8" breather port. Comes with: 3/8" 3-Way Solenoid (2) 3/8" Male Straight fittings with 3/8" push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.
Check Stock

E1840P Sloppy Mechanics Stage 2 Camshaft LS7 Lifter 1218 Valve Spring Head Gaskets Bolts Kit for 1997-2007 LS LS1 5.3L 5.7L Engine

  • Cam and lifter kit include: 1 intake seal set, 1 timing cover gasket set, 1 valley cover gasket, 1 oil pan gasket, 2 exhaust manifold gaskets, 1 rear main seal, 1 rear main cover gasket, 2 multilayer steel cylinder head gaskets, 30 cylinder head bolts, 16 ls7 valve lifters, 16 beehive valve springs, 1 e-1840-p camshaft.
  • E1840P camshaft kit fit for 1997-2007 GM Chevy LS L92 L99 5.3L 5.7L V8 LSx Sloppy Stage 2.
  • 16pcs valve springs: outside diameter of outer spring (in): 1.290 in.
  • inside diameter of outer spring (in): 0.885 in.
  • We offer you a 12-month warranty. Any problems, just contact us through email, we ....
Check Stock

BUSIDN 3 inch 76mm Stainless Steel Electric Exhaust Cutout Motor E-cut Valve Kit , Catback Single Y Pipe with One Controller Remote Kit

  • Design to Instantly Increases 20-30 horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. Electrically controlled exhaust valves outflow, simply by flipping the switch..
  • Voltage: 12V. Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. the valve motor is NOT WATERPROOF, Please don’t start work in heavy rain or extremely cold weather.
  • Pipings-Made of high quality T-304 stainless steel with computerized. Mandrel-Bends for strength and durability.
  • 3.0 Inch Electric Exhaust Cutout Valve Kit For all types of vehicles. pls make sure you have enough space to install it.Professional installation is highly recommended.
Check Stock

KAMSIN #1170 Pneumatic Decorative Nailer 11.7mm(7/16-Inch) Head Diameter Air Power Tack Nail Gun Finish Nailer for Upholstering, Leather Cover of Sofaofa (1170 Deco Tack Nail Gun)

  • New 877-307 Head Cap, Gasket, Exhaust Valve Replacement.
  • Compatible With: Hitachi NR83A NR83A2 NR83A2(S) NR83A3.
  • Components include: 884-110 Exhaust valve, 877-854 Gasket, 877-307 Head cap and washer set.
  • The Exhaust Valve is made of aluminum alloy and coated with rubber.
Check Stock