Reviews Qrp Transceiver

Emergency Weather Radio with NOAA/AM/FM, Solar Hand Crank Radio with 5000mAh Rechargeable Battery, Survival Portable Radio with LED Flashlight,Battery Operated, SOS Alarm for Home or Emergency(Green)

  • Reliable Work: A pocket sized 8 band SSB CW QRP transceiver designed with built in lithium battery, built in microphone, PTT button and extremely low RX current consumption, it is a good partner for SOTA, POTA or any other portable activities..
  • Better Design: This QRP SSB CW shortwave transceiver has a large screen, built in battery, charger, built in microphone and speaker. It can be connected to an automatic button. It can also be decode CW coding..
  • IRF Launch Tube: With durable IRF series launch tube, can be used to connect antenna, which is on the instrument base..
  • Simple Structure: All aluminum buttons and translucent silicone buttons, the original transformer qcx circuit is greatly simplified, and the installation components are reduced by 50%. No complicated windings. There is no wiring procedure..
  • High Efficiency: High power efficiency and simple design, thanks to eer electronic level transmitters, also very convenient to carry..
Check Stock

Tecsun H501 Digital Worldband AM/FM Shortwave Longwave Radio with SSB Reception, Dual Speakers, & MP3 Player, Matte Black

  • 【HF VFO /RF Generator 】It has 10kHz to 220MHz working ranges. 0.5PPM high precise Tcxo clock, the frequency is more accurate. Tuning step of 1Hz, 10Hz, 1kHz, 5kHz, 10kHz and 1MHz..
  • 【VFO for Ham SDR HAM QRP Transceiver】 Used as a local oscillator on Homebrew radio receivers (such as superheterodyne, SDR, direct conversion and Homebrew QRP transceivers) ， a simple RF/clock generator for calibration reference or clock generation，a common 128x64 I2C OLED SSD1306 display and Si5351 module..
  • 【Adjustable】Intermediate frequency (IF) offset (+ or -) is adjustable.The bar graph of the signal meter through the analogs input (ADC).I2C data transmission, only need 2 lines it can be connected to the display, with high stability and accuracy of frequency generation.
  • 【20 Band Presets】Equipped with generator function mode.Initial frequency, end frequency, sweep-frequency-step can be set. 20 band presets (shortcuts) for BCB and HAM frequencies.RX/TX mode selector for Homebrew QRP transceivers..
  • 【 Guarantee】 We providing 100% satisfactory service to every customer to make sure our customer can purchase with confidence. If you have any questions, please contact us, we will reply and improve in time..
Check Stock

JUNSHUNTONG HF VFO for Ham SDR QRP Transceiver,20K-220MHz RF Generator Superheterodyne Receiver Debugger,Tcxo Clock,S-Meter, 20 Band presets

  • 【HF VFO /RF Generator 】It has 10kHz to 220MHz working ranges. 0.5PPM high precise Tcxo clock, the frequency is more accurate. Tuning step of 1Hz, 10Hz, 1kHz, 5kHz, 10kHz and 1MHz..
  • 【VFO for Ham SDR HAM QRP Transceiver】 Used as a local oscillator on Homebrew radio receivers (such as superheterodyne, SDR, direct conversion and Homebrew QRP transceivers) ， a simple RF/clock generator for calibration reference or clock generation，a common 128x64 I2C OLED SSD1306 display and Si5351 module..
  • 【Adjustable】Intermediate frequency (IF) offset (+ or -) is adjustable.The bar graph of the signal meter through the analogs input (ADC).I2C data transmission, only need 2 lines it can be connected to the display, with high stability and accuracy of frequency generation.
  • 【20 Band Presets】Equipped with generator function mode.Initial frequency, end frequency, sweep-frequency-step can be set. 20 band presets (shortcuts) for BCB and HAM frequencies.RX/TX mode selector for Homebrew QRP transceivers..
  • 【 Guarantee】 We providing 100% satisfactory service to every customer to make sure our customer can purchase with confidence. If you have any questions, please contact us, we will reply and improve in time..
Check Stock

sara-u 12V Power HAM Radio 40M CW Shortwave QRP Pixie Transmitter Receiver Module 7.023MHz-7.026MHz for DIY Kit CW Receiver Transmitter

