Reviews Q2u Microphone Stand

Samson Podcasting Kit with Q2U USB/XLR Dynamic Microphone, SR850 Studio Headphones and MBA28 Desktop Boom Arm Stand

  • Everything you need to produce high-quality podcasts - Q2U Dynamic USB/XLR Microphones, MBA28 Boom Arm and SR850 Studio Reference Headphones.
  • Q2U USB/XLR dynamic microphone with a cardioid pickup pattern captures sound from in front of the microphone and less from the side and rear, minimizing ambient sounds and other room noises for podcasting, home recording or voiceover work..
  • Onboard 1/8" (3. 5mm) headphone jack allows for zero-latency monitoring, so you can hear yourself without any delay or echo, plus a mix of your computer audio playback..
  • The Q2U is a plug-and-play device, meaning it doesn’t need any special drivers to work with your computer. Just connect the microphone to your computer, launch your favorite audio software, and start recording..
  • MBA28 highly adjustable microphone boom offers 28” of maximum reach for optimal mic placement..
Check Stock

Universal Metal Shock Mount Studio Recording Microphone Stand Mic Holder silver

  • ◮Anti vibration and noise - This shock mount mic holder can isolate condenser mics from most physical vibration, floor, and stand noise effectively.....
  • ◮Applicable for many mic types - One shock mount is equipped with 4 different bottom screws, which can compatible with multiple microphone styles,....
  • ◮Durable and Adjustable-The shock mount was totally made of Heavy-duty solid metal, except the elastic band and pad. It also came with mounting pads....
  • ◮! NOTE ! - 1. The shock mount is not compatible with handheld mic, such as SM58, Q2U, ATR2100. 2. It’s also not suitable for many USB microphone....
  • ◮Best service - We promise to provide timely response within 24 hours and lifelong technical guidance..
Check Stock

Mictop Desktop Mic Stand Portable Foldable Tripod with Mic Clip Holder Adjustable Microphone Stand For Dynamic Microphone Like Samson Q2U Shure SM58 SM57 PGA48 PGA58 etc.

  • Rugged and Stable Design: With its tripod design on the base, the center of gravity drops in use, it can be very stable on the table and will not easily roll over, even under the action of external force. Its adjustable nature means that you can position the stand in a variety of positions..
  • Suitable for dynamic microphone: Microphone clip with anti-slip and fixed function for all handheld microphone, compatible with ATR2100-USB, AT2005-USB, Samson Q2U, Behringer Xm8500, Shure SM58-LC PGA48/PGA58 and other dynamic microphones..
  • Convenient to carry: This is a versatile professional mic stand for desktop application, suitable for singing, screencasts, studio, podcasts, video chats, meetings, lectures, broadcasts, live interviews and other, which is suitable to be carried anywhere..
  • Easy to use: The package includes two parts, Microphone Tripod and Clip Holder. Internal thread of the microphone clip and standard 3/8" to 5/8" adapter which is attached to the mic clip so it easily screws on.With the screw adapter, this mic stand is also compatible with Blue Yeti, Snowball, Shure SM7B, Shure MV7, Rode PodMic..
  • Note: Make sure one of the three legs is to the front of the mic, otherwise it will topple. Also,it supports a maximum weight of 6.6 lbs, balance a....
Check Stock

InnoGear Mic Stand, Microphone Stand Universal Boom Mic Stand Detachable Mic Stands with Weighted Round Base, Height Adjustable from 34\ to 60\ for Blue Snowball Blue Yeti Shure SM58 Samson Q2U

