Reviews Pvc Electrical Pipes

PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability..
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

9 Pack | PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability..
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

Sali PVC Pipe Cutter, Cuts up to 1-1/4\

  • 【Capacity】Mainly designed for cutting up to 1-1/4" PEX and PVC and CPVC. lightweight & durable, labor-saving, less fatigue for long-time works.Features a clean and burr-free cut..
  • 【Ergonomic Handle & Portable】The construction of the PEX pipe cutter is solid with a zinc alloy ergonomic handle that does not bend and comfortable to grip for high efficient work. There is a lock hook at the end on one side of the handle makes it easy to carry. It is made just the right size to put in your pocket, convenient to take it anywhere..
  • 【Spring Mechanism】: Built-in spring makes cutting labor-saving, less fatigue, convenient, one hand operation, more efficient and convenient..
  • 【Wide Application】Ideal to cut a variety of pipes such as aluminum pipes, plastic pipes, gas pipes, electrical appliance pipes and more(PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.). It is an essential cutting tool for your home handymen, plumbers, electricians, and vehicle mechanics.
  • 【FREE Bonus & Seller Warranty】We are including replacement blades and essential tools set as a free bonus! We promise 30 days 100% money back warranty or free replacement for any dissatisfaction with our products. Contact us with any questions. Buy with confidence!.
Check Stock

OVO Complet Central Vacuum 3 inlets Installation kit with 50 ft PVC Pipe and Fittings Included White

  • Universal 3 inlets complet installation kit - Compatible with all Central Vacuum using 2'' outer diameter pipes and low-voltage system.
  • 50' PVC Pipes ( 10x5') with 6 pipe stripes.
  • 2x90 T Sahpe Elbow, 10x 90 L shape Elbow, 6x 45 elbow 6 x stop coupling.
  • 50' Of electrical wire - 24V and PVC Solvent Ciment.
Check Stock

Holizzler PVC Plastic Pipe Scissor Cutter (Style A)

  • 1. The pipe cutter made of high-quality steel, rust-resistant and corrosion-resistant and use long service life..
  • 2. The blade sharp, the cutting is convenient, time-saving and labor-saving, and the maintenance efficiency is improved..
  • 3. The design is small and light, beautiful in appearance, easy to carry. Feel comfortable, non-slip feel good..
  • 4. The pipe cutting machine is suitable for cutting PVC pipes, gas pipes, electrical and equipment pipes with a diameter of less than 25mm/1.0 inches..
  • 5. If the spring bow of the tube shear falls off, don't worry, you can easily install it yourself..
Check Stock

HAUTMEC PEX Pipe and Tubing Cutter for Cutting 36mm PVC, CPVC, PPR, PEX, Rubber Hose and Plumbing Pipes, Ideal for Home Work, Handymen and Plumbers HT0256-TC

  • ... resistance and durability. On average, the cutting load is reduced by 20% versus with a blade with a typical coating. Heat-treated blades are not easy to rust or break and stay sharp in the harshest environments.
  • 【Wide Application】Ideal to cut a variety of pipes such as aluminum pipes, plastic pipes, gas pipes, electrical appliance pipes and more(PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.). It is an essential cutting tool for your home handymen, plumbers, electricians, and vehicle mechanics.
  • 【Easy Operation and Ergonomic Handle】 Thickened spring-loaded handle makes positioning more accurate and faster so you can easily make multiple cuts. With non-slip pattern, the handle also takes advantages of the principle of leverage while remaining lightweight. You will not feel the soreness of the palm even if you use it for a long time.
  • 【Safe Design and Portability】Sturdy aluminium construction and big size suitable for heavy-duty use. At the bottom of the tube cutter lies a steel latch for easy storage when you don't use it. It's compact enough to fit in your pocket or tool box so less burden will be caused to you.
Check Stock

Electric Water Pipe Heating Cable with Thermostat for Pipe Freeze Protection, 6ft 120V Snow De-Icing Cable with Build in Thermostat, Pipe Warmer, Heat Pipe Tape - CSA/ETL Listed

  • ✅ 003cb003e[100% Money-Back Guarantee] 003c/b003e--Customer satisfaction is our priority. If for any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked. Buy with confidence!.
  • ✅ [High quality]--UL, ETL and CSA certified,more safer to use.Industrial grade heat shrinkage tube for connection.Each Cable consists of tough XLPE inner insulation, AL foil, a continuous ground braid as well as weather and non-supportive climatic conditions resistant PVC (high-low temperature) outer coating. Can convert 100% of electrical energy into heat without energy loss..
  • ✅ [Note]--Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight. If the ambient temperature is lower than -20°F(-29°C), please use 1" thick insulation material..
  • ✅ [Application]--Suitable for use on water filled plastic ((including PEX)and metal water pipes(including copper, galvanized, ABS plastic, PVC plastic pipes, etc).Not use for empty water pipes, fuel lines, hoses, gutters, steam lines and so on.Keeps water flowing down to -40℃..
Check Stock

Magnetomatic Pipe Locator

  • PIPES IT CAN DETECT: Iron, Steel, Ceramic, Transit, Asbestos Cement & Plastic Pipe (PVC) with or without magnetic tracers.
  • CABLES IT CAN DETECT: Electrical, Telephone, Fiber Optic, Conduit.
  • DETECT ALL THESE UNDERGROUND OR UNDERWATER.
  • Features: No dials No batteries No intricate mechanisms to fail Only one moving assembly Collapses into your hip pocket.
  • Made In The USA PATENTED PRODUCT MUST READ INSTRUCTIONS ON HOW TO USE.
Check Stock

Libraton Pex Cutter 1-1/4\

  • 【Premium Quality】Libraton PVC pipe cutter is made of durable hardness aluminum alloy steel. The thick blade used is of SK4 material with precision sharped..
  • 【Widely Application】The pex pipe cutter (cutting range: up to 1-1/4-inch or up to 31mm) is designed up to cut pipes of various plastic materials (PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.). The tube cutter (cutting range: 1/8inch to 7/8inch or 3-22mm) can be used to cut pipes made of aluminum and copper. It is an essential cutting tool set for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Working with Safety】There is a safe lock in the bottom of pex cutting tool. You can buckle it when you don't use the cutter..
  • 【Reasonable Cutting Tool Composition】The PVC pipe cutting tool set includes three compositions, PVC pipe cutter x1, mini tube cutter x1 and PTFE seal tape x3, which can meet your various need when doing the pipe or tube cutting work..
  • 【Attension】This PEX cutter is suitable for most PEX pipes and thin PVC pipes. IT IS NOT SUITABLE FOR THICK PVC PIPES AND PVC PIPES WITH METAL LAYERS. Also, we offer a 12-month lifetime warranty. We have an after-sale service team here for you to ensure your 100% satisfaction..
Check Stock

Weld-On 10097 705 Industrial Grade PVC Medium-Bodied High Strength Solvent Cement - Fast-Setting and Low-VOC, Clear, 1/2 Pint (8 fl oz)

  • Industrial-grade PVC solvent cement suitable for irrigation, DWV systems, PVC foam core, and electrical conduit applications.
  • Medium-bodied, high-strength gray PVC cement applies smoothly and sets quickly.
  • Low-VOC formula reduces solvent emissions for a better working environment.
  • Compatible with all rigid PVC pipes and fittings up to 6 inches and up to 4 inches Schedule 80.
  • Meets SCAQMD Rule 1168/316A, ASTM D2564, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
  • contributes toward satisfying Indoor Environmental Quality credits (IEQ credit 4.1) for LEED v4.
Check Stock