  • This circuit is most early by the foreign design,is the most Junior Amateur Radio choice! Kit using amateur radio electric door band....
  • This suite is PIXIE low power transceiver classic, recommend the use of search Pixie QRP,will see a lot of English website of its introduction..
  • This QRP Pixie Kit not fished,is diy kit,suite welding need electronic technology basis,please bring your own multimeter and electric iron tool..
  • when receiving the vibration frequency is 7.023-7.026MHz adjustable,can easily beat frequency, greatly facilitate the primary lovers enjoy radio....
  • Kit consists of the modifications to the original design circuit PIXIE,now launch of the vibration frequency is fixed at 7.023MHz,.
Check Stock

1-30 MHZ Manual Antenna Tuner kit for HAM Radio QRP DIY Kit

  • This antenna tune kit comes with the standing wave directions..
  • Using a T-type topology network, shortwave 1-30MHz..
  • Can withstand the transmit power of 15W..
  • The tuning range of approximately 30-300 ohms..
  • Very convenient for QRP communication, to ensure high efficiency radio transceiver in communication, but also allows you to fully enjoy the fun of....
Check Stock

45W HF Power Amplifier For YASEU FT-817 ICOM IC-703 IC-705 Elecraft KX3 QRP Ham

  • hf power amplifier，for QRP transceiver， Improve signal。Can be used both as a base and mobileunit,Extremely Small Compact and lightweight ， Full integration with the FT-817 using the supplied interface cable, The amplifier incorporates various protection circuits such as high VOLTAGE，front mounted LED display..
  • This amplifier can be successfully used with other QRP rigs such as the ICOM IC-703(and Elecraft KX3)..
  • YAESU FT-817ND Quick operating manual: 1. Connect power cord to DC power supplier, Red to "+", Black to" -" 2. Connect ACC cable to FT-817 ACC and amp 3. Adjustment “BAND ADJ” button， Select the band..
  • 4. Connect antenna to amp "ANT" and "input" from FT-817 antenna out. Notice! The antenna you used that should well tuned, the SWR should less than 1:1.5 5. Open the power on both power supplier and AMP. The power indicate on. 6. Power on FT-817, the band indicate on Amp shoule be on..
  • 7. Press PTT, the TX indicate on Amp should be on.Notice! If working on FM or SSTV for long operating time, should lower the output power on FT-817, say 2.5W or 1W..
Check Stock

Reround USDR USDX 80/40/20/17/15/10M 6 Band SDR All Mode HF SSB QRP Transceiver Compatible with USDX QCX-SSB

  • List of features:Simple, fun and versatile QRP SSB HF transceiver with embedded DSP and SDR functions.
  • Approximately 5W PEP SSB output from 13.8V supply.
  • DSP filters: 3000, 2500, 1700, 500, 200, 100, 50 Hz passband.
Check Stock

Yaesu FT-818 Radio and Accessory Bundle - 3 Items - Includes FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver, LDG Z-817 Automatic Antenna Tuner, and Ham Guides TM Quick Reference Card

  • Yaesu FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver.
Check Stock

HF Transceiver Kit Manual Antenna Tuner Tune DIY Precision Kit 1-30 Mhz for HAM Radio QRP DIY Kit

  • 【DIY Anteena Tuner Kit】This kit welding comes with standing instructions,used to make transceiver and antenna effective match to meet your....
  • 【Q9 Type Interface】Q9 type interface (such as the need to own M-type interface), using T-topology networks, shortwave 1-30MHz. Can withstand the....
  • 【Tuning Matching Range】The antenna impedance matching range is about 30 - 300 ohms, Can be very convenient for QRP communication, to ensure high....
  • 【Purchase Note】This kit is not a ready product but need welding and install by yourself, i believe that you to fully enjoy the fun of DIY..
Check Stock

Cingc TZT USDR USDX SDR Transceiver All Mode 8 Band HF Ham Radio QRP CW Transceiver 80M/60M/40M/30M/20M/17M/15M/10M

  • Simple, fun and versatile QRP SSB HF transceiver with embedded DSP and SDR functions.
  • Approximately 5W PEP SSB output from 13.8V supply.
  • Software-based VOX that can be used as fast Full Break-In (QSK and semi-QSK operation) or assist in RX/TX switching for operating digital modes (no CAT or PTT interface required), external PTT output/PA control with TX-delay.
Check Stock