  • Height & Angle Adjustable: The height of this InnoGear mic stand is adjustable from 34 inches to 60 inches. By adjusting the clutch, you can set up your desired height with ease. The included mic clip can be rotated by 180°. You can adjust the angle of microphone easily while performing..
  • Heavy-duty & Stable Round Base: The weighted round base of the microphone stand weighs 4.5 Lbs in the diameter of 9.8 inches, ensuring solid and durable usage. The bottom of base is built with non-slip pads. A metal gasket is added between the connection of base and the boom mic stand to further enhance stability and avoid any wiggle..
  • Sturdy & Thickened Arm: The upgraded steel arm is thickened to 1.5mm, compared to only 1mm of other microphone stands on the market. It is sturdy enough to hold your microphones, not easy to be deformed. The arm and the base is so stable that the boom stand is not easy to tip over..
  • Detachable & Portable Stand: InnoGear microphone stand can be disassembled into three parts in seconds. It is easy to carry and install which provides great convenience for various types of activities like stage, studio, road show, concert, outdoor performances and more..
  • Wide Applications: This upgraded mic stand fits for most types of microphones like Fifin....
Check Stock

Boseen Microphone Shock Mount Mic Holder, Anti-Vibration Suspension Shock Mount Mic Holder Clip for 43mm-47mm Diameter Condenser Microphone

  • ◇Suitable for Mic Types - Our suspension shock mount is a nice accessory for condenser microphones diameter ranging from 43mm to 47mm, such as Blue Spark/Bluebird/Babybottle, CAD U37/U37 USB, MXL V63M/V250, Sterling LDC/ST51/SP50. Please verify your microphone size before ordering!.
  • ◇Not Suitable for Mic Types - If you use Audio-Technica, Blue Yeti/Snowball/Yeti Nano, Samson g track, Shure SM58/SM48, ATR2100, Samson q2u, MXL990/910/V69XM/550/V67/V67GS, Samson C01/meteor USB/Q2U/C01CUW, Neumann TLM103/102, Razor Seiren, we don't advise you to buy it..
  • ◇Anti Vibration and Noise - The mic holder can isolate studio condenser mics from most physical vibration, floor, and stand noise effectively, it will make your broadcast or singing voice sounds more pleasant..
  • ◇Great Design and Well-made - The main structure is made of aluminum alloy, which improves the grade and extends the service life. The rubber band adopts high quality elastic rope, which can effectively reduce the trill caused by vibration and make the recorded sound more realistic..
  • ◇Note: If you are not satisfied with our products, please feel free to contact us, we will try our best to solve the problem and offer timely and reasonable solutions for you..
Check Stock

OUKMIC Microphone Stand, Adjustable Karaoke Mic Holder for Singing, Universal Floor Standing Detachable Mike Stand with Weighted Round Base, Cable Clip, Barrel Mic Clip and Tray for Kids Adults

  • [Sturdy Materials] The quality and structure of the karaoke microphone stand are top notch. The round base, rod and tray are made from high-quality metal. The diameter of the bottom rod and connecting rod is 20mm, and the diameter of the top rod extension is 16mm, which is thick enough to support the microphone.
  • [Height & Angle Adjustable] The height of stand is adjustable from 33 inches to 58 inches by the clutch. And the included mic clip can be rotated by 180°. It's height can be set to custom heights with ease. So whether you are a child or an adult, it's easy to adjust the mic stand to the perfect height and angle for most any purpose.
  • [Stability & Small Footprint] The Mike Stand decent balance with heavy mic in a standing position. The weight of round base is 4.4 pounds. It can support a microphone and won't tip over. The diameter is 9.8 inches, It takes up very little space. This means you can place it where you need it and not deal with the quick-release tripod "style" legs.
  • [Portable & Detachable] It is easily knock down for storage and taking with you. If you need to pack them up tight for transport, you can easily spin the bases off, pile the bases in a box, and bundle the upright posts together. So you can take the mic stand for closet....
Check Stock

Microphone Shock Mount Mic Holder For Samson Q2U Shure SM58 ATR2100-USB Behringer Xm8500, Mic Clip Holder Mount for Diameter 28mm-32mm Dynamic Microphone Like AT2005-USB Shure PGA48 PGA58, Boseen

  • ♪Anti Vibration and Noise - This shock mount keep the microphone in place, which can effectively reduce the noise picked up by the mic from moving or banging on the table.And also isolate the microphone from bumps, which can eliminate shock and background noises ..
  • ♪Compatibility - Our professional suspension shock mount is compatible with ATR2100-USB, AT2005-USB, Samson Q2U, Behringer Xm8500, Shure SM58-LC PGA48/PGA58 and other condenser microphones between 28mm and 32mm in diameter..
  • ♪Great design and well-made - The mic shock mount features a highly flexible surround design that protects the microphone all-around, which make the microphone more convenient to install and prevent the microphone from falling..
  • ♪HIGH QUALITY - Heavy-duty solid metal and strong rubber bands for durable and sturdy construction, which can be used for long time..
  • ♪Adjustability and Flexibility - Features an angle adjustable locking knob and comes with a 5/8 to 3/8 screw adapter for easy connection to any universal microphone boom or stand..
Check Stock

Suuntok Microphone Shock Mount Mic Holder-Anti Vibration Spider Shockmount Compatible with Many Condenser Microphones Like AT2020 MXL770 MXL990 Samson G Track Pro - Black

  • This shock mount mic holder can isolate condenser mics from most physical vibration, floor, and stand noise effectively. And it’s ideal for....
  • One shock mount is equipped with 4 different bottom screws, which can compatible with multiple microphone styles, for instance, AT(2020, 2020 USB),....
  • The shock mount was totally made of Heavy-duty solid metal, except the elastic band and pad. It also came with mounting pads to protect the bottom of....
  • 1. The shock mount is not compatible with handheld mic, such as SM58, Q2U, ATR2100. 2. It’s also not suitable for many USB microphone with function....
  • We promise to provide timely response within 24 hours and lifelong technical guidance..
Check Stock

Mictop Universal Microphone Shock Mount with Pop Filter for All Microphones Size at 21mm-62mm, Includes Anti-Vibration Mic Holder and Pop Filter (Black)

  • Compatible for Most Microphone - Supports practically all microphones with a diameter of 21-62mm by the four rods such as AT2020/2020USB/2035/2050/2500/2500USB, AKG P120/P420/C3000B, RE20/RE320, MXL 990/770/V67i/V67g, Rode NT1A/NT1, Shure SM58, Samson Q2U, Bluebird, Heil PR40, Razer seiren x, Berhinger C-1, ATR 2500 USB, Neumann TLM102/TLM103 etc..
  • Excellent Anti-vibration - Unique shape gives the shockmount specific compliance to the microphone, isolates mic from physical vibration, floor, and stand noise, prevent unwanted movement of the microphone when you are recording..
  • Made of High-Grade Materials - Give the shockmount an exceptionally wide working temperature of -30deg.C to 60deg.C, far exceeding the range of typical elastic or rubber shockmounts, also prevent the microphone from damage and scratches..
  • Compatible for Most Screw of Stands - The screw of shockmount is compatible for 3/8 and 5/8 thread together,No thread adapter (5/8 to 3/8) needed..
  • Comes with Pop Filter - Package includes pop filter, preventing the dreaded hissing and lisping sounds to make your sound perfect, effectively reduce the plosive, wind interference, saliva spraying..
Check Stock

Mictop Universal Microphone Clip Holder with 5/8\ Male to 3/8\ Female Screw Adapter Suitable for Handheld Microphones, 4 Pack

  • ✲ Suitable for most handheld microphones, such as: Shure SM58, Shure PGA48/PGA58, ATR2100-USB, Samson Q2U, etc..
  • ✲ High Quality Material - Hard and durable plastic, break resistant mic clip, can be used for a long time..
  • ✲ The clip comes with anti-slip dents which can hold the microphone well..
  • ✲ We provide a 5/8" to 3/8" screw adapter for each microphone clip holder, which can match most boom arms and microphone stands..
  • ✲ PACKAGE & SERVICE: 4 x Microphone clip holder(microphone is NOT included). We promise to provide timely response within 24 hours and lifelong technical guidance..
Check Stock